A new three-piece driver model with RLC interconnect load

Lakshmi K. Vakati, Kishore K. Muchherla, Janet M. Wang

Research output: Contribution to journalArticle

1 Scopus citations

Abstract

The scaled down feature size and the increased frequency of today's deep sub-micron region call for fundamental changes in driver-load models. To be more specific, new driver-load models need to take into consideration the nonlinear behavior of the drivers, the inductance effects of the loads, and the slew rates of the output waveforms. Current driver-load models use the conventional single Ceff (one-ramp) approach and treat the interconnect load as lumped RC networks. Neither the non-linear property nor the inductance effects were considered. The accuracy of these existing models is therefore questionable. This paper introduces a new multi-ramp driver model that represents the interconnect load as a distributed RLC network. The employed two effective capacitance values capture the nonlinear behavior of the driver. The lossy transmission line approach accounts for the impact of inductance when modeling the driving point interconnect load. The new model shows improvements of 9% in the average delay error and 2.2% in the slew rate error compared to SPICE.

Original languageEnglish (US)
Pages (from-to)2206-2215
Number of pages10
JournalIEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
VolumeE88-A
Issue number8
DOIs
StatePublished - Aug 2005

Keywords

  • Effective capacitance
  • Inductance criteria
  • Interconnect model
  • Multi-ramp driver model

ASJC Scopus subject areas

  • Signal Processing
  • Computer Graphics and Computer-Aided Design
  • Electrical and Electronic Engineering
  • Applied Mathematics

Fingerprint Dive into the research topics of 'A new three-piece driver model with RLC interconnect load'. Together they form a unique fingerprint.

  • Cite this