Biopolymer stabilization of mine tailings for dust control

Rui Chen, Ilsu Lee, Lianyang Zhang

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

Mine tailings, or mill tailings (MTs), are highly susceptible to wind erosion (dust) and have brought about different environmental and safety concerns. Many efforts have been attempted to stabilize MTs for dust control, but all have drawbacks. The current study investigates the feasibility of using two natural and renewable biopolymers, xanthan gum and guar gum, to stabilize MTs for dust control. Moisture retention and wind tunnel tests were performed to evaluate, respectively, the enhancement of water retention capacity and the improvement of resistance to wind dispersal after MTs were treated with biopolymer solutions of different concentrations. Because the resistance to the formation of dust is closely related to how easy the particles can be detached from the surface, a flat-ended cylindrical penetrometer was manufactured and used to evaluate the surface strength (maximum penetration force) of dry MT specimens treated with biopolymer solutions of different concentrations. Scanning electron microscopy imaging was also performed to investigate the evolvement of the microstructure of MTs after biopolymer treatment. The results indicate that both xanthan gum and guar gum are effective in enhancing the moisture retention capacity, improving the dust resistance, and increasing the surface strength of MTs beyond that of water wetting. This is mainly because the biopolymers form coatings on MT particles and create bonding between them. The results also demonstrate that the flat-ended cylindrical penetrometer is a promising technique for characterizing the dust resistance of MTs.

Original languageEnglish (US)
Article number04014100
JournalJournal of Geotechnical and Geoenvironmental Engineering
Volume141
Issue number2
DOIs
StatePublished - Feb 1 2015

Fingerprint

Dust control
Biopolymers
Tailings
tailings
stabilization
Stabilization
mill
dust
Dust
Xanthan gum
penetrometer
Moisture
moisture
wind erosion
water retention
wind tunnel
wetting
Particles (particulate matter)
Wind tunnels
Wetting

Keywords

  • Biopolymer
  • Dust control
  • Mine tailings (MTs)
  • Scanning electron microscopy (SEM)
  • Surface strength
  • Wind tunnel test

ASJC Scopus subject areas

  • Environmental Science(all)
  • Geotechnical Engineering and Engineering Geology

Cite this

Biopolymer stabilization of mine tailings for dust control. / Chen, Rui; Lee, Ilsu; Zhang, Lianyang.

In: Journal of Geotechnical and Geoenvironmental Engineering, Vol. 141, No. 2, 04014100, 01.02.2015.

Research output: Contribution to journalArticle

@article{92f4a10914ab45e1889143d13ad90b64,
title = "Biopolymer stabilization of mine tailings for dust control",
abstract = "Mine tailings, or mill tailings (MTs), are highly susceptible to wind erosion (dust) and have brought about different environmental and safety concerns. Many efforts have been attempted to stabilize MTs for dust control, but all have drawbacks. The current study investigates the feasibility of using two natural and renewable biopolymers, xanthan gum and guar gum, to stabilize MTs for dust control. Moisture retention and wind tunnel tests were performed to evaluate, respectively, the enhancement of water retention capacity and the improvement of resistance to wind dispersal after MTs were treated with biopolymer solutions of different concentrations. Because the resistance to the formation of dust is closely related to how easy the particles can be detached from the surface, a flat-ended cylindrical penetrometer was manufactured and used to evaluate the surface strength (maximum penetration force) of dry MT specimens treated with biopolymer solutions of different concentrations. Scanning electron microscopy imaging was also performed to investigate the evolvement of the microstructure of MTs after biopolymer treatment. The results indicate that both xanthan gum and guar gum are effective in enhancing the moisture retention capacity, improving the dust resistance, and increasing the surface strength of MTs beyond that of water wetting. This is mainly because the biopolymers form coatings on MT particles and create bonding between them. The results also demonstrate that the flat-ended cylindrical penetrometer is a promising technique for characterizing the dust resistance of MTs.",
keywords = "Biopolymer, Dust control, Mine tailings (MTs), Scanning electron microscopy (SEM), Surface strength, Wind tunnel test",
author = "Rui Chen and Ilsu Lee and Lianyang Zhang",
year = "2015",
month = "2",
day = "1",
doi = "10.1061/(ASCE)GT.1943-5606.0001240",
language = "English (US)",
volume = "141",
journal = "Journal of Geotechnical and Geoenvironmental Engineering - ASCE",
issn = "1090-0241",
publisher = "American Society of Civil Engineers (ASCE)",
number = "2",

}

TY - JOUR

T1 - Biopolymer stabilization of mine tailings for dust control

AU - Chen, Rui

AU - Lee, Ilsu

AU - Zhang, Lianyang

PY - 2015/2/1

Y1 - 2015/2/1

N2 - Mine tailings, or mill tailings (MTs), are highly susceptible to wind erosion (dust) and have brought about different environmental and safety concerns. Many efforts have been attempted to stabilize MTs for dust control, but all have drawbacks. The current study investigates the feasibility of using two natural and renewable biopolymers, xanthan gum and guar gum, to stabilize MTs for dust control. Moisture retention and wind tunnel tests were performed to evaluate, respectively, the enhancement of water retention capacity and the improvement of resistance to wind dispersal after MTs were treated with biopolymer solutions of different concentrations. Because the resistance to the formation of dust is closely related to how easy the particles can be detached from the surface, a flat-ended cylindrical penetrometer was manufactured and used to evaluate the surface strength (maximum penetration force) of dry MT specimens treated with biopolymer solutions of different concentrations. Scanning electron microscopy imaging was also performed to investigate the evolvement of the microstructure of MTs after biopolymer treatment. The results indicate that both xanthan gum and guar gum are effective in enhancing the moisture retention capacity, improving the dust resistance, and increasing the surface strength of MTs beyond that of water wetting. This is mainly because the biopolymers form coatings on MT particles and create bonding between them. The results also demonstrate that the flat-ended cylindrical penetrometer is a promising technique for characterizing the dust resistance of MTs.

AB - Mine tailings, or mill tailings (MTs), are highly susceptible to wind erosion (dust) and have brought about different environmental and safety concerns. Many efforts have been attempted to stabilize MTs for dust control, but all have drawbacks. The current study investigates the feasibility of using two natural and renewable biopolymers, xanthan gum and guar gum, to stabilize MTs for dust control. Moisture retention and wind tunnel tests were performed to evaluate, respectively, the enhancement of water retention capacity and the improvement of resistance to wind dispersal after MTs were treated with biopolymer solutions of different concentrations. Because the resistance to the formation of dust is closely related to how easy the particles can be detached from the surface, a flat-ended cylindrical penetrometer was manufactured and used to evaluate the surface strength (maximum penetration force) of dry MT specimens treated with biopolymer solutions of different concentrations. Scanning electron microscopy imaging was also performed to investigate the evolvement of the microstructure of MTs after biopolymer treatment. The results indicate that both xanthan gum and guar gum are effective in enhancing the moisture retention capacity, improving the dust resistance, and increasing the surface strength of MTs beyond that of water wetting. This is mainly because the biopolymers form coatings on MT particles and create bonding between them. The results also demonstrate that the flat-ended cylindrical penetrometer is a promising technique for characterizing the dust resistance of MTs.

KW - Biopolymer

KW - Dust control

KW - Mine tailings (MTs)

KW - Scanning electron microscopy (SEM)

KW - Surface strength

KW - Wind tunnel test

UR - http://www.scopus.com/inward/record.url?scp=84921362577&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921362577&partnerID=8YFLogxK

U2 - 10.1061/(ASCE)GT.1943-5606.0001240

DO - 10.1061/(ASCE)GT.1943-5606.0001240

M3 - Article

AN - SCOPUS:84921362577

VL - 141

JO - Journal of Geotechnical and Geoenvironmental Engineering - ASCE

JF - Journal of Geotechnical and Geoenvironmental Engineering - ASCE

SN - 1090-0241

IS - 2

M1 - 04014100

ER -