Pre-production display R&D facility

A framework for developing flexible display systems reducing the war-fighters' load

Frederic Zenhausern, Gregory B. Raupp

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

There is an ever increasing need for lightweight, flexible, inexpensive integrated systems encompassing displays, sensors, computers, and other electronics to provide unprecedented information capability to a broad range of warfighters. During the next few years, a team of experts will be engaged in an intensive development program pursuing a two-pronged goal: (1) to integrate and fabricate reflective and emissive systems such as organic light emitting devices on flexible substrates including plastics, and (2) to develop materials and structural platforms that allow flexible backplane electronics to be integrated with ancillaries and display components, as well as to be mass-produced economically. An underlying theme of this effort continues to be leveraging emerging processing techniques, for example a-Si and poly-Si thin film transistor (TFT) technologies, but also advanced micro-contact pattern transfer techniques for producing low cost product with molecular structures for combined communication and electronic appliances. The initial technology integration target is a 4″ diagonal active matrix QVGA display on conformal plastic substrates. These advanced developments will be realized through a unique collaborative effort between the U.S. Army, Arizona State University (ASU) in close collaboration with its academic partners, and industry partners, who are united in our shared commitment to optimize the necessary production technologies for large area/large scale, low cost, cutting-edge display products and state-of-the-art manufacturing capabilities. The newly formed Flexible Display Center (FDC) at Arizona State University provides a one-of-a-kind environment fully dedicated to fulfill the major technical challenges not addressed by display manufacturers producing glass-based flat panel displays.

Original languageEnglish (US)
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
EditorsD.G. Hopper
Pages13-20
Number of pages8
Volume5443
DOIs
StatePublished - 2004
EventDefense, Security, and Cockpit Displays - Orlando, FL, United States
Duration: Apr 14 2004Apr 16 2004

Other

OtherDefense, Security, and Cockpit Displays
CountryUnited States
CityOrlando, FL
Period4/14/044/16/04

Fingerprint

Flexible displays
display devices
Display devices
plastics
electronics
flat panel displays
products
emerging
Plastics
Flexible electronics
molecular structure
transistors
manufacturing
platforms
communication
Flat panel displays
industries
Substrates
Thin film transistors
Polysilicon

Keywords

  • Backplane electronics
  • Electro-optical materials
  • Flexible displays
  • Organic Light Emitting Devices (OLEDs)
  • Thin Film Transistors (TFTs)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Zenhausern, F., & Raupp, G. B. (2004). Pre-production display R&D facility: A framework for developing flexible display systems reducing the war-fighters' load. In D. G. Hopper (Ed.), Proceedings of SPIE - The International Society for Optical Engineering (Vol. 5443, pp. 13-20). [3] https://doi.org/10.1117/12.561261

Pre-production display R&D facility : A framework for developing flexible display systems reducing the war-fighters' load. / Zenhausern, Frederic; Raupp, Gregory B.

Proceedings of SPIE - The International Society for Optical Engineering. ed. / D.G. Hopper. Vol. 5443 2004. p. 13-20 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zenhausern, F & Raupp, GB 2004, Pre-production display R&D facility: A framework for developing flexible display systems reducing the war-fighters' load. in DG Hopper (ed.), Proceedings of SPIE - The International Society for Optical Engineering. vol. 5443, 3, pp. 13-20, Defense, Security, and Cockpit Displays, Orlando, FL, United States, 4/14/04. https://doi.org/10.1117/12.561261
Zenhausern F, Raupp GB. Pre-production display R&D facility: A framework for developing flexible display systems reducing the war-fighters' load. In Hopper DG, editor, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 5443. 2004. p. 13-20. 3 https://doi.org/10.1117/12.561261
Zenhausern, Frederic ; Raupp, Gregory B. / Pre-production display R&D facility : A framework for developing flexible display systems reducing the war-fighters' load. Proceedings of SPIE - The International Society for Optical Engineering. editor / D.G. Hopper. Vol. 5443 2004. pp. 13-20
@inproceedings{d56298939a074a68b11fd85f33064a4b,
title = "Pre-production display R&D facility: A framework for developing flexible display systems reducing the war-fighters' load",
abstract = "There is an ever increasing need for lightweight, flexible, inexpensive integrated systems encompassing displays, sensors, computers, and other electronics to provide unprecedented information capability to a broad range of warfighters. During the next few years, a team of experts will be engaged in an intensive development program pursuing a two-pronged goal: (1) to integrate and fabricate reflective and emissive systems such as organic light emitting devices on flexible substrates including plastics, and (2) to develop materials and structural platforms that allow flexible backplane electronics to be integrated with ancillaries and display components, as well as to be mass-produced economically. An underlying theme of this effort continues to be leveraging emerging processing techniques, for example a-Si and poly-Si thin film transistor (TFT) technologies, but also advanced micro-contact pattern transfer techniques for producing low cost product with molecular structures for combined communication and electronic appliances. The initial technology integration target is a 4″ diagonal active matrix QVGA display on conformal plastic substrates. These advanced developments will be realized through a unique collaborative effort between the U.S. Army, Arizona State University (ASU) in close collaboration with its academic partners, and industry partners, who are united in our shared commitment to optimize the necessary production technologies for large area/large scale, low cost, cutting-edge display products and state-of-the-art manufacturing capabilities. The newly formed Flexible Display Center (FDC) at Arizona State University provides a one-of-a-kind environment fully dedicated to fulfill the major technical challenges not addressed by display manufacturers producing glass-based flat panel displays.",
keywords = "Backplane electronics, Electro-optical materials, Flexible displays, Organic Light Emitting Devices (OLEDs), Thin Film Transistors (TFTs)",
author = "Frederic Zenhausern and Raupp, {Gregory B.}",
year = "2004",
doi = "10.1117/12.561261",
language = "English (US)",
volume = "5443",
pages = "13--20",
editor = "D.G. Hopper",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - Pre-production display R&D facility

T2 - A framework for developing flexible display systems reducing the war-fighters' load

AU - Zenhausern, Frederic

AU - Raupp, Gregory B.

PY - 2004

Y1 - 2004

N2 - There is an ever increasing need for lightweight, flexible, inexpensive integrated systems encompassing displays, sensors, computers, and other electronics to provide unprecedented information capability to a broad range of warfighters. During the next few years, a team of experts will be engaged in an intensive development program pursuing a two-pronged goal: (1) to integrate and fabricate reflective and emissive systems such as organic light emitting devices on flexible substrates including plastics, and (2) to develop materials and structural platforms that allow flexible backplane electronics to be integrated with ancillaries and display components, as well as to be mass-produced economically. An underlying theme of this effort continues to be leveraging emerging processing techniques, for example a-Si and poly-Si thin film transistor (TFT) technologies, but also advanced micro-contact pattern transfer techniques for producing low cost product with molecular structures for combined communication and electronic appliances. The initial technology integration target is a 4″ diagonal active matrix QVGA display on conformal plastic substrates. These advanced developments will be realized through a unique collaborative effort between the U.S. Army, Arizona State University (ASU) in close collaboration with its academic partners, and industry partners, who are united in our shared commitment to optimize the necessary production technologies for large area/large scale, low cost, cutting-edge display products and state-of-the-art manufacturing capabilities. The newly formed Flexible Display Center (FDC) at Arizona State University provides a one-of-a-kind environment fully dedicated to fulfill the major technical challenges not addressed by display manufacturers producing glass-based flat panel displays.

AB - There is an ever increasing need for lightweight, flexible, inexpensive integrated systems encompassing displays, sensors, computers, and other electronics to provide unprecedented information capability to a broad range of warfighters. During the next few years, a team of experts will be engaged in an intensive development program pursuing a two-pronged goal: (1) to integrate and fabricate reflective and emissive systems such as organic light emitting devices on flexible substrates including plastics, and (2) to develop materials and structural platforms that allow flexible backplane electronics to be integrated with ancillaries and display components, as well as to be mass-produced economically. An underlying theme of this effort continues to be leveraging emerging processing techniques, for example a-Si and poly-Si thin film transistor (TFT) technologies, but also advanced micro-contact pattern transfer techniques for producing low cost product with molecular structures for combined communication and electronic appliances. The initial technology integration target is a 4″ diagonal active matrix QVGA display on conformal plastic substrates. These advanced developments will be realized through a unique collaborative effort between the U.S. Army, Arizona State University (ASU) in close collaboration with its academic partners, and industry partners, who are united in our shared commitment to optimize the necessary production technologies for large area/large scale, low cost, cutting-edge display products and state-of-the-art manufacturing capabilities. The newly formed Flexible Display Center (FDC) at Arizona State University provides a one-of-a-kind environment fully dedicated to fulfill the major technical challenges not addressed by display manufacturers producing glass-based flat panel displays.

KW - Backplane electronics

KW - Electro-optical materials

KW - Flexible displays

KW - Organic Light Emitting Devices (OLEDs)

KW - Thin Film Transistors (TFTs)

UR - http://www.scopus.com/inward/record.url?scp=11844280988&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=11844280988&partnerID=8YFLogxK

U2 - 10.1117/12.561261

DO - 10.1117/12.561261

M3 - Conference contribution

VL - 5443

SP - 13

EP - 20

BT - Proceedings of SPIE - The International Society for Optical Engineering

A2 - Hopper, D.G.

ER -