An observational approach for determining aerosol surface radiative forcing

Results from the first field phase of INDOEX

Research output: Contribution to journalArticle

51 Citations (Scopus)

Abstract

This paper presents one of the few quantitative estimates of surface aerosol forcing made directly from surface irradiance observations. The method described within yields estimates of the forcing accurate to 20%. The study was conducted from February to March 1998 at the Kaashidhoo Climate Observatory (KCO) during the First Field Phase of the Indian Ocean Experiment (INDOEX-FFP). For the 400-700 nm region studied here, the forcing is -7.6 ± 1.5 W m-2. The data are obtained from two photodiode radiometers measuring global and diffuse irradiance in five channels in the visible and ultraviolet. The instruments were chosen, calibrated, and deployed specifically for a precise measurement of aerosol forcing. The angular, spectral, and absolute response characteristics of the instruments are determined in the laboratory and used to calibrate the data, as described here. The accuracy in the calibrated data is 2.4% for the global irradiance and 1.8% for the diffuse irradiance. Direct aerosol forcing is obtained from the measured aerosol forcing efficiency, which is determined by two methods: hybrid and differential. The hybrid method uses a radiative transfer model to subtract out the contribution from the aerosol-free atmosphere. The differential method assumes that changes in 400-700 nm solar flux are forced by changes in aerosol optical depth. By using flux changes, the differential method is not sensitive to the small calibration uncertainties, and is independent of model assumptions about the single-scatter properties of the aerosol. For this soot-laden marine region south of India, a 0.1 change in aerosol optical depth produces a -4.0 ± 0.8 W m-2 change in the 400-700 nm surface flux; 55% of this forcing is observed in the 400-540 nm region. The global and diffuse data agree to within 5 W m-2 of results calculated by a Monte Carlo radiative transfer model. The model assumes an aerosol consistent with the spectral optical depth, lidar vertical profiles, and surface optical properties measured simultaneously at KCO.

Original languageEnglish (US)
Article number1999JD901166
Pages (from-to)15347-15360
Number of pages14
JournalJournal of Geophysical Research: Space Physics
Volume105
Issue numberD12
StatePublished - Jun 27 2000
Externally publishedYes

Fingerprint

radiative forcing
Aerosols
aerosols
aerosol
irradiance
optical thickness
optical depth
Radiative transfer
Observatories
Fluxes
radiative transfer
climate
observatories
observatory
free atmosphere
Soot
solar flux
Indian Ocean
soot
Optical radar

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Geophysics
  • Earth and Planetary Sciences (miscellaneous)
  • Space and Planetary Science
  • Atmospheric Science
  • Astronomy and Astrophysics
  • Oceanography

Cite this

@article{5109d4edd3c14c5eae8345556c46b732,
title = "An observational approach for determining aerosol surface radiative forcing: Results from the first field phase of INDOEX",
abstract = "This paper presents one of the few quantitative estimates of surface aerosol forcing made directly from surface irradiance observations. The method described within yields estimates of the forcing accurate to 20{\%}. The study was conducted from February to March 1998 at the Kaashidhoo Climate Observatory (KCO) during the First Field Phase of the Indian Ocean Experiment (INDOEX-FFP). For the 400-700 nm region studied here, the forcing is -7.6 ± 1.5 W m-2. The data are obtained from two photodiode radiometers measuring global and diffuse irradiance in five channels in the visible and ultraviolet. The instruments were chosen, calibrated, and deployed specifically for a precise measurement of aerosol forcing. The angular, spectral, and absolute response characteristics of the instruments are determined in the laboratory and used to calibrate the data, as described here. The accuracy in the calibrated data is 2.4{\%} for the global irradiance and 1.8{\%} for the diffuse irradiance. Direct aerosol forcing is obtained from the measured aerosol forcing efficiency, which is determined by two methods: hybrid and differential. The hybrid method uses a radiative transfer model to subtract out the contribution from the aerosol-free atmosphere. The differential method assumes that changes in 400-700 nm solar flux are forced by changes in aerosol optical depth. By using flux changes, the differential method is not sensitive to the small calibration uncertainties, and is independent of model assumptions about the single-scatter properties of the aerosol. For this soot-laden marine region south of India, a 0.1 change in aerosol optical depth produces a -4.0 ± 0.8 W m-2 change in the 400-700 nm surface flux; 55{\%} of this forcing is observed in the 400-540 nm region. The global and diffuse data agree to within 5 W m-2 of results calculated by a Monte Carlo radiative transfer model. The model assumes an aerosol consistent with the spectral optical depth, lidar vertical profiles, and surface optical properties measured simultaneously at KCO.",
author = "Conant, {William C}",
year = "2000",
month = "6",
day = "27",
language = "English (US)",
volume = "105",
pages = "15347--15360",
journal = "Journal of Geophysical Research: Space Physics",
issn = "2169-9380",
publisher = "Wiley-Blackwell",
number = "D12",

}

TY - JOUR

T1 - An observational approach for determining aerosol surface radiative forcing

T2 - Results from the first field phase of INDOEX

AU - Conant, William C

PY - 2000/6/27

Y1 - 2000/6/27

N2 - This paper presents one of the few quantitative estimates of surface aerosol forcing made directly from surface irradiance observations. The method described within yields estimates of the forcing accurate to 20%. The study was conducted from February to March 1998 at the Kaashidhoo Climate Observatory (KCO) during the First Field Phase of the Indian Ocean Experiment (INDOEX-FFP). For the 400-700 nm region studied here, the forcing is -7.6 ± 1.5 W m-2. The data are obtained from two photodiode radiometers measuring global and diffuse irradiance in five channels in the visible and ultraviolet. The instruments were chosen, calibrated, and deployed specifically for a precise measurement of aerosol forcing. The angular, spectral, and absolute response characteristics of the instruments are determined in the laboratory and used to calibrate the data, as described here. The accuracy in the calibrated data is 2.4% for the global irradiance and 1.8% for the diffuse irradiance. Direct aerosol forcing is obtained from the measured aerosol forcing efficiency, which is determined by two methods: hybrid and differential. The hybrid method uses a radiative transfer model to subtract out the contribution from the aerosol-free atmosphere. The differential method assumes that changes in 400-700 nm solar flux are forced by changes in aerosol optical depth. By using flux changes, the differential method is not sensitive to the small calibration uncertainties, and is independent of model assumptions about the single-scatter properties of the aerosol. For this soot-laden marine region south of India, a 0.1 change in aerosol optical depth produces a -4.0 ± 0.8 W m-2 change in the 400-700 nm surface flux; 55% of this forcing is observed in the 400-540 nm region. The global and diffuse data agree to within 5 W m-2 of results calculated by a Monte Carlo radiative transfer model. The model assumes an aerosol consistent with the spectral optical depth, lidar vertical profiles, and surface optical properties measured simultaneously at KCO.

AB - This paper presents one of the few quantitative estimates of surface aerosol forcing made directly from surface irradiance observations. The method described within yields estimates of the forcing accurate to 20%. The study was conducted from February to March 1998 at the Kaashidhoo Climate Observatory (KCO) during the First Field Phase of the Indian Ocean Experiment (INDOEX-FFP). For the 400-700 nm region studied here, the forcing is -7.6 ± 1.5 W m-2. The data are obtained from two photodiode radiometers measuring global and diffuse irradiance in five channels in the visible and ultraviolet. The instruments were chosen, calibrated, and deployed specifically for a precise measurement of aerosol forcing. The angular, spectral, and absolute response characteristics of the instruments are determined in the laboratory and used to calibrate the data, as described here. The accuracy in the calibrated data is 2.4% for the global irradiance and 1.8% for the diffuse irradiance. Direct aerosol forcing is obtained from the measured aerosol forcing efficiency, which is determined by two methods: hybrid and differential. The hybrid method uses a radiative transfer model to subtract out the contribution from the aerosol-free atmosphere. The differential method assumes that changes in 400-700 nm solar flux are forced by changes in aerosol optical depth. By using flux changes, the differential method is not sensitive to the small calibration uncertainties, and is independent of model assumptions about the single-scatter properties of the aerosol. For this soot-laden marine region south of India, a 0.1 change in aerosol optical depth produces a -4.0 ± 0.8 W m-2 change in the 400-700 nm surface flux; 55% of this forcing is observed in the 400-540 nm region. The global and diffuse data agree to within 5 W m-2 of results calculated by a Monte Carlo radiative transfer model. The model assumes an aerosol consistent with the spectral optical depth, lidar vertical profiles, and surface optical properties measured simultaneously at KCO.

UR - http://www.scopus.com/inward/record.url?scp=0033787762&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033787762&partnerID=8YFLogxK

M3 - Article

VL - 105

SP - 15347

EP - 15360

JO - Journal of Geophysical Research: Space Physics

JF - Journal of Geophysical Research: Space Physics

SN - 2169-9380

IS - D12

M1 - 1999JD901166

ER -