Intake Fraction Variability Between Air Pollution Emission Sources Inside an Urban Area

Marko Tainio, Piotr Holnicki, Miranda M Loh, Zbigniew Nahorski

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

The cost-effective mitigation of adverse health effects caused by air pollution requires information on the contribution of different emission sources to exposure. In urban areas the exposure potential of different sources may vary significantly depending on emission height, population density, and other factors. In this study, we quantified this intraurban variability by predicting intake fraction (iF) for 3,066 emission sources in Warsaw, Poland. iF describes the fraction of the pollutant that is inhaled by people in the study area. We considered the following seven pollutants: particulate matter (PM), nitrogen oxides (NOx), sulfur dioxide (SO2), benzo[a] pyrene (BaP), nickel (Ni), cadmium (Cd), and lead (Pb). Emissions for these pollutants were grouped into four emission source categories (Mobile, Area, High Point, and Other Point sources). The dispersion of the pollutants was predicted with the CALPUFF dispersion model using the year 2005 emission rate data and meteorological records. The resulting annual average concentrations were combined with population data to predict the contribution of each individual source to population exposure. The iFs for different pollutant-source category combinations varied between 51 per million (PM from Mobile sources) and 0.013 per million (sulfate PM from High Point sources). The intraurban iF variability for Mobile sources primary PM emission was from 4 per million to 100 per million with the emission-weighted iF of 44 per million. These results propose that exposure due to intraurban air pollution emissions could be decreased more effectively by specifically targeting sources with high exposure potency rather than all sources.

Original languageEnglish (US)
Pages (from-to)2021-2034
Number of pages14
JournalRisk Analysis
Volume34
Issue number11
DOIs
StatePublished - Nov 1 2014

Fingerprint

Particulate Matter
Air Pollution
Air pollution
Pyrene
Nitrogen oxides
Sulfur dioxide
Cadmium
Lead
Nickel
Health
Nitrogen Oxides
Sulfur Dioxide
Benzo(a)pyrene
Poland
Population Density
Population
Sulfates
Costs
Costs and Cost Analysis

Keywords

  • Air pollution
  • Atmospheric dispersion model
  • Exposure
  • Health impact assessment
  • Intake fraction

ASJC Scopus subject areas

  • Physiology (medical)
  • Safety, Risk, Reliability and Quality

Cite this

Intake Fraction Variability Between Air Pollution Emission Sources Inside an Urban Area. / Tainio, Marko; Holnicki, Piotr; Loh, Miranda M; Nahorski, Zbigniew.

In: Risk Analysis, Vol. 34, No. 11, 01.11.2014, p. 2021-2034.

Research output: Contribution to journalArticle

Tainio, Marko ; Holnicki, Piotr ; Loh, Miranda M ; Nahorski, Zbigniew. / Intake Fraction Variability Between Air Pollution Emission Sources Inside an Urban Area. In: Risk Analysis. 2014 ; Vol. 34, No. 11. pp. 2021-2034.
@article{bb5d54de3c8e41318e6cdee0d0da7bc5,
title = "Intake Fraction Variability Between Air Pollution Emission Sources Inside an Urban Area",
abstract = "The cost-effective mitigation of adverse health effects caused by air pollution requires information on the contribution of different emission sources to exposure. In urban areas the exposure potential of different sources may vary significantly depending on emission height, population density, and other factors. In this study, we quantified this intraurban variability by predicting intake fraction (iF) for 3,066 emission sources in Warsaw, Poland. iF describes the fraction of the pollutant that is inhaled by people in the study area. We considered the following seven pollutants: particulate matter (PM), nitrogen oxides (NOx), sulfur dioxide (SO2), benzo[a] pyrene (BaP), nickel (Ni), cadmium (Cd), and lead (Pb). Emissions for these pollutants were grouped into four emission source categories (Mobile, Area, High Point, and Other Point sources). The dispersion of the pollutants was predicted with the CALPUFF dispersion model using the year 2005 emission rate data and meteorological records. The resulting annual average concentrations were combined with population data to predict the contribution of each individual source to population exposure. The iFs for different pollutant-source category combinations varied between 51 per million (PM from Mobile sources) and 0.013 per million (sulfate PM from High Point sources). The intraurban iF variability for Mobile sources primary PM emission was from 4 per million to 100 per million with the emission-weighted iF of 44 per million. These results propose that exposure due to intraurban air pollution emissions could be decreased more effectively by specifically targeting sources with high exposure potency rather than all sources.",
keywords = "Air pollution, Atmospheric dispersion model, Exposure, Health impact assessment, Intake fraction",
author = "Marko Tainio and Piotr Holnicki and Loh, {Miranda M} and Zbigniew Nahorski",
year = "2014",
month = "11",
day = "1",
doi = "10.1111/risa.12221",
language = "English (US)",
volume = "34",
pages = "2021--2034",
journal = "Risk Analysis",
issn = "0272-4332",
publisher = "Wiley-Blackwell",
number = "11",

}

TY - JOUR

T1 - Intake Fraction Variability Between Air Pollution Emission Sources Inside an Urban Area

AU - Tainio, Marko

AU - Holnicki, Piotr

AU - Loh, Miranda M

AU - Nahorski, Zbigniew

PY - 2014/11/1

Y1 - 2014/11/1

N2 - The cost-effective mitigation of adverse health effects caused by air pollution requires information on the contribution of different emission sources to exposure. In urban areas the exposure potential of different sources may vary significantly depending on emission height, population density, and other factors. In this study, we quantified this intraurban variability by predicting intake fraction (iF) for 3,066 emission sources in Warsaw, Poland. iF describes the fraction of the pollutant that is inhaled by people in the study area. We considered the following seven pollutants: particulate matter (PM), nitrogen oxides (NOx), sulfur dioxide (SO2), benzo[a] pyrene (BaP), nickel (Ni), cadmium (Cd), and lead (Pb). Emissions for these pollutants were grouped into four emission source categories (Mobile, Area, High Point, and Other Point sources). The dispersion of the pollutants was predicted with the CALPUFF dispersion model using the year 2005 emission rate data and meteorological records. The resulting annual average concentrations were combined with population data to predict the contribution of each individual source to population exposure. The iFs for different pollutant-source category combinations varied between 51 per million (PM from Mobile sources) and 0.013 per million (sulfate PM from High Point sources). The intraurban iF variability for Mobile sources primary PM emission was from 4 per million to 100 per million with the emission-weighted iF of 44 per million. These results propose that exposure due to intraurban air pollution emissions could be decreased more effectively by specifically targeting sources with high exposure potency rather than all sources.

AB - The cost-effective mitigation of adverse health effects caused by air pollution requires information on the contribution of different emission sources to exposure. In urban areas the exposure potential of different sources may vary significantly depending on emission height, population density, and other factors. In this study, we quantified this intraurban variability by predicting intake fraction (iF) for 3,066 emission sources in Warsaw, Poland. iF describes the fraction of the pollutant that is inhaled by people in the study area. We considered the following seven pollutants: particulate matter (PM), nitrogen oxides (NOx), sulfur dioxide (SO2), benzo[a] pyrene (BaP), nickel (Ni), cadmium (Cd), and lead (Pb). Emissions for these pollutants were grouped into four emission source categories (Mobile, Area, High Point, and Other Point sources). The dispersion of the pollutants was predicted with the CALPUFF dispersion model using the year 2005 emission rate data and meteorological records. The resulting annual average concentrations were combined with population data to predict the contribution of each individual source to population exposure. The iFs for different pollutant-source category combinations varied between 51 per million (PM from Mobile sources) and 0.013 per million (sulfate PM from High Point sources). The intraurban iF variability for Mobile sources primary PM emission was from 4 per million to 100 per million with the emission-weighted iF of 44 per million. These results propose that exposure due to intraurban air pollution emissions could be decreased more effectively by specifically targeting sources with high exposure potency rather than all sources.

KW - Air pollution

KW - Atmospheric dispersion model

KW - Exposure

KW - Health impact assessment

KW - Intake fraction

UR - http://www.scopus.com/inward/record.url?scp=84919866088&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84919866088&partnerID=8YFLogxK

U2 - 10.1111/risa.12221

DO - 10.1111/risa.12221

M3 - Article

VL - 34

SP - 2021

EP - 2034

JO - Risk Analysis

JF - Risk Analysis

SN - 0272-4332

IS - 11

ER -