Heat transfer on internal surfaces of a duct subjected to impingement of a jet array with varying jet hole-size and spacing

U. Uysal, Peiwen Li, M. K. Chyu, F. J. Cunha

Research output: Contribution to journalArticle

37 Citations (Scopus)

Abstract

One significant issue concerning the impingement heat transfer with a jet array is related to the so-called "crossflow," where a local jet performance is influenced by the convection of the confluence from the impingement of the jet/jets placed upstream. As a result, the heat transfer coefficient may vary along the streamwise direction and creates more or less nonuniform cooling over the component, which is undesirable from both the performance and durability standpoints. Described in this paper is an experimental investigation of the heat transfer coefficient on surfaces impinged by an array of six inline circular jets with their diameters increased monotically along the streamwise direction. The local heat transfer distributions on both the target surface and jet-issuing plate are measured using a transient liquid crystal technique. By varying the jet hole-size in a systematic manner, the actual distribution of jet flow rate and momentum within a jet array may be optimally metered and controlled against crossflow. The effects on the heat transfer coefficient distribution due to variations of jet-to-target distance and interjet spacing are investigated. The varying-diameter results are compared with those from a corresponding array of uniform jet diameter.

Original languageEnglish (US)
Pages (from-to)158-165
Number of pages8
JournalJournal of Turbomachinery
Volume128
Issue number1
DOIs
StatePublished - Jan 2006
Externally publishedYes

Fingerprint

Ducts
Heat transfer
Heat transfer coefficients
Liquid crystals
Momentum
Durability
Flow rate
Cooling

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Heat transfer on internal surfaces of a duct subjected to impingement of a jet array with varying jet hole-size and spacing. / Uysal, U.; Li, Peiwen; Chyu, M. K.; Cunha, F. J.

In: Journal of Turbomachinery, Vol. 128, No. 1, 01.2006, p. 158-165.

Research output: Contribution to journalArticle

@article{f3ff5fc9576d473da7e9bd4dd4b80991,
title = "Heat transfer on internal surfaces of a duct subjected to impingement of a jet array with varying jet hole-size and spacing",
abstract = "One significant issue concerning the impingement heat transfer with a jet array is related to the so-called {"}crossflow,{"} where a local jet performance is influenced by the convection of the confluence from the impingement of the jet/jets placed upstream. As a result, the heat transfer coefficient may vary along the streamwise direction and creates more or less nonuniform cooling over the component, which is undesirable from both the performance and durability standpoints. Described in this paper is an experimental investigation of the heat transfer coefficient on surfaces impinged by an array of six inline circular jets with their diameters increased monotically along the streamwise direction. The local heat transfer distributions on both the target surface and jet-issuing plate are measured using a transient liquid crystal technique. By varying the jet hole-size in a systematic manner, the actual distribution of jet flow rate and momentum within a jet array may be optimally metered and controlled against crossflow. The effects on the heat transfer coefficient distribution due to variations of jet-to-target distance and interjet spacing are investigated. The varying-diameter results are compared with those from a corresponding array of uniform jet diameter.",
author = "U. Uysal and Peiwen Li and Chyu, {M. K.} and Cunha, {F. J.}",
year = "2006",
month = "1",
doi = "10.1115/1.2101859",
language = "English (US)",
volume = "128",
pages = "158--165",
journal = "Journal of Turbomachinery",
issn = "0889-504X",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "1",

}

TY - JOUR

T1 - Heat transfer on internal surfaces of a duct subjected to impingement of a jet array with varying jet hole-size and spacing

AU - Uysal, U.

AU - Li, Peiwen

AU - Chyu, M. K.

AU - Cunha, F. J.

PY - 2006/1

Y1 - 2006/1

N2 - One significant issue concerning the impingement heat transfer with a jet array is related to the so-called "crossflow," where a local jet performance is influenced by the convection of the confluence from the impingement of the jet/jets placed upstream. As a result, the heat transfer coefficient may vary along the streamwise direction and creates more or less nonuniform cooling over the component, which is undesirable from both the performance and durability standpoints. Described in this paper is an experimental investigation of the heat transfer coefficient on surfaces impinged by an array of six inline circular jets with their diameters increased monotically along the streamwise direction. The local heat transfer distributions on both the target surface and jet-issuing plate are measured using a transient liquid crystal technique. By varying the jet hole-size in a systematic manner, the actual distribution of jet flow rate and momentum within a jet array may be optimally metered and controlled against crossflow. The effects on the heat transfer coefficient distribution due to variations of jet-to-target distance and interjet spacing are investigated. The varying-diameter results are compared with those from a corresponding array of uniform jet diameter.

AB - One significant issue concerning the impingement heat transfer with a jet array is related to the so-called "crossflow," where a local jet performance is influenced by the convection of the confluence from the impingement of the jet/jets placed upstream. As a result, the heat transfer coefficient may vary along the streamwise direction and creates more or less nonuniform cooling over the component, which is undesirable from both the performance and durability standpoints. Described in this paper is an experimental investigation of the heat transfer coefficient on surfaces impinged by an array of six inline circular jets with their diameters increased monotically along the streamwise direction. The local heat transfer distributions on both the target surface and jet-issuing plate are measured using a transient liquid crystal technique. By varying the jet hole-size in a systematic manner, the actual distribution of jet flow rate and momentum within a jet array may be optimally metered and controlled against crossflow. The effects on the heat transfer coefficient distribution due to variations of jet-to-target distance and interjet spacing are investigated. The varying-diameter results are compared with those from a corresponding array of uniform jet diameter.

UR - http://www.scopus.com/inward/record.url?scp=33645762345&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33645762345&partnerID=8YFLogxK

U2 - 10.1115/1.2101859

DO - 10.1115/1.2101859

M3 - Article

AN - SCOPUS:33645762345

VL - 128

SP - 158

EP - 165

JO - Journal of Turbomachinery

JF - Journal of Turbomachinery

SN - 0889-504X

IS - 1

ER -