Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements

E. Caraballo, T. Sullivan, R. You, Jesse C Little

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This work focuses on the analysis of baseline and controlled flow over a NACA 0015 airfoil. The stochastic estimation (SE) method is used to correlate the velocity fields from particle image velocimetry (PIV) with surface pressure and hot film measurements taken simultaneously at several locations on the airfoil surface. Data for the airfoil is available at several angles of attack for the unforced flow as well as for forcing at St=2.75 (1250 Hz), but only 20o is examined here. The analysis focuses on the effect of the type of sensor (pressure, hot film or combination of both) as well as the use of multiple times on the estimation. The SE is also used with the proper orthogonal decomposition (POD) method to estimate the time evolution of the modal amplitude. Results show that a combination of pressure and hot film sensors at a few locations can sometimes recover the flow characteristics better than using the individual sensor types alone. Also, including additional time information helps to improve the estimation, with a nearly identical match after 7 times are used. However, including more times increases the calculation time. The reconstruction based on the POD modal amplitude shows good agreement with the flow. Finally, the time evolution of the flow is analyzed showing reasonable agreement in terms of the magnitude of the velocity, but more work is needed before the flow dynamics can be described with confidence.

Original languageEnglish (US)
Title of host publication52nd Aerospace Sciences Meeting
PublisherAmerican Institute of Aeronautics and Astronautics Inc.
ISBN (Print)9781624102561
StatePublished - 2014
Event52nd Aerospace Sciences Meeting 2014 - National Harbor, United States
Duration: Jan 13 2014Jan 17 2014

Other

Other52nd Aerospace Sciences Meeting 2014
CountryUnited States
CityNational Harbor
Period1/13/141/17/14

Fingerprint

Airfoils
Flow fields
Decomposition
Sensors
Pressure sensors
Angle of attack
Velocity measurement

ASJC Scopus subject areas

  • Aerospace Engineering

Cite this

Caraballo, E., Sullivan, T., You, R., & Little, J. C. (2014). Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements. In 52nd Aerospace Sciences Meeting American Institute of Aeronautics and Astronautics Inc..

Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements. / Caraballo, E.; Sullivan, T.; You, R.; Little, Jesse C.

52nd Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., 2014.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Caraballo, E, Sullivan, T, You, R & Little, JC 2014, Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements. in 52nd Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., 52nd Aerospace Sciences Meeting 2014, National Harbor, United States, 1/13/14.
Caraballo E, Sullivan T, You R, Little JC. Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements. In 52nd Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc. 2014
Caraballo, E. ; Sullivan, T. ; You, R. ; Little, Jesse C. / Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements. 52nd Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., 2014.
@inproceedings{48aa980cb31f4deabc9d2ea596a241e9,
title = "Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements",
abstract = "This work focuses on the analysis of baseline and controlled flow over a NACA 0015 airfoil. The stochastic estimation (SE) method is used to correlate the velocity fields from particle image velocimetry (PIV) with surface pressure and hot film measurements taken simultaneously at several locations on the airfoil surface. Data for the airfoil is available at several angles of attack for the unforced flow as well as for forcing at St=2.75 (1250 Hz), but only 20o is examined here. The analysis focuses on the effect of the type of sensor (pressure, hot film or combination of both) as well as the use of multiple times on the estimation. The SE is also used with the proper orthogonal decomposition (POD) method to estimate the time evolution of the modal amplitude. Results show that a combination of pressure and hot film sensors at a few locations can sometimes recover the flow characteristics better than using the individual sensor types alone. Also, including additional time information helps to improve the estimation, with a nearly identical match after 7 times are used. However, including more times increases the calculation time. The reconstruction based on the POD modal amplitude shows good agreement with the flow. Finally, the time evolution of the flow is analyzed showing reasonable agreement in terms of the magnitude of the velocity, but more work is needed before the flow dynamics can be described with confidence.",
author = "E. Caraballo and T. Sullivan and R. You and Little, {Jesse C}",
year = "2014",
language = "English (US)",
isbn = "9781624102561",
booktitle = "52nd Aerospace Sciences Meeting",
publisher = "American Institute of Aeronautics and Astronautics Inc.",

}

TY - GEN

T1 - Characterization of the flow field over a NACA 0015 airfoil using stochastic estimation based on surface pressure and hot film measurements

AU - Caraballo, E.

AU - Sullivan, T.

AU - You, R.

AU - Little, Jesse C

PY - 2014

Y1 - 2014

N2 - This work focuses on the analysis of baseline and controlled flow over a NACA 0015 airfoil. The stochastic estimation (SE) method is used to correlate the velocity fields from particle image velocimetry (PIV) with surface pressure and hot film measurements taken simultaneously at several locations on the airfoil surface. Data for the airfoil is available at several angles of attack for the unforced flow as well as for forcing at St=2.75 (1250 Hz), but only 20o is examined here. The analysis focuses on the effect of the type of sensor (pressure, hot film or combination of both) as well as the use of multiple times on the estimation. The SE is also used with the proper orthogonal decomposition (POD) method to estimate the time evolution of the modal amplitude. Results show that a combination of pressure and hot film sensors at a few locations can sometimes recover the flow characteristics better than using the individual sensor types alone. Also, including additional time information helps to improve the estimation, with a nearly identical match after 7 times are used. However, including more times increases the calculation time. The reconstruction based on the POD modal amplitude shows good agreement with the flow. Finally, the time evolution of the flow is analyzed showing reasonable agreement in terms of the magnitude of the velocity, but more work is needed before the flow dynamics can be described with confidence.

AB - This work focuses on the analysis of baseline and controlled flow over a NACA 0015 airfoil. The stochastic estimation (SE) method is used to correlate the velocity fields from particle image velocimetry (PIV) with surface pressure and hot film measurements taken simultaneously at several locations on the airfoil surface. Data for the airfoil is available at several angles of attack for the unforced flow as well as for forcing at St=2.75 (1250 Hz), but only 20o is examined here. The analysis focuses on the effect of the type of sensor (pressure, hot film or combination of both) as well as the use of multiple times on the estimation. The SE is also used with the proper orthogonal decomposition (POD) method to estimate the time evolution of the modal amplitude. Results show that a combination of pressure and hot film sensors at a few locations can sometimes recover the flow characteristics better than using the individual sensor types alone. Also, including additional time information helps to improve the estimation, with a nearly identical match after 7 times are used. However, including more times increases the calculation time. The reconstruction based on the POD modal amplitude shows good agreement with the flow. Finally, the time evolution of the flow is analyzed showing reasonable agreement in terms of the magnitude of the velocity, but more work is needed before the flow dynamics can be described with confidence.

UR - http://www.scopus.com/inward/record.url?scp=84938323776&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84938323776&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84938323776

SN - 9781624102561

BT - 52nd Aerospace Sciences Meeting

PB - American Institute of Aeronautics and Astronautics Inc.

ER -