Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals

W. A. Soer, Katerina E Aifantis, J. Th M De Hosson

Research output: Contribution to journalArticle

133 Citations (Scopus)

Abstract

The mechanical response to nanoindentation near grain boundaries has been investigated in an Fe-14%Si bicrystal with a general grain boundary and two Mo bicrystals with symmetric tilt boundaries. In particular, the indentations performed on the Fe-14%Si show that as the grain boundary is approached, in addition to the occurrence of a first plateau in the load versus depth nanoindentation curve, which indicates grain interior yielding, a second plateau is observed, which is believed to indicate dislocation transfer across the boundary. It is noted that the hardness at the onset of these yield excursions increases as the distance of the tip to the boundary decreases, providing thus a new type of size effects, which can be obtained through nanoindentation. The energy released during an excursion compares well to the calculated interaction energy of the piled-up dislocations. Hall-Petch slope values calculated from the excursions are consistent with macroscopically determined properties, suggesting that the Hall-Petch slope may be used to predict whether slip transmission occurs during indentation. No slip transmission was observed in the Mo bicrystals; however, the staircase yielding commonly found during initial loading was suppressed in the proximity of a grain boundary due to preferential dislocation nucleation at the boundary. An estimate for the nucleation shear stress at the boundary was obtained from the measured interaction range.

Original languageEnglish (US)
Pages (from-to)4665-4676
Number of pages12
JournalActa Materialia
Volume53
Issue number17
DOIs
StatePublished - Oct 2005
Externally publishedYes

Fingerprint

Nanoindentation
Bicrystals
Plasticity
Grain boundaries
Metals
Indentation
Nucleation
Dislocations (crystals)
Shear stress
Hardness

Keywords

  • Grain boundaries
  • Nanoindentation
  • Slip
  • Yield phenomena

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Materials Science(all)
  • Metals and Alloys

Cite this

Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals. / Soer, W. A.; Aifantis, Katerina E; De Hosson, J. Th M.

In: Acta Materialia, Vol. 53, No. 17, 10.2005, p. 4665-4676.

Research output: Contribution to journalArticle

@article{ec3af32e9ce84552b019df51c72c85ca,
title = "Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals",
abstract = "The mechanical response to nanoindentation near grain boundaries has been investigated in an Fe-14{\%}Si bicrystal with a general grain boundary and two Mo bicrystals with symmetric tilt boundaries. In particular, the indentations performed on the Fe-14{\%}Si show that as the grain boundary is approached, in addition to the occurrence of a first plateau in the load versus depth nanoindentation curve, which indicates grain interior yielding, a second plateau is observed, which is believed to indicate dislocation transfer across the boundary. It is noted that the hardness at the onset of these yield excursions increases as the distance of the tip to the boundary decreases, providing thus a new type of size effects, which can be obtained through nanoindentation. The energy released during an excursion compares well to the calculated interaction energy of the piled-up dislocations. Hall-Petch slope values calculated from the excursions are consistent with macroscopically determined properties, suggesting that the Hall-Petch slope may be used to predict whether slip transmission occurs during indentation. No slip transmission was observed in the Mo bicrystals; however, the staircase yielding commonly found during initial loading was suppressed in the proximity of a grain boundary due to preferential dislocation nucleation at the boundary. An estimate for the nucleation shear stress at the boundary was obtained from the measured interaction range.",
keywords = "Grain boundaries, Nanoindentation, Slip, Yield phenomena",
author = "Soer, {W. A.} and Aifantis, {Katerina E} and {De Hosson}, {J. Th M}",
year = "2005",
month = "10",
doi = "10.1016/j.actamat.2005.07.001",
language = "English (US)",
volume = "53",
pages = "4665--4676",
journal = "Acta Materialia",
issn = "1359-6454",
publisher = "Elsevier Limited",
number = "17",

}

TY - JOUR

T1 - Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals

AU - Soer, W. A.

AU - Aifantis, Katerina E

AU - De Hosson, J. Th M

PY - 2005/10

Y1 - 2005/10

N2 - The mechanical response to nanoindentation near grain boundaries has been investigated in an Fe-14%Si bicrystal with a general grain boundary and two Mo bicrystals with symmetric tilt boundaries. In particular, the indentations performed on the Fe-14%Si show that as the grain boundary is approached, in addition to the occurrence of a first plateau in the load versus depth nanoindentation curve, which indicates grain interior yielding, a second plateau is observed, which is believed to indicate dislocation transfer across the boundary. It is noted that the hardness at the onset of these yield excursions increases as the distance of the tip to the boundary decreases, providing thus a new type of size effects, which can be obtained through nanoindentation. The energy released during an excursion compares well to the calculated interaction energy of the piled-up dislocations. Hall-Petch slope values calculated from the excursions are consistent with macroscopically determined properties, suggesting that the Hall-Petch slope may be used to predict whether slip transmission occurs during indentation. No slip transmission was observed in the Mo bicrystals; however, the staircase yielding commonly found during initial loading was suppressed in the proximity of a grain boundary due to preferential dislocation nucleation at the boundary. An estimate for the nucleation shear stress at the boundary was obtained from the measured interaction range.

AB - The mechanical response to nanoindentation near grain boundaries has been investigated in an Fe-14%Si bicrystal with a general grain boundary and two Mo bicrystals with symmetric tilt boundaries. In particular, the indentations performed on the Fe-14%Si show that as the grain boundary is approached, in addition to the occurrence of a first plateau in the load versus depth nanoindentation curve, which indicates grain interior yielding, a second plateau is observed, which is believed to indicate dislocation transfer across the boundary. It is noted that the hardness at the onset of these yield excursions increases as the distance of the tip to the boundary decreases, providing thus a new type of size effects, which can be obtained through nanoindentation. The energy released during an excursion compares well to the calculated interaction energy of the piled-up dislocations. Hall-Petch slope values calculated from the excursions are consistent with macroscopically determined properties, suggesting that the Hall-Petch slope may be used to predict whether slip transmission occurs during indentation. No slip transmission was observed in the Mo bicrystals; however, the staircase yielding commonly found during initial loading was suppressed in the proximity of a grain boundary due to preferential dislocation nucleation at the boundary. An estimate for the nucleation shear stress at the boundary was obtained from the measured interaction range.

KW - Grain boundaries

KW - Nanoindentation

KW - Slip

KW - Yield phenomena

UR - http://www.scopus.com/inward/record.url?scp=24644443841&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=24644443841&partnerID=8YFLogxK

U2 - 10.1016/j.actamat.2005.07.001

DO - 10.1016/j.actamat.2005.07.001

M3 - Article

AN - SCOPUS:24644443841

VL - 53

SP - 4665

EP - 4676

JO - Acta Materialia

JF - Acta Materialia

SN - 1359-6454

IS - 17

ER -