CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels

Hong Liu, Peiwen Li, Jon Van Lew

Research output: Contribution to journalArticle

79 Citations (Scopus)

Abstract

This work studied the issues of uniform flow distribution for general application in fuel cells, fuel processing chemical reactors, and other industrial devices. A novel method for uniform flow distribution was proposed, in which multiple levels of flow channel bifurcations were considered to uniformly distribute a flow into 2n flow channels at the final stage, after n levels of bifurcation. To study the effect of the flow channel bifurcation structure and dimensions on the flow distribution uniformity, numerical analysis was conducted. Parameters such as the flow channel length and width at each level of bifurcation as well as the curvature of the turning area of flow channels were particularly investigated. Important results concerning the geometrical design of flow distributors for better flow distribution and uniformity are presented. The best structure of a flow distributor was selected based on the criterion of flow distribution uniformity and low pressure loss. Since the studied novel flow distributor distributes a flow into a number of parallel channels in a remarkable uniformity, the flow distribution structure is expected to be widely used in fuel cells, fuel cell systems, and variety of industrial reactors and heat exchangers to significantly improve the performance of these devices. The studied flow regime is limited to laminar flow. A CFD tool FLUENTat the was used for the simulation. The numerical treatment of convection terms in governing equations was based on the QUICK scheme, and the coupled computation solving for pressure and velocity fields was based on the SIMPLE algorithm.

Original languageEnglish (US)
Pages (from-to)9186-9198
Number of pages13
JournalInternational Journal of Hydrogen Energy
Volume35
Issue number17
DOIs
StatePublished - Sep 2010

Fingerprint

distributors
channel flow
Channel flow
charge flow devices
flow distribution
Computational fluid dynamics
Fuel cells
fuel cells
uniform flow
Chemical reactors
chemical reactors
exchangers
Laminar flow
Heat exchangers
Numerical analysis
heat exchangers
laminar flow
pressure distribution
numerical analysis
convection

Keywords

  • CFD analysis
  • Flow distributor
  • Flow uniformity
  • Fuel cells
  • Reactors

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Condensed Matter Physics
  • Energy Engineering and Power Technology

Cite this

CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels. / Liu, Hong; Li, Peiwen; Lew, Jon Van.

In: International Journal of Hydrogen Energy, Vol. 35, No. 17, 09.2010, p. 9186-9198.

Research output: Contribution to journalArticle

@article{7d7ad2c6a66546afa838c8c2a3f29540,
title = "CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels",
abstract = "This work studied the issues of uniform flow distribution for general application in fuel cells, fuel processing chemical reactors, and other industrial devices. A novel method for uniform flow distribution was proposed, in which multiple levels of flow channel bifurcations were considered to uniformly distribute a flow into 2n flow channels at the final stage, after n levels of bifurcation. To study the effect of the flow channel bifurcation structure and dimensions on the flow distribution uniformity, numerical analysis was conducted. Parameters such as the flow channel length and width at each level of bifurcation as well as the curvature of the turning area of flow channels were particularly investigated. Important results concerning the geometrical design of flow distributors for better flow distribution and uniformity are presented. The best structure of a flow distributor was selected based on the criterion of flow distribution uniformity and low pressure loss. Since the studied novel flow distributor distributes a flow into a number of parallel channels in a remarkable uniformity, the flow distribution structure is expected to be widely used in fuel cells, fuel cell systems, and variety of industrial reactors and heat exchangers to significantly improve the performance of these devices. The studied flow regime is limited to laminar flow. A CFD tool FLUENTat the was used for the simulation. The numerical treatment of convection terms in governing equations was based on the QUICK scheme, and the coupled computation solving for pressure and velocity fields was based on the SIMPLE algorithm.",
keywords = "CFD analysis, Flow distributor, Flow uniformity, Fuel cells, Reactors",
author = "Hong Liu and Peiwen Li and Lew, {Jon Van}",
year = "2010",
month = "9",
doi = "10.1016/j.ijhydene.2010.06.043",
language = "English (US)",
volume = "35",
pages = "9186--9198",
journal = "International Journal of Hydrogen Energy",
issn = "0360-3199",
publisher = "Elsevier Limited",
number = "17",

}

TY - JOUR

T1 - CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels

AU - Liu, Hong

AU - Li, Peiwen

AU - Lew, Jon Van

PY - 2010/9

Y1 - 2010/9

N2 - This work studied the issues of uniform flow distribution for general application in fuel cells, fuel processing chemical reactors, and other industrial devices. A novel method for uniform flow distribution was proposed, in which multiple levels of flow channel bifurcations were considered to uniformly distribute a flow into 2n flow channels at the final stage, after n levels of bifurcation. To study the effect of the flow channel bifurcation structure and dimensions on the flow distribution uniformity, numerical analysis was conducted. Parameters such as the flow channel length and width at each level of bifurcation as well as the curvature of the turning area of flow channels were particularly investigated. Important results concerning the geometrical design of flow distributors for better flow distribution and uniformity are presented. The best structure of a flow distributor was selected based on the criterion of flow distribution uniformity and low pressure loss. Since the studied novel flow distributor distributes a flow into a number of parallel channels in a remarkable uniformity, the flow distribution structure is expected to be widely used in fuel cells, fuel cell systems, and variety of industrial reactors and heat exchangers to significantly improve the performance of these devices. The studied flow regime is limited to laminar flow. A CFD tool FLUENTat the was used for the simulation. The numerical treatment of convection terms in governing equations was based on the QUICK scheme, and the coupled computation solving for pressure and velocity fields was based on the SIMPLE algorithm.

AB - This work studied the issues of uniform flow distribution for general application in fuel cells, fuel processing chemical reactors, and other industrial devices. A novel method for uniform flow distribution was proposed, in which multiple levels of flow channel bifurcations were considered to uniformly distribute a flow into 2n flow channels at the final stage, after n levels of bifurcation. To study the effect of the flow channel bifurcation structure and dimensions on the flow distribution uniformity, numerical analysis was conducted. Parameters such as the flow channel length and width at each level of bifurcation as well as the curvature of the turning area of flow channels were particularly investigated. Important results concerning the geometrical design of flow distributors for better flow distribution and uniformity are presented. The best structure of a flow distributor was selected based on the criterion of flow distribution uniformity and low pressure loss. Since the studied novel flow distributor distributes a flow into a number of parallel channels in a remarkable uniformity, the flow distribution structure is expected to be widely used in fuel cells, fuel cell systems, and variety of industrial reactors and heat exchangers to significantly improve the performance of these devices. The studied flow regime is limited to laminar flow. A CFD tool FLUENTat the was used for the simulation. The numerical treatment of convection terms in governing equations was based on the QUICK scheme, and the coupled computation solving for pressure and velocity fields was based on the SIMPLE algorithm.

KW - CFD analysis

KW - Flow distributor

KW - Flow uniformity

KW - Fuel cells

KW - Reactors

UR - http://www.scopus.com/inward/record.url?scp=77956389822&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77956389822&partnerID=8YFLogxK

U2 - 10.1016/j.ijhydene.2010.06.043

DO - 10.1016/j.ijhydene.2010.06.043

M3 - Article

AN - SCOPUS:77956389822

VL - 35

SP - 9186

EP - 9198

JO - International Journal of Hydrogen Energy

JF - International Journal of Hydrogen Energy

SN - 0360-3199

IS - 17

ER -