Life cycle analysis for water and wastewater pipe materials

Fei Du, Gwendolyn J. Woods, Doosun Kang, Kevin E. Lansey, Robert G. Arnold

Research output: Contribution to journalArticlepeer-review

48 Scopus citations

Abstract

A life cycle analysis (LCA) was performed for six commonly used types of water and wastewater pipe materials: polyvinyl chloride (PVC), ductile iron, cast iron, high density polyethylene (HDPE), concrete, and reinforced concrete. The objectives were to (1) compare the six pipe materials in terms of global warming potential (GWP) through four LCA phases: pipe production, transport, installation, and use; (2) determine the primary source(s) of differences in LCA results; and (3) examine the effectiveness of currently used pipe size selection criteria when LCA GWP is considered. The results for unit lengths of discrete pipe sizes were used to generate functions relating GWP per kilometer of pipe to diameter and material selections. The LCA results were monetized using an emission penalty of 25/equivalent ton of CO2. For pipe diameters ≤61 cm (24 in.), GWP due to pipe manufacture, transport, and installation of ductile iron pipe was the largest among the six materials. At diameters ≥76 cm (30 in.), the GWP of PVC was highest. Concrete pipe resulted in the lowest GWP across the entire range of pipe sizes investigated. The GWP for pipe production, transport, and installation in a high-growth planning area in southeast Tucson, Arizona, was approximately one-tenth of the GWP derived from pipe network operation. The lifetime GWP from production, transport, and installation increased monotonically with pipe diameter for all materials analyzed, whereas, for a given flow, GWP from energy loss due to friction in flow simulations was inversely related to pipe diameter. The tradeoff suggests that there is an optimum diameter that minimizes lifetime GWP. However, optimum pipe sizes based on GWP were similar to pipe diameters selected based on economic cost alone, suggesting that LCA of water distribution and wastewater collection systems will not yield major changes in criteria for selection of pipe size.

Original languageEnglish (US)
Pages (from-to)703-711
Number of pages9
JournalJournal of Environmental Engineering (United States)
Volume139
Issue number5
DOIs
StatePublished - May 1 2013

Keywords

  • Global warming potential
  • Life cycle analysis
  • Pipe materials
  • Wastewater collection systems
  • Water distribution systems

ASJC Scopus subject areas

  • Environmental Engineering
  • Environmental Chemistry
  • Civil and Structural Engineering
  • Environmental Science(all)

Fingerprint

Dive into the research topics of 'Life cycle analysis for water and wastewater pipe materials'. Together they form a unique fingerprint.

Cite this