Instability modes of two-phase flows in a mixing-layer microdevice

Tak For Yu, Sylvanus Yuk Kwan Lee, Man Wong, Yitshak Zohar

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Extensive development of biomedical and chemical analytic microdevices involves microscale fluid flows. Merging of fluid streams is expected to be a key feature in such devices. An integrated microsystem consisting of merging microchannels and distributed pressure microsensors has been designed and characterized to study this phenomenon on a microscale. The two narrow, uniform and identical channels merged smoothly into a wide, straight and uniform channel downstream of a splitter plate. All of the devices were fabricated using standard micromachining techniques. Mass flow rates and pressure distributions were measured for single-phase gas flow in order to characterize the device. The experimental results indicated that the flow developed when both inlets were connected together to the gas source could be modeled as gas flow through a straight and uniform microchannel. The flow through a single branch while the other was blocked, however, could be modeled as gas flow through a pair of microchannels in series. Flow visualizations of two-phase flows have been conducted when driving liquid and gas through the inlet channels. Several instability modes of the gas/liquid interface have been observed as a function of the pressure difference between the two streams at the merging location.

Original languageEnglish (US)
Title of host publicationASME International Mechanical Engineering Congress and Exposition, Proceedings
Pages3153-3158
Number of pages6
Volume2
StatePublished - 2001
Externally publishedYes
Event2001 ASME International Mechanical Engineering Congress and Exposition - New York, NY, United States
Duration: Nov 11 2001Nov 16 2001

Other

Other2001 ASME International Mechanical Engineering Congress and Exposition
CountryUnited States
CityNew York, NY
Period11/11/0111/16/01

Fingerprint

Microchannels
Merging
Two phase flow
Flow of gases
Gases
Microsensors
Microsystems
Micromachining
Liquids
Flow visualization
Pressure distribution
Flow of fluids
Flow rate
Fluids

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Yu, T. F., Lee, S. Y. K., Wong, M., & Zohar, Y. (2001). Instability modes of two-phase flows in a mixing-layer microdevice. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (Vol. 2, pp. 3153-3158)

Instability modes of two-phase flows in a mixing-layer microdevice. / Yu, Tak For; Lee, Sylvanus Yuk Kwan; Wong, Man; Zohar, Yitshak.

ASME International Mechanical Engineering Congress and Exposition, Proceedings. Vol. 2 2001. p. 3153-3158.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yu, TF, Lee, SYK, Wong, M & Zohar, Y 2001, Instability modes of two-phase flows in a mixing-layer microdevice. in ASME International Mechanical Engineering Congress and Exposition, Proceedings. vol. 2, pp. 3153-3158, 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, United States, 11/11/01.
Yu TF, Lee SYK, Wong M, Zohar Y. Instability modes of two-phase flows in a mixing-layer microdevice. In ASME International Mechanical Engineering Congress and Exposition, Proceedings. Vol. 2. 2001. p. 3153-3158
Yu, Tak For ; Lee, Sylvanus Yuk Kwan ; Wong, Man ; Zohar, Yitshak. / Instability modes of two-phase flows in a mixing-layer microdevice. ASME International Mechanical Engineering Congress and Exposition, Proceedings. Vol. 2 2001. pp. 3153-3158
@inproceedings{562647f81ede44ebbbff452961fb7589,
title = "Instability modes of two-phase flows in a mixing-layer microdevice",
abstract = "Extensive development of biomedical and chemical analytic microdevices involves microscale fluid flows. Merging of fluid streams is expected to be a key feature in such devices. An integrated microsystem consisting of merging microchannels and distributed pressure microsensors has been designed and characterized to study this phenomenon on a microscale. The two narrow, uniform and identical channels merged smoothly into a wide, straight and uniform channel downstream of a splitter plate. All of the devices were fabricated using standard micromachining techniques. Mass flow rates and pressure distributions were measured for single-phase gas flow in order to characterize the device. The experimental results indicated that the flow developed when both inlets were connected together to the gas source could be modeled as gas flow through a straight and uniform microchannel. The flow through a single branch while the other was blocked, however, could be modeled as gas flow through a pair of microchannels in series. Flow visualizations of two-phase flows have been conducted when driving liquid and gas through the inlet channels. Several instability modes of the gas/liquid interface have been observed as a function of the pressure difference between the two streams at the merging location.",
author = "Yu, {Tak For} and Lee, {Sylvanus Yuk Kwan} and Man Wong and Yitshak Zohar",
year = "2001",
language = "English (US)",
volume = "2",
pages = "3153--3158",
booktitle = "ASME International Mechanical Engineering Congress and Exposition, Proceedings",

}

TY - GEN

T1 - Instability modes of two-phase flows in a mixing-layer microdevice

AU - Yu, Tak For

AU - Lee, Sylvanus Yuk Kwan

AU - Wong, Man

AU - Zohar, Yitshak

PY - 2001

Y1 - 2001

N2 - Extensive development of biomedical and chemical analytic microdevices involves microscale fluid flows. Merging of fluid streams is expected to be a key feature in such devices. An integrated microsystem consisting of merging microchannels and distributed pressure microsensors has been designed and characterized to study this phenomenon on a microscale. The two narrow, uniform and identical channels merged smoothly into a wide, straight and uniform channel downstream of a splitter plate. All of the devices were fabricated using standard micromachining techniques. Mass flow rates and pressure distributions were measured for single-phase gas flow in order to characterize the device. The experimental results indicated that the flow developed when both inlets were connected together to the gas source could be modeled as gas flow through a straight and uniform microchannel. The flow through a single branch while the other was blocked, however, could be modeled as gas flow through a pair of microchannels in series. Flow visualizations of two-phase flows have been conducted when driving liquid and gas through the inlet channels. Several instability modes of the gas/liquid interface have been observed as a function of the pressure difference between the two streams at the merging location.

AB - Extensive development of biomedical and chemical analytic microdevices involves microscale fluid flows. Merging of fluid streams is expected to be a key feature in such devices. An integrated microsystem consisting of merging microchannels and distributed pressure microsensors has been designed and characterized to study this phenomenon on a microscale. The two narrow, uniform and identical channels merged smoothly into a wide, straight and uniform channel downstream of a splitter plate. All of the devices were fabricated using standard micromachining techniques. Mass flow rates and pressure distributions were measured for single-phase gas flow in order to characterize the device. The experimental results indicated that the flow developed when both inlets were connected together to the gas source could be modeled as gas flow through a straight and uniform microchannel. The flow through a single branch while the other was blocked, however, could be modeled as gas flow through a pair of microchannels in series. Flow visualizations of two-phase flows have been conducted when driving liquid and gas through the inlet channels. Several instability modes of the gas/liquid interface have been observed as a function of the pressure difference between the two streams at the merging location.

UR - http://www.scopus.com/inward/record.url?scp=1542411500&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=1542411500&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:1542411500

VL - 2

SP - 3153

EP - 3158

BT - ASME International Mechanical Engineering Congress and Exposition, Proceedings

ER -