Fabrication of 4-meter class astronomical optics

M. J. Valente, D. W. Kim, C. J. Oh, M. J. Novak, J. H. Burge

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Abstract

The 8-meter mirror production capacity at the University of Arizona is well known. As the Arizona Stadium facility is occupied with giant mirrors, we have developed capability for grinding, polishing, and testing 4-m mirrors in the large optics shop in the College of Optical Sciences. Several outstanding capabilities for optics up to 4.3 meters in diameter are in place: A 4.3-m computer controlled grinding and polishing machine allows efficient figuring of steeply aspheric and nonaxisymmetric surfaces. Interferometry (IR and visible wavelengths) and surface profilometry making novel use of a laser tracker allows quick, accurate in-process measurements from a movable platform on a 30-m vertical tower. A 2-meter class flat measured with a 1-m vibration insensitive Fizeau interferometer and scanning pentaprism system; stitching of 1-m sub-apertures provides complete surface data with the technology ready for extension to the 4 m level. These methods were proven successful by completion of several optics including the 4.3-m Discovery Channel Telescope primary mirror. The 10 cm thick ULE substrate was ground and polished to 16 nm rms accuracy, corresponding to 80% encircled energy in 0.073 arc-second, after removing low order bending modes. The successful completion of the DCT mirror demonstrates the engineering and performance of the support system, ability to finish large aspheric surfaces using computer controlled polishing, and accuracy verification of surface measurements. In addition to the DCT mirror, a 2-meter class flat was produced to an unprecedented accuracy of <10 nm-rms, demonstrating the combined 1-m Fizeau interferometer and scanning pentaprism measurement techniques.

Original languageEnglish (US)
Title of host publicationModern Technologies in Space- and Ground-Based Telescopes and Instrumentation
DOIs
StatePublished - Sep 23 2010
EventModern Technologies in Space- and Ground-Based Telescopes and Instrumentation - San Diego, CA, United States
Duration: Jun 27 2010Jul 2 2010

Publication series

NameProceedings of SPIE - The International Society for Optical Engineering
Volume7739
ISSN (Print)0277-786X

Other

OtherModern Technologies in Space- and Ground-Based Telescopes and Instrumentation
CountryUnited States
CitySan Diego, CA
Period6/27/107/2/10

Keywords

  • Computer control
  • Fabrication
  • Figuring
  • Grinding
  • Large optics
  • Metrology
  • Polishing

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Fabrication of 4-meter class astronomical optics'. Together they form a unique fingerprint.

  • Cite this

    Valente, M. J., Kim, D. W., Oh, C. J., Novak, M. J., & Burge, J. H. (2010). Fabrication of 4-meter class astronomical optics. In Modern Technologies in Space- and Ground-Based Telescopes and Instrumentation [77392D] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 7739). https://doi.org/10.1117/12.861979