Interactions between vapor-phase mercury compounds and coal char in synthetic flue gas

Baochun Wu, Thomas W. Peterson, Farhang Shadman, Constance L. Senior, Joseph R. Morency, Frank E. Huggins, Gerald P. Huffman

Research output: Contribution to journalArticle

31 Citations (Scopus)

Abstract

Data suggest that coal-fired power plants are a significant source of atmospheric mercury. Predicting emissions of mercury and the speciation of mercury in combustion emissions cannot be done without a fundamental understanding of the chemical reactions of mercury in flue gas. In this work, chars generated from three coals were used as sorbent material for both elemental mercury and mercuric chloride. The temperature of the source as well as the char sorbent was carefully controlled at either 343 or 433 K (70 or 160 °C). When exposed to a synthetic flue gas consisting of O2, H2O, CO2, and N2, both Hg0 and HgCl2 were adsorbed by coal char. The rank of the coal seemed to have a large effect on the adsorption of Hg0, but not on adsorption of HgCl2. The bituminous chars adsorbed similar amounts of Hg0, while the sub-bituminous char adsorbed almost an order of magnitude less. The amount of Hg0 adsorbed did not appear to be correlated with the sulfur content of the char. The rank dependence suggests that some other characteristic of the char, for example, pore structure or surface functional groups may be important for adsorption of elemental mercury. Adsorption of HgCl2 was higher by a factor of two for the bituminous chars and 50 times higher for the sub-bituminous char. The adsorption of HgCl2 showed less differences as a function of coal rank and a better agreement among all chars with respect to char surface area. This suggests that adsorption of HgCl2 on char may be by a physical adsorption process and, therefore, char surface area would be a good indicator of capacity for HgCl2.

Original languageEnglish (US)
Pages (from-to)93-107
Number of pages15
JournalFuel Processing Technology
Volume63
Issue number2
DOIs
StatePublished - Apr 2000

Fingerprint

Mercury compounds
Mercury Compounds
Mercuric Chloride
Coal
Flue gases
Mercury
Vapors
Adsorption
Sorbents
Pore structure
Sulfur
Functional groups
Chemical reactions
Power plants

ASJC Scopus subject areas

  • Organic Chemistry
  • Energy Engineering and Power Technology
  • Fuel Technology

Cite this

Wu, B., Peterson, T. W., Shadman, F., Senior, C. L., Morency, J. R., Huggins, F. E., & Huffman, G. P. (2000). Interactions between vapor-phase mercury compounds and coal char in synthetic flue gas. Fuel Processing Technology, 63(2), 93-107. https://doi.org/10.1016/S0378-3820(99)00091-0

Interactions between vapor-phase mercury compounds and coal char in synthetic flue gas. / Wu, Baochun; Peterson, Thomas W.; Shadman, Farhang; Senior, Constance L.; Morency, Joseph R.; Huggins, Frank E.; Huffman, Gerald P.

In: Fuel Processing Technology, Vol. 63, No. 2, 04.2000, p. 93-107.

Research output: Contribution to journalArticle

Wu, Baochun ; Peterson, Thomas W. ; Shadman, Farhang ; Senior, Constance L. ; Morency, Joseph R. ; Huggins, Frank E. ; Huffman, Gerald P. / Interactions between vapor-phase mercury compounds and coal char in synthetic flue gas. In: Fuel Processing Technology. 2000 ; Vol. 63, No. 2. pp. 93-107.
@article{ca2fc7d2ea8a43f3842f6fd3c4631583,
title = "Interactions between vapor-phase mercury compounds and coal char in synthetic flue gas",
abstract = "Data suggest that coal-fired power plants are a significant source of atmospheric mercury. Predicting emissions of mercury and the speciation of mercury in combustion emissions cannot be done without a fundamental understanding of the chemical reactions of mercury in flue gas. In this work, chars generated from three coals were used as sorbent material for both elemental mercury and mercuric chloride. The temperature of the source as well as the char sorbent was carefully controlled at either 343 or 433 K (70 or 160 °C). When exposed to a synthetic flue gas consisting of O2, H2O, CO2, and N2, both Hg0 and HgCl2 were adsorbed by coal char. The rank of the coal seemed to have a large effect on the adsorption of Hg0, but not on adsorption of HgCl2. The bituminous chars adsorbed similar amounts of Hg0, while the sub-bituminous char adsorbed almost an order of magnitude less. The amount of Hg0 adsorbed did not appear to be correlated with the sulfur content of the char. The rank dependence suggests that some other characteristic of the char, for example, pore structure or surface functional groups may be important for adsorption of elemental mercury. Adsorption of HgCl2 was higher by a factor of two for the bituminous chars and 50 times higher for the sub-bituminous char. The adsorption of HgCl2 showed less differences as a function of coal rank and a better agreement among all chars with respect to char surface area. This suggests that adsorption of HgCl2 on char may be by a physical adsorption process and, therefore, char surface area would be a good indicator of capacity for HgCl2.",
author = "Baochun Wu and Peterson, {Thomas W.} and Farhang Shadman and Senior, {Constance L.} and Morency, {Joseph R.} and Huggins, {Frank E.} and Huffman, {Gerald P.}",
year = "2000",
month = "4",
doi = "10.1016/S0378-3820(99)00091-0",
language = "English (US)",
volume = "63",
pages = "93--107",
journal = "Fuel Processing Technology",
issn = "0378-3820",
publisher = "Elsevier",
number = "2",

}

TY - JOUR

T1 - Interactions between vapor-phase mercury compounds and coal char in synthetic flue gas

AU - Wu, Baochun

AU - Peterson, Thomas W.

AU - Shadman, Farhang

AU - Senior, Constance L.

AU - Morency, Joseph R.

AU - Huggins, Frank E.

AU - Huffman, Gerald P.

PY - 2000/4

Y1 - 2000/4

N2 - Data suggest that coal-fired power plants are a significant source of atmospheric mercury. Predicting emissions of mercury and the speciation of mercury in combustion emissions cannot be done without a fundamental understanding of the chemical reactions of mercury in flue gas. In this work, chars generated from three coals were used as sorbent material for both elemental mercury and mercuric chloride. The temperature of the source as well as the char sorbent was carefully controlled at either 343 or 433 K (70 or 160 °C). When exposed to a synthetic flue gas consisting of O2, H2O, CO2, and N2, both Hg0 and HgCl2 were adsorbed by coal char. The rank of the coal seemed to have a large effect on the adsorption of Hg0, but not on adsorption of HgCl2. The bituminous chars adsorbed similar amounts of Hg0, while the sub-bituminous char adsorbed almost an order of magnitude less. The amount of Hg0 adsorbed did not appear to be correlated with the sulfur content of the char. The rank dependence suggests that some other characteristic of the char, for example, pore structure or surface functional groups may be important for adsorption of elemental mercury. Adsorption of HgCl2 was higher by a factor of two for the bituminous chars and 50 times higher for the sub-bituminous char. The adsorption of HgCl2 showed less differences as a function of coal rank and a better agreement among all chars with respect to char surface area. This suggests that adsorption of HgCl2 on char may be by a physical adsorption process and, therefore, char surface area would be a good indicator of capacity for HgCl2.

AB - Data suggest that coal-fired power plants are a significant source of atmospheric mercury. Predicting emissions of mercury and the speciation of mercury in combustion emissions cannot be done without a fundamental understanding of the chemical reactions of mercury in flue gas. In this work, chars generated from three coals were used as sorbent material for both elemental mercury and mercuric chloride. The temperature of the source as well as the char sorbent was carefully controlled at either 343 or 433 K (70 or 160 °C). When exposed to a synthetic flue gas consisting of O2, H2O, CO2, and N2, both Hg0 and HgCl2 were adsorbed by coal char. The rank of the coal seemed to have a large effect on the adsorption of Hg0, but not on adsorption of HgCl2. The bituminous chars adsorbed similar amounts of Hg0, while the sub-bituminous char adsorbed almost an order of magnitude less. The amount of Hg0 adsorbed did not appear to be correlated with the sulfur content of the char. The rank dependence suggests that some other characteristic of the char, for example, pore structure or surface functional groups may be important for adsorption of elemental mercury. Adsorption of HgCl2 was higher by a factor of two for the bituminous chars and 50 times higher for the sub-bituminous char. The adsorption of HgCl2 showed less differences as a function of coal rank and a better agreement among all chars with respect to char surface area. This suggests that adsorption of HgCl2 on char may be by a physical adsorption process and, therefore, char surface area would be a good indicator of capacity for HgCl2.

UR - http://www.scopus.com/inward/record.url?scp=0033888223&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033888223&partnerID=8YFLogxK

U2 - 10.1016/S0378-3820(99)00091-0

DO - 10.1016/S0378-3820(99)00091-0

M3 - Article

VL - 63

SP - 93

EP - 107

JO - Fuel Processing Technology

JF - Fuel Processing Technology

SN - 0378-3820

IS - 2

ER -