Interface behavior between carbon-fiber polymer and sand

Vahab Toufigh, Ahad Ouria, Chandrakant S. Desai, Navid Javid, Vahid Toufigh, Hamid Saadatmanesh

Research output: Contribution to journalArticle

16 Scopus citations

Abstract

Interface shear strength between soil and structural materials is dependent on the confining pressure. To increase the confining pressure, different methods of reinforcement and materials, such as carbon-fiber-reinforced polymer (CFRP) can be used. The shear strength of CFRP-improved soil is dependent on the interface properties of the soil and CFRP. The objective of this study is to investigate the interface properties (friction angle and adhesion) of sand and FRP experimentally using the direct shear test apparatus. To increase the surface roughness to improve the interface properties, a layer of sand was placed on saturated carbon fiber during the curing period [spark plasma sintering CFRP (SPSCFRP)] and normal stress was applied on the sand. More than 60 interface shear tests were conducted with different curing times, shear rates, and normal stresses on SPSCFRP during curing time. Tests showed that as normal stress on SPSCFRP during curing time increased, the friction angle increased; however, increasing the curing times and the rate of shearing had a small influence on interface properties.

Original languageEnglish (US)
Pages (from-to)385-390
Number of pages6
JournalJournal of Testing and Evaluation
Volume44
Issue number1
DOIs
StatePublished - Jan 2016

Keywords

  • Carbon fiber
  • Curing
  • Geosynthetics
  • Geotextile
  • Soil reinforcement

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Interface behavior between carbon-fiber polymer and sand'. Together they form a unique fingerprint.

  • Cite this