Handaxe manufacture and re-sharpening throughout the Lower Paleolithic sequence of Tabun Cave

Ron Shimelmitz, Michael Bisson, Mina Weinstein-Evron, Steven L. Kuhn

Research output: Research - peer-reviewArticle

Abstract

In this paper we assess the evidence for on-site manufacture and re-sharpening of handaxes in the Lower Paleolithic layers of Tabun Cave by examining the ratio of thinning flakes, the typical waste of bifacial manufacture, to handaxes. Our study of twenty nine assemblages ranging from the Acheulean to the Acheulo-Yabrudian complex, combining results from Jelinek's and Ronen's excavations, shows that thinning flakes are scarce throughout the entire sequence. Results indicate that handaxes were commonly not manufactured or re-sharpened in the excavated area and that these activities were most likely conducted outside the site. The late Lower Paleolithic in various parts of Eurasia and Africa is characterized by high variability in lithic technology, which in the case of the Levant is best reflected in the Acheulo-Yabrudian complex. This study aids our understanding of variability in the Levantine late Lower Paleolithic by adding the concept of segmentation of reduction as an integral part of late Lower Paleolithic lithic technology. Significantly, in Tabun Cave the segmentation of reduction that characterizes handaxe manufacture differs from the patterns observed in Amudian blade production and Yabrudian scraper manufacture, which were both regularly conducted on site. The extent of variability and flexibility is thus reflected not only in the technologies employed, but also in how different reduction sequences were segmented and executed across the landscape, suggesting a link between technical knowledge, mobility patterns and landscape exploitation.

LanguageEnglish (US)
JournalQuaternary International
DOIs
StateAccepted/In press - 2016

Fingerprint

Paleolithic
cave
segmentation
thinning
excavation
Africa

Keywords

  • Handaxes
  • Lithic technology
  • Lower Paleolithic
  • Segmentation of reduction
  • Tabun Cave

ASJC Scopus subject areas

  • Earth-Surface Processes

Cite this

Handaxe manufacture and re-sharpening throughout the Lower Paleolithic sequence of Tabun Cave. / Shimelmitz, Ron; Bisson, Michael; Weinstein-Evron, Mina; Kuhn, Steven L.

In: Quaternary International, 2016.

Research output: Research - peer-reviewArticle

@article{7e2ba7da27f14efab793880fc16e64fd,
title = "Handaxe manufacture and re-sharpening throughout the Lower Paleolithic sequence of Tabun Cave",
abstract = "In this paper we assess the evidence for on-site manufacture and re-sharpening of handaxes in the Lower Paleolithic layers of Tabun Cave by examining the ratio of thinning flakes, the typical waste of bifacial manufacture, to handaxes. Our study of twenty nine assemblages ranging from the Acheulean to the Acheulo-Yabrudian complex, combining results from Jelinek's and Ronen's excavations, shows that thinning flakes are scarce throughout the entire sequence. Results indicate that handaxes were commonly not manufactured or re-sharpened in the excavated area and that these activities were most likely conducted outside the site. The late Lower Paleolithic in various parts of Eurasia and Africa is characterized by high variability in lithic technology, which in the case of the Levant is best reflected in the Acheulo-Yabrudian complex. This study aids our understanding of variability in the Levantine late Lower Paleolithic by adding the concept of segmentation of reduction as an integral part of late Lower Paleolithic lithic technology. Significantly, in Tabun Cave the segmentation of reduction that characterizes handaxe manufacture differs from the patterns observed in Amudian blade production and Yabrudian scraper manufacture, which were both regularly conducted on site. The extent of variability and flexibility is thus reflected not only in the technologies employed, but also in how different reduction sequences were segmented and executed across the landscape, suggesting a link between technical knowledge, mobility patterns and landscape exploitation.",
keywords = "Handaxes, Lithic technology, Lower Paleolithic, Segmentation of reduction, Tabun Cave",
author = "Ron Shimelmitz and Michael Bisson and Mina Weinstein-Evron and Kuhn, {Steven L.}",
year = "2016",
doi = "10.1016/j.quaint.2015.12.076",
journal = "Quaternary International",
issn = "1040-6182",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Handaxe manufacture and re-sharpening throughout the Lower Paleolithic sequence of Tabun Cave

AU - Shimelmitz,Ron

AU - Bisson,Michael

AU - Weinstein-Evron,Mina

AU - Kuhn,Steven L.

PY - 2016

Y1 - 2016

N2 - In this paper we assess the evidence for on-site manufacture and re-sharpening of handaxes in the Lower Paleolithic layers of Tabun Cave by examining the ratio of thinning flakes, the typical waste of bifacial manufacture, to handaxes. Our study of twenty nine assemblages ranging from the Acheulean to the Acheulo-Yabrudian complex, combining results from Jelinek's and Ronen's excavations, shows that thinning flakes are scarce throughout the entire sequence. Results indicate that handaxes were commonly not manufactured or re-sharpened in the excavated area and that these activities were most likely conducted outside the site. The late Lower Paleolithic in various parts of Eurasia and Africa is characterized by high variability in lithic technology, which in the case of the Levant is best reflected in the Acheulo-Yabrudian complex. This study aids our understanding of variability in the Levantine late Lower Paleolithic by adding the concept of segmentation of reduction as an integral part of late Lower Paleolithic lithic technology. Significantly, in Tabun Cave the segmentation of reduction that characterizes handaxe manufacture differs from the patterns observed in Amudian blade production and Yabrudian scraper manufacture, which were both regularly conducted on site. The extent of variability and flexibility is thus reflected not only in the technologies employed, but also in how different reduction sequences were segmented and executed across the landscape, suggesting a link between technical knowledge, mobility patterns and landscape exploitation.

AB - In this paper we assess the evidence for on-site manufacture and re-sharpening of handaxes in the Lower Paleolithic layers of Tabun Cave by examining the ratio of thinning flakes, the typical waste of bifacial manufacture, to handaxes. Our study of twenty nine assemblages ranging from the Acheulean to the Acheulo-Yabrudian complex, combining results from Jelinek's and Ronen's excavations, shows that thinning flakes are scarce throughout the entire sequence. Results indicate that handaxes were commonly not manufactured or re-sharpened in the excavated area and that these activities were most likely conducted outside the site. The late Lower Paleolithic in various parts of Eurasia and Africa is characterized by high variability in lithic technology, which in the case of the Levant is best reflected in the Acheulo-Yabrudian complex. This study aids our understanding of variability in the Levantine late Lower Paleolithic by adding the concept of segmentation of reduction as an integral part of late Lower Paleolithic lithic technology. Significantly, in Tabun Cave the segmentation of reduction that characterizes handaxe manufacture differs from the patterns observed in Amudian blade production and Yabrudian scraper manufacture, which were both regularly conducted on site. The extent of variability and flexibility is thus reflected not only in the technologies employed, but also in how different reduction sequences were segmented and executed across the landscape, suggesting a link between technical knowledge, mobility patterns and landscape exploitation.

KW - Handaxes

KW - Lithic technology

KW - Lower Paleolithic

KW - Segmentation of reduction

KW - Tabun Cave

UR - http://www.scopus.com/inward/record.url?scp=84959873460&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84959873460&partnerID=8YFLogxK

U2 - 10.1016/j.quaint.2015.12.076

DO - 10.1016/j.quaint.2015.12.076

M3 - Article

JO - Quaternary International

T2 - Quaternary International

JF - Quaternary International

SN - 1040-6182

ER -