Fabrication of microwave patch antenna using additive manufacturing technique

Min Liang, Corey Shemelya, Eric Macdonald, Ryan Wicker, Hao Xin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Abstract

Additive manufacturing (AM), often called 3D printing, has received much attention recently with impressive demonstrations ranging from musical instruments, to vehicles, to housing components or even entire buildings. Although it has been argued that 3D printing could be the future of manufacturing, the potential and applicability of these methods for creating functional electronics at RF / microwave frequency remain largely unexplored.

Original languageEnglish (US)
Title of host publication2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages269
Number of pages1
ISBN (Print)9781479937462
DOIs
StatePublished - Nov 12 2014
Event2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Memphis, United States
Duration: Jul 6 2014Jul 11 2014

Other

Other2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014
CountryUnited States
CityMemphis
Period7/6/147/11/14

Fingerprint

3D printers
Microwave antennas
Microstrip antennas
Printing
Musical instruments
Fabrication
Microwave frequencies
Electronic equipment
Demonstrations

ASJC Scopus subject areas

  • Artificial Intelligence
  • Human-Computer Interaction
  • Electrical and Electronic Engineering

Cite this

Liang, M., Shemelya, C., Macdonald, E., Wicker, R., & Xin, H. (2014). Fabrication of microwave patch antenna using additive manufacturing technique. In 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings (pp. 269). [6955652] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/USNC-URSI.2014.6955652

Fabrication of microwave patch antenna using additive manufacturing technique. / Liang, Min; Shemelya, Corey; Macdonald, Eric; Wicker, Ryan; Xin, Hao.

2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. p. 269 6955652.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liang, M, Shemelya, C, Macdonald, E, Wicker, R & Xin, H 2014, Fabrication of microwave patch antenna using additive manufacturing technique. in 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings., 6955652, Institute of Electrical and Electronics Engineers Inc., pp. 269, 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014, Memphis, United States, 7/6/14. https://doi.org/10.1109/USNC-URSI.2014.6955652
Liang M, Shemelya C, Macdonald E, Wicker R, Xin H. Fabrication of microwave patch antenna using additive manufacturing technique. In 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2014. p. 269. 6955652 https://doi.org/10.1109/USNC-URSI.2014.6955652
Liang, Min ; Shemelya, Corey ; Macdonald, Eric ; Wicker, Ryan ; Xin, Hao. / Fabrication of microwave patch antenna using additive manufacturing technique. 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 269
@inproceedings{488310b575ff4eb6b8e52c272e9343e2,
title = "Fabrication of microwave patch antenna using additive manufacturing technique",
abstract = "Additive manufacturing (AM), often called 3D printing, has received much attention recently with impressive demonstrations ranging from musical instruments, to vehicles, to housing components or even entire buildings. Although it has been argued that 3D printing could be the future of manufacturing, the potential and applicability of these methods for creating functional electronics at RF / microwave frequency remain largely unexplored.",
author = "Min Liang and Corey Shemelya and Eric Macdonald and Ryan Wicker and Hao Xin",
year = "2014",
month = "11",
day = "12",
doi = "10.1109/USNC-URSI.2014.6955652",
language = "English (US)",
isbn = "9781479937462",
pages = "269",
booktitle = "2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Fabrication of microwave patch antenna using additive manufacturing technique

AU - Liang, Min

AU - Shemelya, Corey

AU - Macdonald, Eric

AU - Wicker, Ryan

AU - Xin, Hao

PY - 2014/11/12

Y1 - 2014/11/12

N2 - Additive manufacturing (AM), often called 3D printing, has received much attention recently with impressive demonstrations ranging from musical instruments, to vehicles, to housing components or even entire buildings. Although it has been argued that 3D printing could be the future of manufacturing, the potential and applicability of these methods for creating functional electronics at RF / microwave frequency remain largely unexplored.

AB - Additive manufacturing (AM), often called 3D printing, has received much attention recently with impressive demonstrations ranging from musical instruments, to vehicles, to housing components or even entire buildings. Although it has been argued that 3D printing could be the future of manufacturing, the potential and applicability of these methods for creating functional electronics at RF / microwave frequency remain largely unexplored.

UR - http://www.scopus.com/inward/record.url?scp=84916244834&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84916244834&partnerID=8YFLogxK

U2 - 10.1109/USNC-URSI.2014.6955652

DO - 10.1109/USNC-URSI.2014.6955652

M3 - Conference contribution

AN - SCOPUS:84916244834

SN - 9781479937462

SP - 269

BT - 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -