Redundant and Nonredundant Information for Model Calibration or Hydraulic Tomography

Jet Chau Wen, Jyun Lin Chen, Tian Chyi Jim Yeh, Yu Li Wang, Shao Yang Huang, Zhong Tian, Chia Yii Yu

Research output: Contribution to journalArticle

3 Scopus citations

Abstract

Drawdown data from independent pumping tests have widely been used to validate the estimated hydraulic parameters from inverse modeling or hydraulic tomography (HT). Yet, the independent pumping test has not been clearly defined. Therefore, the goal of this paper is to define this independent pumping test concept, based on the redundant or nonredundant information about aquifer heterogeneity embedded in the observed heads during cross-hole pumping tests. The definition of complete, moderate redundancy and high nonredundancy of information are stipulated using cross-correlation analysis of the relationship between the head and heterogeneity. Afterward, data from numerical experiments and field sequential pumping test campaigns reinforce the concept and the definition.

Original languageEnglish (US)
Pages (from-to)79-92
Number of pages14
JournalGroundwater
Volume58
Issue number1
DOIs
StatePublished - Jan 1 2020

ASJC Scopus subject areas

  • Water Science and Technology
  • Computers in Earth Sciences

Fingerprint Dive into the research topics of 'Redundant and Nonredundant Information for Model Calibration or Hydraulic Tomography'. Together they form a unique fingerprint.

  • Cite this

    Wen, J. C., Chen, J. L., Yeh, T. C. J., Wang, Y. L., Huang, S. Y., Tian, Z., & Yu, C. Y. (2020). Redundant and Nonredundant Information for Model Calibration or Hydraulic Tomography. Groundwater, 58(1), 79-92. https://doi.org/10.1111/gwat.12879