Single-phase liquid flow forced convection under a nearly uniform heat flux boundary condition in microchannels

Man Lee, Yi Kuen Lee, Yitshak Zohar

Research output: Contribution to journalArticle

3 Scopus citations

Abstract

A microchannel heat sink, integrated with pressure and temperature microsensors, is utilized to study single-phase liquid flow forced convection under a uniform heat flux boundary condition. Utilizing a waferbond-and-etch- back technology, the heat source, temperature and pressure sensors are encapsulated in a thin composite membrane capping the microchannels, thus allowing experimentally good control of the thermal boundary conditions. A three-dimensional physical model has been constructed to facilitate numerical simulations of the heat flux distribution. The results indicate that upstream the cold working fluid absorbs heat, while, within the current operating conditions, downstream the warmer working fluid releases heat. The Nusselt number is computed numerically and compared with experimental and analytical results. The wall Nusselt number in a microchannel can be estimated using classical analytical solutions only over a limited range of the Reynolds number, Re: both the top and bottom Nusselt numbers approach 4 for Re < 1, while the top and bottom Nusselt numbers approach 0 and 5.3, respectively, for Re > 100. The experimentally estimated Nusselt number for forced convection is highly sensitive to the location of the temperature measurements used in calculating the Nusselt number.

Original languageEnglish (US)
Article number035015
JournalJournal of Micromechanics and Microengineering
Volume22
Issue number3
DOIs
Publication statusPublished - Mar 2012

    Fingerprint

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Mechanics of Materials
  • Electronic, Optical and Magnetic Materials

Cite this