Liquid-solid partition ratios in nickel-base alloys

P. K. Sung, D. R. Poirier

Research output: Contribution to journalArticle

44 Scopus citations

Abstract

The equilibrium partition ratios of Al, Ta, and Cr in Ni-rich alloys of the Ni-Al-Ta-Cr system were experimentally determined by isothermally holding at a temperature in the liquid/solid range of the alloys followed by quenching. The partition ratios apply to equilibria between melts and γ phase (fcc) in the range of 1615 to 1694 K. It was found that the equilibrium partition ratios in this system depend mainly on the concentration of Ta. The equilibrium partition ratio of Ta varies from approximately 0.6 at dilute Ta to 0.85 at 17 wt pct Ta. For the same range of Ta contents, less variability is seen in the partition ratios of Al and Cr, which range from about 0.92 to 0.96. In addition to the partition ratios, the liquidus temperatures of the liquid in equilibrium with γ in the Ni-Al-Ta-Cr system were estimated with a multidimensional regression analysis. The experimental results reported herein are complemented by a compilation of partition ratios of many solutes in binary and multicomponent Ni-base alloys.

Original languageEnglish (US)
Pages (from-to)2173-2181
Number of pages9
JournalMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Volume30
Issue number8
DOIs
StatePublished - Jan 1 1999

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys

Fingerprint Dive into the research topics of 'Liquid-solid partition ratios in nickel-base alloys'. Together they form a unique fingerprint.

  • Cite this