Design, fabrication, and alignment of the supercam telescope relay optics

M. Borden, D. Golish, Drouet C. D'Aubigny, C. Groppi, J. Kloosterman, T. Cottam, X. Xu, D. Lesser, S. Silva, C. Kulesa, Christopher K Walker, B. Cuerden

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

SuperCam is a 64 pixel, λ=870 μm, superheterodyne camera designed to work with the 10m diameter Heinrich Hertz Telescope on Mount Graham, Arizona. Large imaging arrays were not anticipated when the telescope was originally designed. As a result, complex relay optics are required to adequately re-image the telescope focus on the detector array. After a brief review of SuperCam's optical and environmental requirements, we present the approach selected, along with novel modeling methods used to validate the design. The optical tolerances which drove the opto-mechanical design are presented. New metrology and optical alignment methods developed for SuperCam, but equally applicable to other THz optical systems, are also discussed.

Original languageEnglish (US)
Title of host publication22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011
PublisherInternational Symposium on Space Terahertz Technology
Pages65-68
Number of pages4
StatePublished - 2011
Event22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011 - Tucson, AZ, United States
Duration: Apr 25 2011Apr 28 2011

Other

Other22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011
CountryUnited States
CityTucson, AZ
Period4/25/114/28/11

Fingerprint

relay
Telescopes
Optics
alignment
telescopes
optics
Fabrication
fabrication
pixel
tolerance
Optical systems
metrology
Pixels
Cameras
pixels
cameras
modeling
Detectors
Imaging techniques
requirements

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Space and Planetary Science
  • Electrical and Electronic Engineering
  • Atomic and Molecular Physics, and Optics
  • Radiation

Cite this

Borden, M., Golish, D., D'Aubigny, D. C., Groppi, C., Kloosterman, J., Cottam, T., ... Cuerden, B. (2011). Design, fabrication, and alignment of the supercam telescope relay optics. In 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011 (pp. 65-68). International Symposium on Space Terahertz Technology.

Design, fabrication, and alignment of the supercam telescope relay optics. / Borden, M.; Golish, D.; D'Aubigny, Drouet C.; Groppi, C.; Kloosterman, J.; Cottam, T.; Xu, X.; Lesser, D.; Silva, S.; Kulesa, C.; Walker, Christopher K; Cuerden, B.

22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology, 2011. p. 65-68.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Borden, M, Golish, D, D'Aubigny, DC, Groppi, C, Kloosterman, J, Cottam, T, Xu, X, Lesser, D, Silva, S, Kulesa, C, Walker, CK & Cuerden, B 2011, Design, fabrication, and alignment of the supercam telescope relay optics. in 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology, pp. 65-68, 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011, Tucson, AZ, United States, 4/25/11.
Borden M, Golish D, D'Aubigny DC, Groppi C, Kloosterman J, Cottam T et al. Design, fabrication, and alignment of the supercam telescope relay optics. In 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology. 2011. p. 65-68
Borden, M. ; Golish, D. ; D'Aubigny, Drouet C. ; Groppi, C. ; Kloosterman, J. ; Cottam, T. ; Xu, X. ; Lesser, D. ; Silva, S. ; Kulesa, C. ; Walker, Christopher K ; Cuerden, B. / Design, fabrication, and alignment of the supercam telescope relay optics. 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology, 2011. pp. 65-68
@inproceedings{d93dfdad469a4804af63aa20b13c3bb5,
title = "Design, fabrication, and alignment of the supercam telescope relay optics",
abstract = "SuperCam is a 64 pixel, λ=870 μm, superheterodyne camera designed to work with the 10m diameter Heinrich Hertz Telescope on Mount Graham, Arizona. Large imaging arrays were not anticipated when the telescope was originally designed. As a result, complex relay optics are required to adequately re-image the telescope focus on the detector array. After a brief review of SuperCam's optical and environmental requirements, we present the approach selected, along with novel modeling methods used to validate the design. The optical tolerances which drove the opto-mechanical design are presented. New metrology and optical alignment methods developed for SuperCam, but equally applicable to other THz optical systems, are also discussed.",
author = "M. Borden and D. Golish and D'Aubigny, {Drouet C.} and C. Groppi and J. Kloosterman and T. Cottam and X. Xu and D. Lesser and S. Silva and C. Kulesa and Walker, {Christopher K} and B. Cuerden",
year = "2011",
language = "English (US)",
pages = "65--68",
booktitle = "22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011",
publisher = "International Symposium on Space Terahertz Technology",

}

TY - GEN

T1 - Design, fabrication, and alignment of the supercam telescope relay optics

AU - Borden, M.

AU - Golish, D.

AU - D'Aubigny, Drouet C.

AU - Groppi, C.

AU - Kloosterman, J.

AU - Cottam, T.

AU - Xu, X.

AU - Lesser, D.

AU - Silva, S.

AU - Kulesa, C.

AU - Walker, Christopher K

AU - Cuerden, B.

PY - 2011

Y1 - 2011

N2 - SuperCam is a 64 pixel, λ=870 μm, superheterodyne camera designed to work with the 10m diameter Heinrich Hertz Telescope on Mount Graham, Arizona. Large imaging arrays were not anticipated when the telescope was originally designed. As a result, complex relay optics are required to adequately re-image the telescope focus on the detector array. After a brief review of SuperCam's optical and environmental requirements, we present the approach selected, along with novel modeling methods used to validate the design. The optical tolerances which drove the opto-mechanical design are presented. New metrology and optical alignment methods developed for SuperCam, but equally applicable to other THz optical systems, are also discussed.

AB - SuperCam is a 64 pixel, λ=870 μm, superheterodyne camera designed to work with the 10m diameter Heinrich Hertz Telescope on Mount Graham, Arizona. Large imaging arrays were not anticipated when the telescope was originally designed. As a result, complex relay optics are required to adequately re-image the telescope focus on the detector array. After a brief review of SuperCam's optical and environmental requirements, we present the approach selected, along with novel modeling methods used to validate the design. The optical tolerances which drove the opto-mechanical design are presented. New metrology and optical alignment methods developed for SuperCam, but equally applicable to other THz optical systems, are also discussed.

UR - http://www.scopus.com/inward/record.url?scp=84897000936&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84897000936&partnerID=8YFLogxK

M3 - Conference contribution

SP - 65

EP - 68

BT - 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011

PB - International Symposium on Space Terahertz Technology

ER -