On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements

Darin Desilets, Marek G Zreda

Research output: Contribution to journalArticle

45 Citations (Scopus)

Abstract

The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7% in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20% in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.

Original languageEnglish (US)
Pages (from-to)213-225
Number of pages13
JournalEarth and Planetary Science Letters
Volume193
Issue number1-2
DOIs
StatePublished - 2001

Fingerprint

Cosmic ray measurement
nuclides
cosmic ray
Isotopes
cosmic rays
Neutrons
scaling
neutrons
Cosmic rays
spallation
dating
formulations
monitors
flux measurement
Cloud chambers
emulsion
geomagnetic field
Geochronology
solar activity
Fluxes

Keywords

  • Cosmic rays
  • Cosmogenic elements
  • Neutrons
  • Production
  • Rates
  • Scale factor

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Geophysics

Cite this

On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements. / Desilets, Darin; Zreda, Marek G.

In: Earth and Planetary Science Letters, Vol. 193, No. 1-2, 2001, p. 213-225.

Research output: Contribution to journalArticle

@article{2f641ef8ffe84a52ab4d43ab887eaf3d,
title = "On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements",
abstract = "The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7{\%} in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20{\%} in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.",
keywords = "Cosmic rays, Cosmogenic elements, Neutrons, Production, Rates, Scale factor",
author = "Darin Desilets and Zreda, {Marek G}",
year = "2001",
doi = "10.1016/S0012-821X(01)00477-0",
language = "English (US)",
volume = "193",
pages = "213--225",
journal = "Earth and Planetary Sciences Letters",
issn = "0012-821X",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements

AU - Desilets, Darin

AU - Zreda, Marek G

PY - 2001

Y1 - 2001

N2 - The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7% in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20% in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.

AB - The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7% in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20% in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.

KW - Cosmic rays

KW - Cosmogenic elements

KW - Neutrons

KW - Production

KW - Rates

KW - Scale factor

UR - http://www.scopus.com/inward/record.url?scp=0035657439&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035657439&partnerID=8YFLogxK

U2 - 10.1016/S0012-821X(01)00477-0

DO - 10.1016/S0012-821X(01)00477-0

M3 - Article

AN - SCOPUS:0035657439

VL - 193

SP - 213

EP - 225

JO - Earth and Planetary Sciences Letters

JF - Earth and Planetary Sciences Letters

SN - 0012-821X

IS - 1-2

ER -