• 2066 Citations
  • 23 h-Index
1983 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2015

Transient double-diffusive convection in a vertical cavity with Soret and Dufour effects by lattice Boltzmann method on CUDA platform

Ren, Q. & Chan, C., 2015, Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers (ASME), Vol. 8A-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Fluid charge and discharge strategies of dual-media thermal storage systems in the starting-up process of daily cyclic operations

Xu, B., Li, P. & Chan, C., 2014, ASME 2014 8th International Conference on Energy Sustainability, ES 2014 Collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. Web Portal ASME (American Society of Mechanical Engineers), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Lattice Boltzmann simulation of 2D AC electrothermal pump

Ren, Q. & Chan, C., 2014, AIAA AVIATION 2014 -11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference. American Institute of Aeronautics and Astronautics Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Volume sizing for thermal storage with phase change material for Concentrated Solar Power plant

Xu, B., Li, P. & Chan, C., 2014, ASME 2014 8th International Conference on Energy Sustainability, ES 2014 Collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. Web Portal ASME (American Society of Mechanical Engineers), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2013

An enthalpy formulation for thermocline with encapsulated PCM thermal storage and benchmark solution using the method of characteristics

Tumilowicz, E., Chan, C., Xu, B. & Li, P., 2013, ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013. Vol. 1. V001T01A043

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Numerical simulation of 2D electrothermal flow using boundary element method

Ren, Q., Chan, C. & Arvayo, A. L., 2013, ASME 2013 4th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2013. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations
2012

Parametric study simulating the daily operation of a thermocline thermal storage system

Valmiki, M. M., Li, P. & Chan, C., 2012, ASME 2012 6th International Conference on Energy Sustainability, ES 2012, Collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. PARTS A AND B ed. American Society of Mechanical Engineers, p. 1033-1040 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Experimental investigation of thermal storage processes in a thermocline storage tank

Karaki, W., Li, P., Van Lew, J., Valmiki, M. M., Chan, C. & Stephens, J., 2011, ASME 2011 5th International Conference on Energy Sustainability, ES 2011. PARTS A, B, AND C ed. p. 1389-1396 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations
2010

Heat transfer in thermocline storage system with filler materials: Analytical model

Karaki, W., Van Lew, J. T., Li, P., Chan, C. & Stephens, J., 2010, ASME 2010 4th International Conference on Energy Sustainability, ES 2010. Vol. 2. p. 725-734 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

Transient heat delivery and storage process in a thermocline heat storage system

Van Lew, J. T., Li, P., Chan, C., Karaki, W. & Stephens, J., 2010, ASME International Mechanical Engineering Congress and Exposition, Proceedings. American Society of Mechanical Engineers (ASME), Vol. 6. p. 139-148 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations
2007

Buoyancy-driven circulation flow of an electrically conductive liquid in a rectangular annulus

Li, P., Chan, C. & Chen, C. F., 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. Vol. 1. p. 865-871 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2006

Modeling of ultrafast laser ablation into vacuum

Squires, M. & Chan, C., 2006, ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. M302

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations
2005

Effect of recombination on ultrashort pulse laser material removal by coulomb explosion

Viegas, R. B. & Chan, C., 2005, 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. p. 88-94 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2003

Ultrashort pulse laser material removal by coulomb explosion

Jun, H. P. & Chan, C., 2003, ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. M503

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2002

The effect of temporal pulse shape on drilling efficiency

Chan, C., Campbell, D. W. & Paul, A. E., 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrashort pulse laser material removal

Dang, E. & Chan, C., 2002, ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations
1998

Transient heat conduction analysis of electronic packages by coupled boundary and finite element methods

Guven, I., Madenci, E. & Chan, C., 1998, Proceedings - Electronic Components and Technology Conference. IEEE, p. 51-61 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations
1997

Diffusion controlled and convection dominated vaporization

Chan, C., 1997, Laser Institute of America, Proceedings. Pt 1 ed. Laser Inst of America, Vol. 83.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Transient thermal analysis of electronic packages by the boundary element method

Guven, I., Chan, C. & Madenci, E., 1997, Proceedings - Electronic Components and Technology Conference. Anon (ed.). IEEE, p. 279-288 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations
1996

Salt-finger convection in a stratified fluid layer induced by thermal and solutal capillary motion

Chen, C. F. & Chan, C., 1996, NASA Conference Publication. Anon (ed.). 3338 ed. NASA, p. 319-324 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1994

Boundary element formulation of the conjugate heat transfer from a convectively cooled discrete heat source mounted on a substrate

Kabir, H., Ortega, A., Chan, C. & Prince, J. L., 1994, Proceedings - Electronic Components and Technology Conference. Publ by IEEE, p. 403-410 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical solution of conjugate heat transfer in convective cooling of electronics using the boundary element method

Kabir, H., Ramanathan, S., Ortega, A. & Chan, C., 1994, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. ASME, Vol. 299. p. 31-39 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
1993

Analysis of deep penetration laser welding using BEM sensitivity scheme

Lim, J. & Chan, C., 1993, Proceedings of the 1st International Conference on Inverse Problems in Engineering. Publ by ASME, p. 353-359 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1992

Radiation effect in sintering process

Chan, C., 1992, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. Publ by ASME, Vol. 233. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1990

Thermal aspects of machining processes and their design sensitivities. A BEM approach

Chandra, A. & Chan, C., 1990, American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Saigal, S. & Mukherjee, S. (eds.). Publ by ASME, Vol. 115. p. 127-145 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1989

Boundary element method for the heat transfer in metal cutting

Chan, C. & Chandra, A., 1989, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. Publ by ASME, Vol. 113. p. 19-29 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
1987

MATERIALS REMOVAL BY VAPORIZATION AND LIQUID EXPULSION USING A CONCENTRATED HEAT SOURCE.

Chan, C. & Mazumder, J., 1987, Unknown Host Publication Title. ASME, Vol. 3. p. 283-292 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

SOLUTIONS OF HYPERBOLIC HEAT CONDUCTION EQUATIONS WITH VARIABLE PROPERTIES.

Kar, A., Chan, C. & Mazumder, J., 1987, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. ASME, Vol. 69. p. 7-17 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1986

PERTURBATION MODEL FOR THREE-DIMENSIONAL THERMOCAPILLARY CONVECTION IN LASER MELT POOL.

Chan, C., Mazumder, J. & Chen, M. M., 1986, American Society of Mechanical Engineers (Paper). ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

THREE-DIMENSIONAL MODEL FOR CONVECTION IN LASER WELD POOL.

Chan, C., Zehr, R., Mazumder, J. & Chen, M. M., 1986, Unknown Host Publication Title. Kou, S. & Mehrabian, R. (eds.). Metallurgical Soc of AIME, p. 229-246 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Scopus citations
1985

AXIS-SYMMETRY MODEL FOR CONVECTION IN A LASER MELTED POOL.

Chan, C., Mazumder, J. & Chen, M. M., 1985, Unknown Host Publication Title. Metallurgical Soc of AIME, p. 3-16 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

HIGH AND LOW PRANDTL NUMBER LIMITS FOR STAGNATION THERMOCAPILLARY CONVECTION IN THE CENTRAL REGION OF A DEEP MELT POOL DUE TO NON-UNIFORM SURFACE HEATING.

Chan, C., Chen, M. M. & Mazumder, J., 1985, American Society of Mechanical Engineers (Paper). ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

HIGH AND LOW PRANDTL NUMBER LIMITS FOR STAGNATION THERMOCAPILLARY CONVECTION IN THE CENTRAL REGION OF A DEEP MELT POOL DUE TO NON-UNIFORM SURFACE HEATING.

Chan, C., Chen, M. M. & Mazumder, J., 1985, American Society of Mechanical Engineers (Paper). ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

THERMOCAPILLARY CONVECTION IN THE CENTRAL REGION OF A DEEP MELT POOL DUE TO INTENSE, NON-UNIFORM SURFACE HEATING.

Chan, C., Chen, M. M. & Mazumder, J., 1985, American Society of Mechanical Engineers (Paper). ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

THREE-DIMENSIONAL MODEL FOR CONVECTION IN LASER MELTED POOL.

Chan, C., Mazumder, J. & Chen, M. M., 1985, LIA (Laser Institute of America). Laser Inst of America, Vol. 43-48. p. 17-27 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations
1984

FLUID FLOW IN LASER MELTED POOL.

Chan, C., Mazumder, J. & Chen, M. M., 1984, Unknown Host Publication Title. Dantzig, J. A. & Berry, J. T. (eds.). Metallurgical Soc of AIME, p. 297-316 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
1983

MODEL FOR SURFACE TENSION DRIVEN FLUID FLOW IN LASER SURFACE ALLOYING.

Chan, C., Mazumder, J. & Chen, M. M., 1983, Unknown Host Publication Title. Metzbower, E. A. (ed.). ASM, p. 150-157 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Scopus citations

TWO-DIMENSIONAL TRANSIENT MODEL FOR CONVECTION IN LASER MELTED POOLS.

Chan, C., Mazumder, J. & Chen, M. M., 1983, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. ASME, Vol. 10. p. 71-79 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution