Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation

Bernhard Röntsch, Lutz Taubert, Philipp Tewes, Jesse C Little, Israel J Wygnanski

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Fluidic oscillators located along the hinge of a flapped trapezoidal wing are used to augment the lift generated by such a planform. The semi-span model has an aspect ratio of 1.15 and a taper ratio of 0.27. The flap hinge spans the entire wing and it is parallel to the trailing edge. Experiments are performed in a low-speed wind tunnel at approximate Reynolds numbers of 1.7×106 over a wide range of incidence (-8° to 24°) and flap deflection angles (0° to 75°). The baseline flow on the deflected flap surface prior to total separation is oriented along the span (inboard) and its direction changes to outboard depending on incidence and flap deflection. The attached spanwise flow can be redirected, but most of the lift enhancement is realized when separation is avoided by the use of Active Flow Control (AFC). Integral force and moment results are supported by tuft flow visualization and pressure sensitive paint thus explaining the flow phenomena. In addition, the influence of non-uniform and high turbulence inflow on the efficacy of active flow control is investigated.

Original languageEnglish (US)
Title of host publication8th AIAA Flow Control Conference
PublisherAmerican Institute of Aeronautics and Astronautics Inc, AIAA
ISBN (Print)9781624104329
StatePublished - 2016
Event8th AIAA Flow Control Conference, 2016 - Washington, United States
Duration: Jun 13 2016Jun 17 2016

Other

Other8th AIAA Flow Control Conference, 2016
CountryUnited States
CityWashington
Period6/13/166/17/16

Fingerprint

Low aspect ratio wings
Hinges
Flow control
Planforms
Fluidics
Flow visualization
Paint
Wind tunnels
Aspect ratio
Reynolds number
Turbulence
Experiments

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes
  • Control and Systems Engineering
  • Aerospace Engineering

Cite this

Röntsch, B., Taubert, L., Tewes, P., Little, J. C., & Wygnanski, I. J. (2016). Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation. In 8th AIAA Flow Control Conference American Institute of Aeronautics and Astronautics Inc, AIAA.

Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation. / Röntsch, Bernhard; Taubert, Lutz; Tewes, Philipp; Little, Jesse C; Wygnanski, Israel J.

8th AIAA Flow Control Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Röntsch, B, Taubert, L, Tewes, P, Little, JC & Wygnanski, IJ 2016, Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation. in 8th AIAA Flow Control Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, 8th AIAA Flow Control Conference, 2016, Washington, United States, 6/13/16.
Röntsch B, Taubert L, Tewes P, Little JC, Wygnanski IJ. Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation. In 8th AIAA Flow Control Conference. American Institute of Aeronautics and Astronautics Inc, AIAA. 2016
Röntsch, Bernhard ; Taubert, Lutz ; Tewes, Philipp ; Little, Jesse C ; Wygnanski, Israel J. / Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation. 8th AIAA Flow Control Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, 2016.
@inproceedings{00769fdf8310445ba07e78427545dde2,
title = "Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation",
abstract = "Fluidic oscillators located along the hinge of a flapped trapezoidal wing are used to augment the lift generated by such a planform. The semi-span model has an aspect ratio of 1.15 and a taper ratio of 0.27. The flap hinge spans the entire wing and it is parallel to the trailing edge. Experiments are performed in a low-speed wind tunnel at approximate Reynolds numbers of 1.7×106 over a wide range of incidence (-8° to 24°) and flap deflection angles (0° to 75°). The baseline flow on the deflected flap surface prior to total separation is oriented along the span (inboard) and its direction changes to outboard depending on incidence and flap deflection. The attached spanwise flow can be redirected, but most of the lift enhancement is realized when separation is avoided by the use of Active Flow Control (AFC). Integral force and moment results are supported by tuft flow visualization and pressure sensitive paint thus explaining the flow phenomena. In addition, the influence of non-uniform and high turbulence inflow on the efficacy of active flow control is investigated.",
author = "Bernhard R{\"o}ntsch and Lutz Taubert and Philipp Tewes and Little, {Jesse C} and Wygnanski, {Israel J}",
year = "2016",
language = "English (US)",
isbn = "9781624104329",
booktitle = "8th AIAA Flow Control Conference",
publisher = "American Institute of Aeronautics and Astronautics Inc, AIAA",

}

TY - GEN

T1 - Application of active flow control to a generic low aspect-ratio trapezoidal wing for high lift generation

AU - Röntsch, Bernhard

AU - Taubert, Lutz

AU - Tewes, Philipp

AU - Little, Jesse C

AU - Wygnanski, Israel J

PY - 2016

Y1 - 2016

N2 - Fluidic oscillators located along the hinge of a flapped trapezoidal wing are used to augment the lift generated by such a planform. The semi-span model has an aspect ratio of 1.15 and a taper ratio of 0.27. The flap hinge spans the entire wing and it is parallel to the trailing edge. Experiments are performed in a low-speed wind tunnel at approximate Reynolds numbers of 1.7×106 over a wide range of incidence (-8° to 24°) and flap deflection angles (0° to 75°). The baseline flow on the deflected flap surface prior to total separation is oriented along the span (inboard) and its direction changes to outboard depending on incidence and flap deflection. The attached spanwise flow can be redirected, but most of the lift enhancement is realized when separation is avoided by the use of Active Flow Control (AFC). Integral force and moment results are supported by tuft flow visualization and pressure sensitive paint thus explaining the flow phenomena. In addition, the influence of non-uniform and high turbulence inflow on the efficacy of active flow control is investigated.

AB - Fluidic oscillators located along the hinge of a flapped trapezoidal wing are used to augment the lift generated by such a planform. The semi-span model has an aspect ratio of 1.15 and a taper ratio of 0.27. The flap hinge spans the entire wing and it is parallel to the trailing edge. Experiments are performed in a low-speed wind tunnel at approximate Reynolds numbers of 1.7×106 over a wide range of incidence (-8° to 24°) and flap deflection angles (0° to 75°). The baseline flow on the deflected flap surface prior to total separation is oriented along the span (inboard) and its direction changes to outboard depending on incidence and flap deflection. The attached spanwise flow can be redirected, but most of the lift enhancement is realized when separation is avoided by the use of Active Flow Control (AFC). Integral force and moment results are supported by tuft flow visualization and pressure sensitive paint thus explaining the flow phenomena. In addition, the influence of non-uniform and high turbulence inflow on the efficacy of active flow control is investigated.

UR - http://www.scopus.com/inward/record.url?scp=84980045863&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84980045863&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9781624104329

BT - 8th AIAA Flow Control Conference

PB - American Institute of Aeronautics and Astronautics Inc, AIAA

ER -