Biopolymer stabilization of mine tailings

Rui Chen, Lianyang Zhang, Muniram Budhu

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

A feasibility study was performed on using xanthan gum and guar gum, two biopolymers that are naturally occurring and inexpensive, to stabilize mine tailings (MT). The simple fall cone method was adopted to evaluate the liquid limit and undrained shear strength of sundried MT mixed with xanthan gum or guar gum solutions at different concentrations. Environmental scanning electron microscopy (ESEM) imaging was also conducted to study the microstructure of the biopolymer-MT system. The results indicate that the inclusion of xanthan gum or guar gum increases both the liquid limit and the undrained shear strength of the MT, higher biopolymer concentrations leading to greater increases. The increase of the liquid limit and undrained shear strength of the MT mixed with a biopolymer solution is mainly attributable to the high viscosity of the biopolymer pore fluid and the bonding between the biopolymer and the MT particles. Guar gum is more effective than xanthan gum in increasing the liquid limit and undrained shear strength of the MT, because the guar gum solution is more viscous than the xanthangumsolution at the same concentration, the guargum-MTparticle bonding is stronger than the xanthan gum-MTparticle bonding, and guar gum causes a lower degree of aggregation of MT particles than xanthan gum. By comparing the undrained shear strength data with empirical equations in the literature, two new equations were proposed for predicting the undrained shear strength of the MT mixed with a biopolymer for water contents near the liquid limit, based on the liquid limit and water content, and the liquidity index, respectively.

Original languageEnglish (US)
Pages (from-to)1802-1807
Number of pages6
JournalJournal of Geotechnical and Geoenvironmental Engineering
Volume139
Issue number10
DOIs
StatePublished - 2013

Fingerprint

Biopolymers
Tailings
tailings
Xanthan gum
liquid limit
stabilization
Stabilization
Shear strength
shear strength
Liquids
Water content
water content
feasibility study
Cones
microstructure
viscosity
Agglomeration
scanning electron microscopy
Viscosity
Imaging techniques

Keywords

  • Biopolymer
  • Environmental scanning electron microscopy
  • Fall cone method
  • Guar gum
  • Liquid limit
  • Mine tailings
  • Undrained shear strength
  • Xanthan gum

ASJC Scopus subject areas

  • Environmental Science(all)
  • Geotechnical Engineering and Engineering Geology

Cite this

Biopolymer stabilization of mine tailings. / Chen, Rui; Zhang, Lianyang; Budhu, Muniram.

In: Journal of Geotechnical and Geoenvironmental Engineering, Vol. 139, No. 10, 2013, p. 1802-1807.

Research output: Contribution to journalArticle

Chen, Rui ; Zhang, Lianyang ; Budhu, Muniram. / Biopolymer stabilization of mine tailings. In: Journal of Geotechnical and Geoenvironmental Engineering. 2013 ; Vol. 139, No. 10. pp. 1802-1807.
@article{f7ff897e7bf24c278bd9f4910dc5ed2a,
title = "Biopolymer stabilization of mine tailings",
abstract = "A feasibility study was performed on using xanthan gum and guar gum, two biopolymers that are naturally occurring and inexpensive, to stabilize mine tailings (MT). The simple fall cone method was adopted to evaluate the liquid limit and undrained shear strength of sundried MT mixed with xanthan gum or guar gum solutions at different concentrations. Environmental scanning electron microscopy (ESEM) imaging was also conducted to study the microstructure of the biopolymer-MT system. The results indicate that the inclusion of xanthan gum or guar gum increases both the liquid limit and the undrained shear strength of the MT, higher biopolymer concentrations leading to greater increases. The increase of the liquid limit and undrained shear strength of the MT mixed with a biopolymer solution is mainly attributable to the high viscosity of the biopolymer pore fluid and the bonding between the biopolymer and the MT particles. Guar gum is more effective than xanthan gum in increasing the liquid limit and undrained shear strength of the MT, because the guar gum solution is more viscous than the xanthangumsolution at the same concentration, the guargum-MTparticle bonding is stronger than the xanthan gum-MTparticle bonding, and guar gum causes a lower degree of aggregation of MT particles than xanthan gum. By comparing the undrained shear strength data with empirical equations in the literature, two new equations were proposed for predicting the undrained shear strength of the MT mixed with a biopolymer for water contents near the liquid limit, based on the liquid limit and water content, and the liquidity index, respectively.",
keywords = "Biopolymer, Environmental scanning electron microscopy, Fall cone method, Guar gum, Liquid limit, Mine tailings, Undrained shear strength, Xanthan gum",
author = "Rui Chen and Lianyang Zhang and Muniram Budhu",
year = "2013",
doi = "10.1061/(ASCE)GT.1943-5606.0000902",
language = "English (US)",
volume = "139",
pages = "1802--1807",
journal = "Journal of Geotechnical and Geoenvironmental Engineering - ASCE",
issn = "1090-0241",
publisher = "American Society of Civil Engineers (ASCE)",
number = "10",

}

TY - JOUR

T1 - Biopolymer stabilization of mine tailings

AU - Chen, Rui

AU - Zhang, Lianyang

AU - Budhu, Muniram

PY - 2013

Y1 - 2013

N2 - A feasibility study was performed on using xanthan gum and guar gum, two biopolymers that are naturally occurring and inexpensive, to stabilize mine tailings (MT). The simple fall cone method was adopted to evaluate the liquid limit and undrained shear strength of sundried MT mixed with xanthan gum or guar gum solutions at different concentrations. Environmental scanning electron microscopy (ESEM) imaging was also conducted to study the microstructure of the biopolymer-MT system. The results indicate that the inclusion of xanthan gum or guar gum increases both the liquid limit and the undrained shear strength of the MT, higher biopolymer concentrations leading to greater increases. The increase of the liquid limit and undrained shear strength of the MT mixed with a biopolymer solution is mainly attributable to the high viscosity of the biopolymer pore fluid and the bonding between the biopolymer and the MT particles. Guar gum is more effective than xanthan gum in increasing the liquid limit and undrained shear strength of the MT, because the guar gum solution is more viscous than the xanthangumsolution at the same concentration, the guargum-MTparticle bonding is stronger than the xanthan gum-MTparticle bonding, and guar gum causes a lower degree of aggregation of MT particles than xanthan gum. By comparing the undrained shear strength data with empirical equations in the literature, two new equations were proposed for predicting the undrained shear strength of the MT mixed with a biopolymer for water contents near the liquid limit, based on the liquid limit and water content, and the liquidity index, respectively.

AB - A feasibility study was performed on using xanthan gum and guar gum, two biopolymers that are naturally occurring and inexpensive, to stabilize mine tailings (MT). The simple fall cone method was adopted to evaluate the liquid limit and undrained shear strength of sundried MT mixed with xanthan gum or guar gum solutions at different concentrations. Environmental scanning electron microscopy (ESEM) imaging was also conducted to study the microstructure of the biopolymer-MT system. The results indicate that the inclusion of xanthan gum or guar gum increases both the liquid limit and the undrained shear strength of the MT, higher biopolymer concentrations leading to greater increases. The increase of the liquid limit and undrained shear strength of the MT mixed with a biopolymer solution is mainly attributable to the high viscosity of the biopolymer pore fluid and the bonding between the biopolymer and the MT particles. Guar gum is more effective than xanthan gum in increasing the liquid limit and undrained shear strength of the MT, because the guar gum solution is more viscous than the xanthangumsolution at the same concentration, the guargum-MTparticle bonding is stronger than the xanthan gum-MTparticle bonding, and guar gum causes a lower degree of aggregation of MT particles than xanthan gum. By comparing the undrained shear strength data with empirical equations in the literature, two new equations were proposed for predicting the undrained shear strength of the MT mixed with a biopolymer for water contents near the liquid limit, based on the liquid limit and water content, and the liquidity index, respectively.

KW - Biopolymer

KW - Environmental scanning electron microscopy

KW - Fall cone method

KW - Guar gum

KW - Liquid limit

KW - Mine tailings

KW - Undrained shear strength

KW - Xanthan gum

UR - http://www.scopus.com/inward/record.url?scp=84884327916&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84884327916&partnerID=8YFLogxK

U2 - 10.1061/(ASCE)GT.1943-5606.0000902

DO - 10.1061/(ASCE)GT.1943-5606.0000902

M3 - Article

AN - SCOPUS:84884327916

VL - 139

SP - 1802

EP - 1807

JO - Journal of Geotechnical and Geoenvironmental Engineering - ASCE

JF - Journal of Geotechnical and Geoenvironmental Engineering - ASCE

SN - 1090-0241

IS - 10

ER -