In vivo strain measurements from hardware and lamina during spine fusion

John Szivek, Rolando F. Roberta, David S. Margolis

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

Currently, spine fusion is determined using radiography and clinical evaluation. There are discrepancies between radiographic evidence and direct measurements of fusion, such as operative exploration and biomechanical or histological measurements. In order to facilitate the rapid return of patients to normal activities, a monitoring technique to accurately detect fusion in vivo and to prevent overload during the postoperative period would be useful. The objectives of this study were to develop an implantable monitoring system consisting of CPC-coated strain gauges and a radio transmitter to detect the onset of fusion and measure strain during postsurgical activities. A patient underwent anterior release and fusion, followed by posterior instrumentation and fusion with segmental spinal instrumentation. Four strain gauges were placed during surgery. One was attached to the left-side rod and one to each of the lamina at T9, T10, and T11. An externally powered implanted radio transmitter attached to the gauges was placed in a subcutaneous pouch. Strains were monitored weekly and tabulated during various activities for 7 months. Peak strains during twisting and bending were tabulated to detect the onset of fusion. Strains were also recorded during activities such as climbing off an examination table, rising from a chair, and climbing stairs. Strains collected from the left rod indicated that, immediately postoperatively, it was loaded at acceptable levels. The largest and most consistent strain changes measured from the lamina were recorded during twisting.

Original languageEnglish (US)
Pages (from-to)243-250
Number of pages8
JournalJournal of Biomedical Materials Research - Part B Applied Biomaterials
Volume75
Issue number2
DOIs
StatePublished - Nov 2005

Fingerprint

Strain measurement
Fusion reactions
Hardware
Radio transmitters
Strain gages
Stairs
Monitoring
Radiography
Surgery
Gages

Keywords

  • Hydroxyapatite
  • Lamina strain
  • Spinal fusion
  • Surface strain
  • Telemetry

ASJC Scopus subject areas

  • Biomedical Engineering
  • Biomaterials

Cite this

In vivo strain measurements from hardware and lamina during spine fusion. / Szivek, John; Roberta, Rolando F.; Margolis, David S.

In: Journal of Biomedical Materials Research - Part B Applied Biomaterials, Vol. 75, No. 2, 11.2005, p. 243-250.

Research output: Contribution to journalArticle

@article{fc3430971a88492b89cb611d40aea2b8,
title = "In vivo strain measurements from hardware and lamina during spine fusion",
abstract = "Currently, spine fusion is determined using radiography and clinical evaluation. There are discrepancies between radiographic evidence and direct measurements of fusion, such as operative exploration and biomechanical or histological measurements. In order to facilitate the rapid return of patients to normal activities, a monitoring technique to accurately detect fusion in vivo and to prevent overload during the postoperative period would be useful. The objectives of this study were to develop an implantable monitoring system consisting of CPC-coated strain gauges and a radio transmitter to detect the onset of fusion and measure strain during postsurgical activities. A patient underwent anterior release and fusion, followed by posterior instrumentation and fusion with segmental spinal instrumentation. Four strain gauges were placed during surgery. One was attached to the left-side rod and one to each of the lamina at T9, T10, and T11. An externally powered implanted radio transmitter attached to the gauges was placed in a subcutaneous pouch. Strains were monitored weekly and tabulated during various activities for 7 months. Peak strains during twisting and bending were tabulated to detect the onset of fusion. Strains were also recorded during activities such as climbing off an examination table, rising from a chair, and climbing stairs. Strains collected from the left rod indicated that, immediately postoperatively, it was loaded at acceptable levels. The largest and most consistent strain changes measured from the lamina were recorded during twisting.",
keywords = "Hydroxyapatite, Lamina strain, Spinal fusion, Surface strain, Telemetry",
author = "John Szivek and Roberta, {Rolando F.} and Margolis, {David S.}",
year = "2005",
month = "11",
doi = "10.1002/jbm.b.30262",
language = "English (US)",
volume = "75",
pages = "243--250",
journal = "Journal of Biomedical Materials Research - Part A",
issn = "0021-9304",
publisher = "John Wiley and Sons Inc.",
number = "2",

}

TY - JOUR

T1 - In vivo strain measurements from hardware and lamina during spine fusion

AU - Szivek, John

AU - Roberta, Rolando F.

AU - Margolis, David S.

PY - 2005/11

Y1 - 2005/11

N2 - Currently, spine fusion is determined using radiography and clinical evaluation. There are discrepancies between radiographic evidence and direct measurements of fusion, such as operative exploration and biomechanical or histological measurements. In order to facilitate the rapid return of patients to normal activities, a monitoring technique to accurately detect fusion in vivo and to prevent overload during the postoperative period would be useful. The objectives of this study were to develop an implantable monitoring system consisting of CPC-coated strain gauges and a radio transmitter to detect the onset of fusion and measure strain during postsurgical activities. A patient underwent anterior release and fusion, followed by posterior instrumentation and fusion with segmental spinal instrumentation. Four strain gauges were placed during surgery. One was attached to the left-side rod and one to each of the lamina at T9, T10, and T11. An externally powered implanted radio transmitter attached to the gauges was placed in a subcutaneous pouch. Strains were monitored weekly and tabulated during various activities for 7 months. Peak strains during twisting and bending were tabulated to detect the onset of fusion. Strains were also recorded during activities such as climbing off an examination table, rising from a chair, and climbing stairs. Strains collected from the left rod indicated that, immediately postoperatively, it was loaded at acceptable levels. The largest and most consistent strain changes measured from the lamina were recorded during twisting.

AB - Currently, spine fusion is determined using radiography and clinical evaluation. There are discrepancies between radiographic evidence and direct measurements of fusion, such as operative exploration and biomechanical or histological measurements. In order to facilitate the rapid return of patients to normal activities, a monitoring technique to accurately detect fusion in vivo and to prevent overload during the postoperative period would be useful. The objectives of this study were to develop an implantable monitoring system consisting of CPC-coated strain gauges and a radio transmitter to detect the onset of fusion and measure strain during postsurgical activities. A patient underwent anterior release and fusion, followed by posterior instrumentation and fusion with segmental spinal instrumentation. Four strain gauges were placed during surgery. One was attached to the left-side rod and one to each of the lamina at T9, T10, and T11. An externally powered implanted radio transmitter attached to the gauges was placed in a subcutaneous pouch. Strains were monitored weekly and tabulated during various activities for 7 months. Peak strains during twisting and bending were tabulated to detect the onset of fusion. Strains were also recorded during activities such as climbing off an examination table, rising from a chair, and climbing stairs. Strains collected from the left rod indicated that, immediately postoperatively, it was loaded at acceptable levels. The largest and most consistent strain changes measured from the lamina were recorded during twisting.

KW - Hydroxyapatite

KW - Lamina strain

KW - Spinal fusion

KW - Surface strain

KW - Telemetry

UR - http://www.scopus.com/inward/record.url?scp=27744446041&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27744446041&partnerID=8YFLogxK

U2 - 10.1002/jbm.b.30262

DO - 10.1002/jbm.b.30262

M3 - Article

C2 - 16161111

AN - SCOPUS:27744446041

VL - 75

SP - 243

EP - 250

JO - Journal of Biomedical Materials Research - Part A

JF - Journal of Biomedical Materials Research - Part A

SN - 0021-9304

IS - 2

ER -