Effects of pH on cell growth, lipid production and CO2 addition of microalgae Chlorella sorokiniana

Renhe Qiu, Song Gao, Paola A. Lopez, Kimberly L Ogden

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

Microalgae have emerged as one of the most promising alternative energy feedstocks. Some advantages include the simple cellular structure, short production cycle, high lipid content, and fast growth. However, high production costs due to high CO2 usage and low lipid productivity have been some of the major challenges impeding the commercial production of algal biodiesel. Here, cell growth and lipid content of Chlorella sorokiniana DOE1412 were first evaluated at different pH in flask cultivation. Culture pH was manipulated by CO2 addition. The optimal pH for DOE1412 is approximately 6.0 when only accounting for cell growth and lipid production and not considering the CO2 efficiency. A flat panel airlift photobioreactor (PBR) was used for scale-up cultivation at five different pH levels (6.5, 7, 7.5, 8 and 8.5). Data of pH values and CO2 addition was collected by a data logger. Biomass productivity increased with decreasing pH. By taking into account not only the cell growth and lipid production but also CO2 addition, the lowest value of CO2 addition was achieved at pH 8 (2.01 g CO2/g biomass). The fatty acid profiles and biodiesel properties, such as iodine value (IV), saponification value (SV), cetane number (CN), degree of unsaturation (DU), long-chain saturated factor (LCSF), and cold filter plugging point (CFPP), were determined as a function of pH. CN of biodiesel produced at pH 6.5, 7 and 7.5 satisfied the US standard ASTM D6751; among them, the pH 6.5 products met the European standard EN 14214. Finally, protein content in microalgal biomass increased with increasing pH, while C/N ratio in cells decreased.

Original languageEnglish (US)
Pages (from-to)192-199
Number of pages8
JournalAlgal Research
Volume28
DOIs
StatePublished - Dec 1 2017

Fingerprint

Chlorella sorokiniana
microalgae
cell growth
lipids
biodiesel
biomass
lipid content
saponification
iodine value
cell structures
renewable energy sources
feedstocks
production costs
carbon nitrogen ratio

Keywords

  • Biodiesel
  • Carbon dioxide
  • Chlorella sorokiniana
  • Lipid
  • Microalgae
  • pH

ASJC Scopus subject areas

  • Agronomy and Crop Science

Cite this

Effects of pH on cell growth, lipid production and CO2 addition of microalgae Chlorella sorokiniana. / Qiu, Renhe; Gao, Song; Lopez, Paola A.; Ogden, Kimberly L.

In: Algal Research, Vol. 28, 01.12.2017, p. 192-199.

Research output: Contribution to journalArticle

@article{374ae87ed1634a79a60fef5ddf253823,
title = "Effects of pH on cell growth, lipid production and CO2 addition of microalgae Chlorella sorokiniana",
abstract = "Microalgae have emerged as one of the most promising alternative energy feedstocks. Some advantages include the simple cellular structure, short production cycle, high lipid content, and fast growth. However, high production costs due to high CO2 usage and low lipid productivity have been some of the major challenges impeding the commercial production of algal biodiesel. Here, cell growth and lipid content of Chlorella sorokiniana DOE1412 were first evaluated at different pH in flask cultivation. Culture pH was manipulated by CO2 addition. The optimal pH for DOE1412 is approximately 6.0 when only accounting for cell growth and lipid production and not considering the CO2 efficiency. A flat panel airlift photobioreactor (PBR) was used for scale-up cultivation at five different pH levels (6.5, 7, 7.5, 8 and 8.5). Data of pH values and CO2 addition was collected by a data logger. Biomass productivity increased with decreasing pH. By taking into account not only the cell growth and lipid production but also CO2 addition, the lowest value of CO2 addition was achieved at pH 8 (2.01 g CO2/g biomass). The fatty acid profiles and biodiesel properties, such as iodine value (IV), saponification value (SV), cetane number (CN), degree of unsaturation (DU), long-chain saturated factor (LCSF), and cold filter plugging point (CFPP), were determined as a function of pH. CN of biodiesel produced at pH 6.5, 7 and 7.5 satisfied the US standard ASTM D6751; among them, the pH 6.5 products met the European standard EN 14214. Finally, protein content in microalgal biomass increased with increasing pH, while C/N ratio in cells decreased.",
keywords = "Biodiesel, Carbon dioxide, Chlorella sorokiniana, Lipid, Microalgae, pH",
author = "Renhe Qiu and Song Gao and Lopez, {Paola A.} and Ogden, {Kimberly L}",
year = "2017",
month = "12",
day = "1",
doi = "10.1016/j.algal.2017.11.004",
language = "English (US)",
volume = "28",
pages = "192--199",
journal = "Algal Research",
issn = "2211-9264",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Effects of pH on cell growth, lipid production and CO2 addition of microalgae Chlorella sorokiniana

AU - Qiu, Renhe

AU - Gao, Song

AU - Lopez, Paola A.

AU - Ogden, Kimberly L

PY - 2017/12/1

Y1 - 2017/12/1

N2 - Microalgae have emerged as one of the most promising alternative energy feedstocks. Some advantages include the simple cellular structure, short production cycle, high lipid content, and fast growth. However, high production costs due to high CO2 usage and low lipid productivity have been some of the major challenges impeding the commercial production of algal biodiesel. Here, cell growth and lipid content of Chlorella sorokiniana DOE1412 were first evaluated at different pH in flask cultivation. Culture pH was manipulated by CO2 addition. The optimal pH for DOE1412 is approximately 6.0 when only accounting for cell growth and lipid production and not considering the CO2 efficiency. A flat panel airlift photobioreactor (PBR) was used for scale-up cultivation at five different pH levels (6.5, 7, 7.5, 8 and 8.5). Data of pH values and CO2 addition was collected by a data logger. Biomass productivity increased with decreasing pH. By taking into account not only the cell growth and lipid production but also CO2 addition, the lowest value of CO2 addition was achieved at pH 8 (2.01 g CO2/g biomass). The fatty acid profiles and biodiesel properties, such as iodine value (IV), saponification value (SV), cetane number (CN), degree of unsaturation (DU), long-chain saturated factor (LCSF), and cold filter plugging point (CFPP), were determined as a function of pH. CN of biodiesel produced at pH 6.5, 7 and 7.5 satisfied the US standard ASTM D6751; among them, the pH 6.5 products met the European standard EN 14214. Finally, protein content in microalgal biomass increased with increasing pH, while C/N ratio in cells decreased.

AB - Microalgae have emerged as one of the most promising alternative energy feedstocks. Some advantages include the simple cellular structure, short production cycle, high lipid content, and fast growth. However, high production costs due to high CO2 usage and low lipid productivity have been some of the major challenges impeding the commercial production of algal biodiesel. Here, cell growth and lipid content of Chlorella sorokiniana DOE1412 were first evaluated at different pH in flask cultivation. Culture pH was manipulated by CO2 addition. The optimal pH for DOE1412 is approximately 6.0 when only accounting for cell growth and lipid production and not considering the CO2 efficiency. A flat panel airlift photobioreactor (PBR) was used for scale-up cultivation at five different pH levels (6.5, 7, 7.5, 8 and 8.5). Data of pH values and CO2 addition was collected by a data logger. Biomass productivity increased with decreasing pH. By taking into account not only the cell growth and lipid production but also CO2 addition, the lowest value of CO2 addition was achieved at pH 8 (2.01 g CO2/g biomass). The fatty acid profiles and biodiesel properties, such as iodine value (IV), saponification value (SV), cetane number (CN), degree of unsaturation (DU), long-chain saturated factor (LCSF), and cold filter plugging point (CFPP), were determined as a function of pH. CN of biodiesel produced at pH 6.5, 7 and 7.5 satisfied the US standard ASTM D6751; among them, the pH 6.5 products met the European standard EN 14214. Finally, protein content in microalgal biomass increased with increasing pH, while C/N ratio in cells decreased.

KW - Biodiesel

KW - Carbon dioxide

KW - Chlorella sorokiniana

KW - Lipid

KW - Microalgae

KW - pH

UR - http://www.scopus.com/inward/record.url?scp=85032908863&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85032908863&partnerID=8YFLogxK

U2 - 10.1016/j.algal.2017.11.004

DO - 10.1016/j.algal.2017.11.004

M3 - Article

VL - 28

SP - 192

EP - 199

JO - Algal Research

JF - Algal Research

SN - 2211-9264

ER -