Dynamic Doppler Frequency Shift Errors: Measurement, Characterization, and Compensation

Research output: Contribution to journalArticlepeer-review

9 Scopus citations

Abstract

Positioning calibration under dynamic conditions is becoming increasingly of interest for high precision fields, such as additive manufacturing and semiconductor lithography. Heterodyne interferometry is often used to calibrate a stage's position because interferometry has a high dynamic range and direct traceability to the meter. When using heterodyne interferometry, filtering is routinely performed to process and determine the measured phase change, which is proportional to the displacement from one target location to another. The filtering in the signal processing introduces a phase delay dependent on the detection frequency, which leads to displacement errors when target velocity is non-constant as is the case in dynamic calibrations. This paper presents a phase delay compensation method by measuring instantaneous detection frequency and solving for the corresponding phase delay in a field-programmable gate array (FPGA) in real time. The FPGA hardware-in-the-loop simulation shows that this method can significantly decrease the displacement error from ±100's nm to ±3 nm in dynamic cases and it will still keep subnanometer resolution for quasi-static calibrations.

Original languageEnglish (US)
Article number7008466
Pages (from-to)1994-2004
Number of pages11
JournalIEEE Transactions on Instrumentation and Measurement
Volume64
Issue number7
DOIs
StatePublished - Jul 1 2015
Externally publishedYes

Keywords

  • Displacement measurement
  • dynamic response
  • field-programmable gate arrays (FPGAs)
  • interferometry
  • phase measurement

ASJC Scopus subject areas

  • Instrumentation
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Dynamic Doppler Frequency Shift Errors: Measurement, Characterization, and Compensation'. Together they form a unique fingerprint.

Cite this