Direct measurement of subsurface mass change using the variable baseline gravity gradient method

Jeffrey Kennedy, Ty P.A. Ferré, Andreas Güntner, Maiko Abe, Benjamin Creutzfeldt

Research output: Contribution to journalArticle

25 Scopus citations

Abstract

Time-lapse gravity data provide a direct, nondestructive method to monitor mass changes at scales from centimeter to kilometer. But, the effectively infinite spatial sensitivity of gravity measurements can make it difficult to isolate the signal of interest. The variable baseline gravity gradient method, based on the difference of measurements between two gravimeters, is an alternative to the conventional approach of individually modeling all sources of mass and elevation changes. This approach can improve the signal-to-noise ratio for many applications by removing the contributions of Earth tides, loading, and other signals that have the same effect on both gravimeters. At the same time, this approach can focus the support volume within a relatively small user-defined region of the subsurface. The method is demonstrated using paired superconducting gravimeters to make for the first time a large-scale, noninvasive measurement of infiltration wetting front velocity and change in water content above the wetting front. Key Points Variable baseline gravity gradients are measured between two or more gravimeters Gradient measurements eliminate ocean and atmospheric loading noise Infiltration rate and change in water content is estimated using gradient data

Original languageEnglish (US)
Pages (from-to)2827-2834
Number of pages8
JournalGeophysical Research Letters
Volume41
Issue number8
DOIs
StatePublished - Apr 28 2014

Keywords

  • continuous gravity
  • hydrogeophysics
  • timelapse-gravity

ASJC Scopus subject areas

  • Geophysics
  • Earth and Planetary Sciences(all)

Fingerprint Dive into the research topics of 'Direct measurement of subsurface mass change using the variable baseline gravity gradient method'. Together they form a unique fingerprint.

  • Cite this