Analysis and Design of Coupled-Cavity Lasers—Part I: Threshold Gain Analysis and Design Guidelines

Larry A. Coldren, T. L. Koch

Research output: Contribution to journalArticle

81 Scopus citations

Abstract

The analysis and design of two-section and multisection coupled-cavity lasers are treated in two parts. In this first part, the focus is on two-section laser design and control using threshold gains. In the second part numerical analysis of the transient behavior is given. The present treatment begins by using the poles of a linear transfer function for the coupled-cavity laser to obtain mode wavelengths and wavelength dependent threshold gains. A general wave scattering matrix describes the intercavity coupling, so that simple waveguide discontinuities or complex arrays of discontinuities can be modeled. Numerical examples are given. Design relationships obtained primarily from the scattering analysis, together with numerical examples, show the dependence and interdependence of the laser mode wavelengths and threshold gain minima on various parameters such as cavity and coupler lengths, indexes of refraction, and gains. These relationships show optimum or preferred coupling gap lengths and cavity length ratios for various design criteria. For example, for optimum mode and spurious rejection stability a short (≲40 μm) cavity can be coupled via a gap approximately an integer number of half wavelengths long to a second longer cavity (— 100—250 μm). Conversely, for maximum tunability (or sensitivity to input changes) together with good mode selectivity, two medium length cavities (~ 100–250 μm) differing in length by a small amount (≲40 μm) should be chosen.

Original languageEnglish (US)
Pages (from-to)659-670
Number of pages12
JournalIEEE Journal of Quantum Electronics
Volume20
Issue number6
DOIs
StatePublished - Jun 1984
Externally publishedYes

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Analysis and Design of Coupled-Cavity Lasers—Part I: Threshold Gain Analysis and Design Guidelines'. Together they form a unique fingerprint.

  • Cite this