Influence of honing dynamics on surface formation

Alexander M. Gouskov, Sergey A. Voronov, Eric Butcher, Subhash C. Sinha

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

The dynamics of the rotating tool commonly employed in deep hole honing is considered. The mathematical model of the process including the dynamic model of the tool and the interaction of the workpiece surface and honing sticks is analyzed. The honing tool is modeled as a continuous slender beam with a honing mandrel attached at the intermediate cross section. A single row of stones on the tool rotates and has reciprocational motion in the axial direction. The honing stones are expanded to the machined surface by a special rigid mechanism that provides cutting of workpiece cylindrical surface and which vibrates in the transverse and axial directions. The removal of chip and the tool vibrations cause the variation of expansion pressure and depend on the surface state formed by previous honing stone. The equations of new surface formation are separated as a specific set of the dynamic model. These equations inherently consider the regenerative effect of oscillations during cutting. The expansion pressure, tool stiffness, and technology conditions are considered as varying parameters since their influence on the process are different. The process productivity and precision can be improved by choosing rational conditions evaluated by simulation. The corresponding models and results of numerical simulation are presented. All the results are given in dimensionless form and therefore they are applicable to a wide range of real manufacturing process conditions. The model of new surface formation presented allows the simulation of the machined surface variation in time and to predict workpiece accuracy and possible correction of surface errors.

Original languageEnglish (US)
Title of host publicationProceedings of the ASME Design Engineering Technical Conference
Pages2239-2245
Number of pages7
Volume5 C
StatePublished - 2003
Externally publishedYes
Event2003 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference - Chicago, IL, United States
Duration: Sep 2 2003Sep 6 2003

Other

Other2003 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference
CountryUnited States
CityChicago, IL
Period9/2/039/6/03

Fingerprint

Honing
Dynamic models
Surface states
Productivity
Stiffness
Mathematical models
Computer simulation

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Gouskov, A. M., Voronov, S. A., Butcher, E., & Sinha, S. C. (2003). Influence of honing dynamics on surface formation. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 5 C, pp. 2239-2245)

Influence of honing dynamics on surface formation. / Gouskov, Alexander M.; Voronov, Sergey A.; Butcher, Eric; Sinha, Subhash C.

Proceedings of the ASME Design Engineering Technical Conference. Vol. 5 C 2003. p. 2239-2245.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gouskov, AM, Voronov, SA, Butcher, E & Sinha, SC 2003, Influence of honing dynamics on surface formation. in Proceedings of the ASME Design Engineering Technical Conference. vol. 5 C, pp. 2239-2245, 2003 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, United States, 9/2/03.
Gouskov AM, Voronov SA, Butcher E, Sinha SC. Influence of honing dynamics on surface formation. In Proceedings of the ASME Design Engineering Technical Conference. Vol. 5 C. 2003. p. 2239-2245
Gouskov, Alexander M. ; Voronov, Sergey A. ; Butcher, Eric ; Sinha, Subhash C. / Influence of honing dynamics on surface formation. Proceedings of the ASME Design Engineering Technical Conference. Vol. 5 C 2003. pp. 2239-2245
@inproceedings{4049c78c05594e94a50b79add18f2ca9,
title = "Influence of honing dynamics on surface formation",
abstract = "The dynamics of the rotating tool commonly employed in deep hole honing is considered. The mathematical model of the process including the dynamic model of the tool and the interaction of the workpiece surface and honing sticks is analyzed. The honing tool is modeled as a continuous slender beam with a honing mandrel attached at the intermediate cross section. A single row of stones on the tool rotates and has reciprocational motion in the axial direction. The honing stones are expanded to the machined surface by a special rigid mechanism that provides cutting of workpiece cylindrical surface and which vibrates in the transverse and axial directions. The removal of chip and the tool vibrations cause the variation of expansion pressure and depend on the surface state formed by previous honing stone. The equations of new surface formation are separated as a specific set of the dynamic model. These equations inherently consider the regenerative effect of oscillations during cutting. The expansion pressure, tool stiffness, and technology conditions are considered as varying parameters since their influence on the process are different. The process productivity and precision can be improved by choosing rational conditions evaluated by simulation. The corresponding models and results of numerical simulation are presented. All the results are given in dimensionless form and therefore they are applicable to a wide range of real manufacturing process conditions. The model of new surface formation presented allows the simulation of the machined surface variation in time and to predict workpiece accuracy and possible correction of surface errors.",
author = "Gouskov, {Alexander M.} and Voronov, {Sergey A.} and Eric Butcher and Sinha, {Subhash C.}",
year = "2003",
language = "English (US)",
volume = "5 C",
pages = "2239--2245",
booktitle = "Proceedings of the ASME Design Engineering Technical Conference",

}

TY - GEN

T1 - Influence of honing dynamics on surface formation

AU - Gouskov, Alexander M.

AU - Voronov, Sergey A.

AU - Butcher, Eric

AU - Sinha, Subhash C.

PY - 2003

Y1 - 2003

N2 - The dynamics of the rotating tool commonly employed in deep hole honing is considered. The mathematical model of the process including the dynamic model of the tool and the interaction of the workpiece surface and honing sticks is analyzed. The honing tool is modeled as a continuous slender beam with a honing mandrel attached at the intermediate cross section. A single row of stones on the tool rotates and has reciprocational motion in the axial direction. The honing stones are expanded to the machined surface by a special rigid mechanism that provides cutting of workpiece cylindrical surface and which vibrates in the transverse and axial directions. The removal of chip and the tool vibrations cause the variation of expansion pressure and depend on the surface state formed by previous honing stone. The equations of new surface formation are separated as a specific set of the dynamic model. These equations inherently consider the regenerative effect of oscillations during cutting. The expansion pressure, tool stiffness, and technology conditions are considered as varying parameters since their influence on the process are different. The process productivity and precision can be improved by choosing rational conditions evaluated by simulation. The corresponding models and results of numerical simulation are presented. All the results are given in dimensionless form and therefore they are applicable to a wide range of real manufacturing process conditions. The model of new surface formation presented allows the simulation of the machined surface variation in time and to predict workpiece accuracy and possible correction of surface errors.

AB - The dynamics of the rotating tool commonly employed in deep hole honing is considered. The mathematical model of the process including the dynamic model of the tool and the interaction of the workpiece surface and honing sticks is analyzed. The honing tool is modeled as a continuous slender beam with a honing mandrel attached at the intermediate cross section. A single row of stones on the tool rotates and has reciprocational motion in the axial direction. The honing stones are expanded to the machined surface by a special rigid mechanism that provides cutting of workpiece cylindrical surface and which vibrates in the transverse and axial directions. The removal of chip and the tool vibrations cause the variation of expansion pressure and depend on the surface state formed by previous honing stone. The equations of new surface formation are separated as a specific set of the dynamic model. These equations inherently consider the regenerative effect of oscillations during cutting. The expansion pressure, tool stiffness, and technology conditions are considered as varying parameters since their influence on the process are different. The process productivity and precision can be improved by choosing rational conditions evaluated by simulation. The corresponding models and results of numerical simulation are presented. All the results are given in dimensionless form and therefore they are applicable to a wide range of real manufacturing process conditions. The model of new surface formation presented allows the simulation of the machined surface variation in time and to predict workpiece accuracy and possible correction of surface errors.

UR - http://www.scopus.com/inward/record.url?scp=1842683811&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=1842683811&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:1842683811

VL - 5 C

SP - 2239

EP - 2245

BT - Proceedings of the ASME Design Engineering Technical Conference

ER -