Demonstration of a robust curved carbon fiber reinforced polymer deformable mirror with low surface error

Blake Coughenour, S. Mark Amnions, Michael Hart, Robert Romeo, Robert Martin, Matt Rademacher, Hop Bailey

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Abstract

Carbon fiber reinforced polymer (CFRP) composites provide several advantages as a substrate for thin-shell adaptive secondary mirrors, including high stiffness-to-weight ratio and low coefficient of thermal expansion (CTE). We have addressed some of these concerns using a prototype CFRP mirror under actuation. Using 4D and Newton interferometry, we present measurements of surface quality at a range of temperatures. Under actuator relaxation at room temperature, its surface error is low (92 nm RMS) and dominated by edge curvature. This error is reduced further under best actuator correction to 43 nm RMS, placing it into consideration for use in near-IR astronomy. The low surface error internal to the outer ring of actuators - 17 nm RMS at 600F and 33 nm RMS at 200F - suggests that larger mirrors will have a similar figure quality under actuator correction on ground-based AO systems. Furthermore, the actuator forces required to correct the figure are small compared to the dynamic range of voice coil actuators (~0.1 N). In addition, surface roughness is characterized to address the effects of high spatial frequency errors.

Original languageEnglish (US)
Title of host publicationAdaptive Optics Systems II
EditionPART 1
DOIs
StatePublished - Oct 18 2010
EventAdaptive Optics Systems II - San Diego, CA, United States
Duration: Jun 27 2010Jul 2 2010

Publication series

NameProceedings of SPIE - The International Society for Optical Engineering
NumberPART 1
Volume7736
ISSN (Print)0277-786X

Other

OtherAdaptive Optics Systems II
CountryUnited States
CitySan Diego, CA
Period6/27/107/2/10

Keywords

  • Adaptive optics
  • Carbon fiber
  • Deformable
  • Reinforced polymer
  • Secondary mirrors
  • Substrate
  • Thin-shell

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Demonstration of a robust curved carbon fiber reinforced polymer deformable mirror with low surface error'. Together they form a unique fingerprint.

  • Cite this

    Coughenour, B., Amnions, S. M., Hart, M., Romeo, R., Martin, R., Rademacher, M., & Bailey, H. (2010). Demonstration of a robust curved carbon fiber reinforced polymer deformable mirror with low surface error. In Adaptive Optics Systems II (PART 1 ed.). [77363I] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 7736, No. PART 1). https://doi.org/10.1117/12.856326