A boundary element method analysis of the thermal aspects of metal cutting processes

Cholik Chan, Abhijit Chandra

Research output: Contribution to journalArticle

Abstract

In this paper, the boundary element method (BEM) approach is used to analyze the thermal aspects of steady state metal cutting processes. Particular attention is paid to modeling of the boundary conditions at the tool-chip and the chip-workpiece interfaces. Since the velocities in each of the regions are different, the heat transfer within the tool, the chip, and the workpiece are first calculated separately. A complete model for heat transfer during steady state turning is then obtained by matching the boundary conditions across the primary and the secondary shear zones. An exact expression for matching is developed to avoid any iterations. The temperature fields within the workpiece, the chip, and the tool for various processing conditions are obtained and presented. The numerical results obtained by the BEM are also compared to Jaeger solutions and existing FEM results reported in the literature. The BEM is found to be efficient and robust for this class of steady state conductionconvection problems.

Original languageEnglish (US)
Pages (from-to)311-319
Number of pages9
JournalJournal of Manufacturing Science and Engineering, Transactions of the ASME
Volume113
Issue number3
DOIs
StatePublished - 1991

Fingerprint

Metal cutting
Boundary element method
Boundary conditions
Heat transfer
Temperature distribution
Finite element method
Processing
Hot Temperature

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Mechanical Engineering
  • Computer Science Applications
  • Industrial and Manufacturing Engineering

Cite this

A boundary element method analysis of the thermal aspects of metal cutting processes. / Chan, Cholik; Chandra, Abhijit.

In: Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 113, No. 3, 1991, p. 311-319.

Research output: Contribution to journalArticle

@article{6e73ae47555440999191ff6b963f1fa0,
title = "A boundary element method analysis of the thermal aspects of metal cutting processes",
abstract = "In this paper, the boundary element method (BEM) approach is used to analyze the thermal aspects of steady state metal cutting processes. Particular attention is paid to modeling of the boundary conditions at the tool-chip and the chip-workpiece interfaces. Since the velocities in each of the regions are different, the heat transfer within the tool, the chip, and the workpiece are first calculated separately. A complete model for heat transfer during steady state turning is then obtained by matching the boundary conditions across the primary and the secondary shear zones. An exact expression for matching is developed to avoid any iterations. The temperature fields within the workpiece, the chip, and the tool for various processing conditions are obtained and presented. The numerical results obtained by the BEM are also compared to Jaeger solutions and existing FEM results reported in the literature. The BEM is found to be efficient and robust for this class of steady state conductionconvection problems.",
author = "Cholik Chan and Abhijit Chandra",
year = "1991",
doi = "10.1115/1.2899702",
language = "English (US)",
volume = "113",
pages = "311--319",
journal = "Journal of Manufacturing Science and Engineering, Transactions of the ASME",
issn = "1087-1357",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "3",

}

TY - JOUR

T1 - A boundary element method analysis of the thermal aspects of metal cutting processes

AU - Chan, Cholik

AU - Chandra, Abhijit

PY - 1991

Y1 - 1991

N2 - In this paper, the boundary element method (BEM) approach is used to analyze the thermal aspects of steady state metal cutting processes. Particular attention is paid to modeling of the boundary conditions at the tool-chip and the chip-workpiece interfaces. Since the velocities in each of the regions are different, the heat transfer within the tool, the chip, and the workpiece are first calculated separately. A complete model for heat transfer during steady state turning is then obtained by matching the boundary conditions across the primary and the secondary shear zones. An exact expression for matching is developed to avoid any iterations. The temperature fields within the workpiece, the chip, and the tool for various processing conditions are obtained and presented. The numerical results obtained by the BEM are also compared to Jaeger solutions and existing FEM results reported in the literature. The BEM is found to be efficient and robust for this class of steady state conductionconvection problems.

AB - In this paper, the boundary element method (BEM) approach is used to analyze the thermal aspects of steady state metal cutting processes. Particular attention is paid to modeling of the boundary conditions at the tool-chip and the chip-workpiece interfaces. Since the velocities in each of the regions are different, the heat transfer within the tool, the chip, and the workpiece are first calculated separately. A complete model for heat transfer during steady state turning is then obtained by matching the boundary conditions across the primary and the secondary shear zones. An exact expression for matching is developed to avoid any iterations. The temperature fields within the workpiece, the chip, and the tool for various processing conditions are obtained and presented. The numerical results obtained by the BEM are also compared to Jaeger solutions and existing FEM results reported in the literature. The BEM is found to be efficient and robust for this class of steady state conductionconvection problems.

UR - http://www.scopus.com/inward/record.url?scp=85024526600&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024526600&partnerID=8YFLogxK

U2 - 10.1115/1.2899702

DO - 10.1115/1.2899702

M3 - Article

AN - SCOPUS:85024526600

VL - 113

SP - 311

EP - 319

JO - Journal of Manufacturing Science and Engineering, Transactions of the ASME

JF - Journal of Manufacturing Science and Engineering, Transactions of the ASME

SN - 1087-1357

IS - 3

ER -