Bone bonding strength of calcium phosphate ceramic coated strain gauges

G. Aaron Battraw, John A. Szivek, Philip L. Anderson

Research output: Contribution to journalArticlepeer-review

11 Scopus citations

Abstract

Although strain transfer from bone to gauge has been used as an indication of the extent of bone bonding to calcium phosphate ceramic (CPC) coated strain gauges, interface strength measurements have not been reported. In order to develop bone-bonded gauges that remain attached to bone surfaces for long periods, the strength of the CPC-bone interface must be optimized. A shear test to assess the interface strength of the CPC-bone interface was developed using the femora of 120-day-old male rats. The mean interface strength of a blended CPC coating bonded to the femora of the rats for 6 weeks in vivo was 4.8 ± 2.4 MPa, and one specimen achieved a strength of nearly 10 MPa. This mean strength value is higher then the CPC-gauge interface strength reported in early studies, but it is lower than recently developed heat treated CPC-gauge interfaces that have average strengths of approximately 7.0 ± 2.0 MPa.

Original languageEnglish (US)
Pages (from-to)32-35
Number of pages4
JournalJournal of Biomedical Materials Research
Volume48
Issue number1
DOIs
StatePublished - Mar 1999

Keywords

  • Bone bonding
  • Calcium phosphate ceramic
  • Rats
  • Shear strength
  • Strain gauge

ASJC Scopus subject areas

  • Biomaterials
  • Biomedical Engineering

Fingerprint Dive into the research topics of 'Bone bonding strength of calcium phosphate ceramic coated strain gauges'. Together they form a unique fingerprint.

Cite this