Investigation of surface textured sensing skin for fatigue crack localization and quantification

Han Liu, Simon Laflamme, Jian Li, Caroline Bennett, William Collins, Austin Downey, Paul Ziehl, Hongki Jo

Research output: Contribution to journalArticlepeer-review

Abstract

The timely discovery and monitoring of fatigue cracks in steel structures is an important task in order to ensure structural integrity. However, off-the-shelf strain sensors are small and their deployment is too spatially localized to successfully locate new crack formation or growth within acceptable confidence. A solution is the use of large-area electronics capable of covering large surfaces. The authors have previously developed a sensing skin technology based on a soft elastomeric capacitor (SEC) that consists of a highly compliant, low-cost, and scalable strain gauge that transduces surface strain into a measurable change in capacitance. In prior work, the SEC was fabricated using three flat layers that formed a parallel plate capacitor. An improvement to that design has recently been proposed, in which the dielectric layer is textured using a corrugated pattern, and preliminary work showed a substantial improvement in sensing performance due to the added in-plane stiffness and decrease in the sensor's transverse Poisson's ratio. This paper extends preliminary work by studying the textured sensor's capability to quantify and discover a fatigue crack, and to study the general sensing performance in terms of linearity, sensitivity, resolution, and accuracy. Four specific corrugation patterns are investigated: a symmetric grid, a diagonal diagrid, a reinforced diagrid, and a non-symmetric re-entrant hexagonal honeycomb (auxetic) pattern. Experimental results show that the use of a texture results in a significant increase in sensing performance, with auxetic and reinforced diagrid patterns outperforming the other patterns. In particular, the auxetic and reinforced diagrid patterns allowed the discovery of a 0.28 mm and 0.31 mm fatigue crack, compared to a 0.53 mm crack for the untextured SEC, and resulted in up to 106% increase in sensitivity, 113% in linearity, 319% in resolution, and 582% in accuracy, compared to untextured SECs.

Original languageEnglish (US)
Article number105030
JournalSmart Materials and Structures
Volume30
Issue number10
DOIs
StatePublished - Oct 2021

Keywords

  • auxetic
  • capacitor
  • corrugation
  • fatigue crack
  • flexible strain gauge
  • sensing skin
  • structural health monitoring

ASJC Scopus subject areas

  • Signal Processing
  • Civil and Structural Engineering
  • Atomic and Molecular Physics, and Optics
  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Investigation of surface textured sensing skin for fatigue crack localization and quantification'. Together they form a unique fingerprint.

Cite this