Intraplate stresses and plate-driving forces in the Philippine Sea Plate

Kim M. Pacanovsky, Dan M. Davis, Randall Richardson, David D. Coblentz

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

We use a spherical shell elastic finite element analysis to characterize intraplate stresses and plate-driving forces in the Philippine Sea Plate. Our finite element mesh is comprised of 489 nodes and 914 elements, and provide a spatial resolution of about 1°. The Philippine Sea Plate is unusual in that it does not have large numbers of seismic or tectonic stress indicators, and there are no midplate borehole stress data which can be used as constraints in this finite element study. However, it does possess a unique boundary configuration which potentially can lend more insight to plate forces and stresses than can similar studies on plates with more seismically active interiors. Because the plate's boundary consists primarily of subduction zones with roughly equal proportions of boundary on the overlying and downgoing sides of trench, the resultant plate stress field is very sensitive to subduction-related forces. As a result, borehole stress measurements in certain parts of the plate would be useful in further constraining these forces. We find that trench pull forces can explain a large component of the velocity of the Philippine Sea Plate. However, trench pull has somewhat less overall effect on the stresses across the plate than do the lateral density and topographic variations within the plate (i.e., gravitational or potential energy force), and trench suction forces are probably about an order of magnitude smaller than the net trench pull forces. Collisional forces may dominate the stress fields near Taiwan and the Izu Peninsula, but they are of only secondary importance in determining the motion and deformation of the Philippine Sea Plate. The forces that generate stress orientations most closely matching the observed stress indicators produce a lithospheric stress field across the plate that averages about 15 MPa over a 70 km thick lithosphere, scaling inversely with lithosphere thickness. Values up to four times as great are produced locally.

Original languageEnglish (US)
Article number98JB02845
Pages (from-to)1095-1110
Number of pages16
JournalJournal of Geophysical Research: Space Physics
Volume104
Issue numberB1
StatePublished - 1999

Fingerprint

Philippines
Philippine Sea plate
trench
stress field
lithosphere
borehole
stress distribution
Boreholes
stress measurement
boreholes
potential energy
plate boundary
suction
subduction zone
spatial resolution
subduction
Stress measurement
Tectonics
Potential energy
shell

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Geophysics
  • Earth and Planetary Sciences (miscellaneous)
  • Space and Planetary Science
  • Atmospheric Science
  • Astronomy and Astrophysics
  • Oceanography

Cite this

Pacanovsky, K. M., Davis, D. M., Richardson, R., & Coblentz, D. D. (1999). Intraplate stresses and plate-driving forces in the Philippine Sea Plate. Journal of Geophysical Research: Space Physics, 104(B1), 1095-1110. [98JB02845].

Intraplate stresses and plate-driving forces in the Philippine Sea Plate. / Pacanovsky, Kim M.; Davis, Dan M.; Richardson, Randall; Coblentz, David D.

In: Journal of Geophysical Research: Space Physics, Vol. 104, No. B1, 98JB02845, 1999, p. 1095-1110.

Research output: Contribution to journalArticle

Pacanovsky, KM, Davis, DM, Richardson, R & Coblentz, DD 1999, 'Intraplate stresses and plate-driving forces in the Philippine Sea Plate', Journal of Geophysical Research: Space Physics, vol. 104, no. B1, 98JB02845, pp. 1095-1110.
Pacanovsky, Kim M. ; Davis, Dan M. ; Richardson, Randall ; Coblentz, David D. / Intraplate stresses and plate-driving forces in the Philippine Sea Plate. In: Journal of Geophysical Research: Space Physics. 1999 ; Vol. 104, No. B1. pp. 1095-1110.
@article{e0c41ffd87f54551b4d391f2ddd6d2b7,
title = "Intraplate stresses and plate-driving forces in the Philippine Sea Plate",
abstract = "We use a spherical shell elastic finite element analysis to characterize intraplate stresses and plate-driving forces in the Philippine Sea Plate. Our finite element mesh is comprised of 489 nodes and 914 elements, and provide a spatial resolution of about 1°. The Philippine Sea Plate is unusual in that it does not have large numbers of seismic or tectonic stress indicators, and there are no midplate borehole stress data which can be used as constraints in this finite element study. However, it does possess a unique boundary configuration which potentially can lend more insight to plate forces and stresses than can similar studies on plates with more seismically active interiors. Because the plate's boundary consists primarily of subduction zones with roughly equal proportions of boundary on the overlying and downgoing sides of trench, the resultant plate stress field is very sensitive to subduction-related forces. As a result, borehole stress measurements in certain parts of the plate would be useful in further constraining these forces. We find that trench pull forces can explain a large component of the velocity of the Philippine Sea Plate. However, trench pull has somewhat less overall effect on the stresses across the plate than do the lateral density and topographic variations within the plate (i.e., gravitational or potential energy force), and trench suction forces are probably about an order of magnitude smaller than the net trench pull forces. Collisional forces may dominate the stress fields near Taiwan and the Izu Peninsula, but they are of only secondary importance in determining the motion and deformation of the Philippine Sea Plate. The forces that generate stress orientations most closely matching the observed stress indicators produce a lithospheric stress field across the plate that averages about 15 MPa over a 70 km thick lithosphere, scaling inversely with lithosphere thickness. Values up to four times as great are produced locally.",
author = "Pacanovsky, {Kim M.} and Davis, {Dan M.} and Randall Richardson and Coblentz, {David D.}",
year = "1999",
language = "English (US)",
volume = "104",
pages = "1095--1110",
journal = "Journal of Geophysical Research: Space Physics",
issn = "2169-9380",
publisher = "Wiley-Blackwell",
number = "B1",

}

TY - JOUR

T1 - Intraplate stresses and plate-driving forces in the Philippine Sea Plate

AU - Pacanovsky, Kim M.

AU - Davis, Dan M.

AU - Richardson, Randall

AU - Coblentz, David D.

PY - 1999

Y1 - 1999

N2 - We use a spherical shell elastic finite element analysis to characterize intraplate stresses and plate-driving forces in the Philippine Sea Plate. Our finite element mesh is comprised of 489 nodes and 914 elements, and provide a spatial resolution of about 1°. The Philippine Sea Plate is unusual in that it does not have large numbers of seismic or tectonic stress indicators, and there are no midplate borehole stress data which can be used as constraints in this finite element study. However, it does possess a unique boundary configuration which potentially can lend more insight to plate forces and stresses than can similar studies on plates with more seismically active interiors. Because the plate's boundary consists primarily of subduction zones with roughly equal proportions of boundary on the overlying and downgoing sides of trench, the resultant plate stress field is very sensitive to subduction-related forces. As a result, borehole stress measurements in certain parts of the plate would be useful in further constraining these forces. We find that trench pull forces can explain a large component of the velocity of the Philippine Sea Plate. However, trench pull has somewhat less overall effect on the stresses across the plate than do the lateral density and topographic variations within the plate (i.e., gravitational or potential energy force), and trench suction forces are probably about an order of magnitude smaller than the net trench pull forces. Collisional forces may dominate the stress fields near Taiwan and the Izu Peninsula, but they are of only secondary importance in determining the motion and deformation of the Philippine Sea Plate. The forces that generate stress orientations most closely matching the observed stress indicators produce a lithospheric stress field across the plate that averages about 15 MPa over a 70 km thick lithosphere, scaling inversely with lithosphere thickness. Values up to four times as great are produced locally.

AB - We use a spherical shell elastic finite element analysis to characterize intraplate stresses and plate-driving forces in the Philippine Sea Plate. Our finite element mesh is comprised of 489 nodes and 914 elements, and provide a spatial resolution of about 1°. The Philippine Sea Plate is unusual in that it does not have large numbers of seismic or tectonic stress indicators, and there are no midplate borehole stress data which can be used as constraints in this finite element study. However, it does possess a unique boundary configuration which potentially can lend more insight to plate forces and stresses than can similar studies on plates with more seismically active interiors. Because the plate's boundary consists primarily of subduction zones with roughly equal proportions of boundary on the overlying and downgoing sides of trench, the resultant plate stress field is very sensitive to subduction-related forces. As a result, borehole stress measurements in certain parts of the plate would be useful in further constraining these forces. We find that trench pull forces can explain a large component of the velocity of the Philippine Sea Plate. However, trench pull has somewhat less overall effect on the stresses across the plate than do the lateral density and topographic variations within the plate (i.e., gravitational or potential energy force), and trench suction forces are probably about an order of magnitude smaller than the net trench pull forces. Collisional forces may dominate the stress fields near Taiwan and the Izu Peninsula, but they are of only secondary importance in determining the motion and deformation of the Philippine Sea Plate. The forces that generate stress orientations most closely matching the observed stress indicators produce a lithospheric stress field across the plate that averages about 15 MPa over a 70 km thick lithosphere, scaling inversely with lithosphere thickness. Values up to four times as great are produced locally.

UR - http://www.scopus.com/inward/record.url?scp=0033540291&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033540291&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0033540291

VL - 104

SP - 1095

EP - 1110

JO - Journal of Geophysical Research: Space Physics

JF - Journal of Geophysical Research: Space Physics

SN - 2169-9380

IS - B1

M1 - 98JB02845

ER -