Optical design in high density and high capacity multi-layer data storage system

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Fundamental requirements for optical system design for volume recording system is identified. Anastigmatic objective lens design is required for conventional page-based system, whereas for multi-layer volume recording systems, an Aplanatic and zoom optical design is needed with an afocal sub-optical system including a high numerical aperture (NA) objective element. An NA 0.4 and four element design is feasible by only using off-the-shelf components. Recording depth ranges of 0.4 mm for wavelength 532 nm and 0.2 mm for 405 nm. The design demonstrates sufficiently small as-built wavefront error, less than 0.1 waves while implementing focusing and tracking capabilities to the design.

Original languageEnglish (US)
Pages (from-to)425-436
Number of pages12
JournalFrontiers of Optoelectronics
Volume7
Issue number4
DOIs
StatePublished - Dec 18 2014

Fingerprint

Optical design
Data storage equipment
Optical systems
Wavefronts
Lenses
Systems analysis
Wavelength

Keywords

  • Holographic and volume memories
  • Lens system design
  • Optical disks

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

Optical design in high density and high capacity multi-layer data storage system. / Takashima, Yuzuru.

In: Frontiers of Optoelectronics, Vol. 7, No. 4, 18.12.2014, p. 425-436.

Research output: Contribution to journalArticle

@article{5409796ef5fb4ef5b4139922699027c6,
title = "Optical design in high density and high capacity multi-layer data storage system",
abstract = "Fundamental requirements for optical system design for volume recording system is identified. Anastigmatic objective lens design is required for conventional page-based system, whereas for multi-layer volume recording systems, an Aplanatic and zoom optical design is needed with an afocal sub-optical system including a high numerical aperture (NA) objective element. An NA 0.4 and four element design is feasible by only using off-the-shelf components. Recording depth ranges of 0.4 mm for wavelength 532 nm and 0.2 mm for 405 nm. The design demonstrates sufficiently small as-built wavefront error, less than 0.1 waves while implementing focusing and tracking capabilities to the design.",
keywords = "Holographic and volume memories, Lens system design, Optical disks",
author = "Yuzuru Takashima",
year = "2014",
month = "12",
day = "18",
doi = "10.1007/s12200-014-0416-4",
language = "English (US)",
volume = "7",
pages = "425--436",
journal = "Frontiers of Optoelectronics",
issn = "2095-2759",
publisher = "Springer Science + Business Media",
number = "4",

}

TY - JOUR

T1 - Optical design in high density and high capacity multi-layer data storage system

AU - Takashima, Yuzuru

PY - 2014/12/18

Y1 - 2014/12/18

N2 - Fundamental requirements for optical system design for volume recording system is identified. Anastigmatic objective lens design is required for conventional page-based system, whereas for multi-layer volume recording systems, an Aplanatic and zoom optical design is needed with an afocal sub-optical system including a high numerical aperture (NA) objective element. An NA 0.4 and four element design is feasible by only using off-the-shelf components. Recording depth ranges of 0.4 mm for wavelength 532 nm and 0.2 mm for 405 nm. The design demonstrates sufficiently small as-built wavefront error, less than 0.1 waves while implementing focusing and tracking capabilities to the design.

AB - Fundamental requirements for optical system design for volume recording system is identified. Anastigmatic objective lens design is required for conventional page-based system, whereas for multi-layer volume recording systems, an Aplanatic and zoom optical design is needed with an afocal sub-optical system including a high numerical aperture (NA) objective element. An NA 0.4 and four element design is feasible by only using off-the-shelf components. Recording depth ranges of 0.4 mm for wavelength 532 nm and 0.2 mm for 405 nm. The design demonstrates sufficiently small as-built wavefront error, less than 0.1 waves while implementing focusing and tracking capabilities to the design.

KW - Holographic and volume memories

KW - Lens system design

KW - Optical disks

UR - http://www.scopus.com/inward/record.url?scp=84919782943&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84919782943&partnerID=8YFLogxK

U2 - 10.1007/s12200-014-0416-4

DO - 10.1007/s12200-014-0416-4

M3 - Article

AN - SCOPUS:84919782943

VL - 7

SP - 425

EP - 436

JO - Frontiers of Optoelectronics

JF - Frontiers of Optoelectronics

SN - 2095-2759

IS - 4

ER -