Modelling Organosolv Pulping of Hemp

Bôke F. Tjeerdsma, Reyes Sierra-Alvarez, Frans H.A. Zomers, E. Clare Wilkinson

Research output: Contribution to journalArticle

51 Scopus citations

Abstract

Hemp (Cannabis sativa) stem wood chips were pulped in ethanol/water mixtures without additives, using lab-scale batch reactors. A central composite design was used to investigate autocatalyzed Organosolv pulping and to study the effect of process variables on pulp quality and yield. A second order polynomial regression model, using four independent process variables, was found to be appropriate for describing organosolv pulping of hemp stem wood fibres. The derived equations were able to predict the kappa number, the yield and the degree of polymerization of the pulp, with “adjusted R2” values of 76.3%, 94.3% and 83.9%, respectively. The overall Optimum pulping conditions, which maximize yield while subject to the restrictions of a kappa number lower than 30 and a DP exceeding 2500, were estimated at a pulping time of 171 minutes, a pulping temperature of 196°C, an ethanol concentration of 65% and a 1/w ratio of 13 ml g-1.

Original languageEnglish (US)
Pages (from-to)415-422
Number of pages8
JournalHolzforschung
Volume48
Issue number5
DOIs
StatePublished - Jan 1 1994
Externally publishedYes

Keywords

  • Autocatalyzed Organosolv pulping
  • Cannabis sativa
  • Central composite design
  • Delignification
  • Ethanol
  • Hemp stem wood
  • Modelling
  • Optimization

ASJC Scopus subject areas

  • Biomaterials

Fingerprint Dive into the research topics of 'Modelling Organosolv Pulping of Hemp'. Together they form a unique fingerprint.

  • Cite this

    Tjeerdsma, B. F., Sierra-Alvarez, R., Zomers, F. H. A., & Wilkinson, E. C. (1994). Modelling Organosolv Pulping of Hemp. Holzforschung, 48(5), 415-422. https://doi.org/10.1515/hfsg.1994.48.5.415