Smartphone-based, sensitive μPAD detection of urinary tract infection and gonorrhea

Soohee Cho, Tu San Park, Tigran G. Nahapetian, Jeong-Yeol Yoon

Research output: Contribution to journalArticle

51 Citations (Scopus)

Abstract

The presence of bacteria in urine can be used to monitor the onset or prognosis of urinary tract infection (UTI) and some sexually-transmitted diseases (STDs), such as gonorrhea. Typically, bacteria's presence in urine is confirmed by culturing samples overnight on agar plates, followed by a microscopic examination. Additionally, the presence of Escherichia coli in a urine sample can be indirectly confirmed through assaying for nitrite (generated by reducing nitrate in urine), however this is not sufficiently specific and sensitive. Species/strains identification of bacteria in a urine sample provides insight to appropriate antibiotic treatment options. In this work, a microfluidic paper analytical device (μPAD) was designed and fabricated for evaluating UTI (E. coli) and STD (Neisseria gonorrhoeae) from human urine samples. Anti-E. coli or anti-N. gonorrhoeae antibodies were conjugated to submicron particles then pre-loaded and dried in the center of each paper microfluidic channel. Human urine samples (undiluted) spiked with E. coli or N. gonorrhoeae were incubated for 5min with 1% Tween 80. The bacteria-spiked urine samples were then introduced to the inlet of paper microfluidic channel, which flowed through the channel by capillary force. Data confirms that proteins were not filtered by μPAD, which is essential for this assay. Urobilin, the component responsible for the yellow appearance of urine and green fluorescence emission, was filtered by μPAD, resulting in significantly minimized false-positive signals. This filtration was simultaneously made during the μPAD assay and no pretreatment/purification step was necessary. Antibody-conjugated particles were immunoagglutinated at the center of the paper channel. The extent of immunoagglutination was quantified by angle-specific Mie scatter under ambient lighting conditions, utilizing a smartphone camera as a detector. The total μPAD assay time was less than 30s. The detection limit was 10CFU/mL for both E. coli and N. gonorrhoeae, while commercially available gonorrhea rapid kit showed a detection limit of 10<sup>6</sup>CFU/mL. A commercially available nitrite assay test strip also had a detection limit of 10<sup>6</sup>CFU/mL, but this method is not antibody-based and thus not sufficiently specific. By optimizing the particle concentration, we were also able to extend the linear range of the assay up to 10<sup>7</sup>CFU/mL. The proposed prototype will serve as a low-cost, point-of-care, sensitive urinalysis biosensor to monitor UTI and gonorrhea from human urine.

Original languageEnglish (US)
Pages (from-to)601-611
Number of pages11
JournalBiosensors and Bioelectronics
Volume74
DOIs
StatePublished - Dec 5 2015

Fingerprint

Gonorrhea
Smartphones
Urinary Tract Infections
Escherichia coli
Assays
Urine
Bacteria
Equipment and Supplies
Microfluidics
Antibodies
Neisseria gonorrhoeae
Nitrites
Urobilin
Limit of Detection
Polysorbates
Antibiotics
Sexually Transmitted Diseases
Biosensors
Nitrates
Agar

Keywords

  • Escherichia coli
  • Neisseria gonorrhoeae
  • Paper microfluidics
  • Point-of-care
  • Smartphone
  • Urinalysis
  • Urobilin

ASJC Scopus subject areas

  • Biophysics
  • Biomedical Engineering
  • Biotechnology
  • Electrochemistry

Cite this

Smartphone-based, sensitive μPAD detection of urinary tract infection and gonorrhea. / Cho, Soohee; Park, Tu San; Nahapetian, Tigran G.; Yoon, Jeong-Yeol.

In: Biosensors and Bioelectronics, Vol. 74, 05.12.2015, p. 601-611.

Research output: Contribution to journalArticle

Cho, Soohee ; Park, Tu San ; Nahapetian, Tigran G. ; Yoon, Jeong-Yeol. / Smartphone-based, sensitive μPAD detection of urinary tract infection and gonorrhea. In: Biosensors and Bioelectronics. 2015 ; Vol. 74. pp. 601-611.
@article{9379911b4063443d8bd80f1b43aeac88,
title = "Smartphone-based, sensitive μPAD detection of urinary tract infection and gonorrhea",
abstract = "The presence of bacteria in urine can be used to monitor the onset or prognosis of urinary tract infection (UTI) and some sexually-transmitted diseases (STDs), such as gonorrhea. Typically, bacteria's presence in urine is confirmed by culturing samples overnight on agar plates, followed by a microscopic examination. Additionally, the presence of Escherichia coli in a urine sample can be indirectly confirmed through assaying for nitrite (generated by reducing nitrate in urine), however this is not sufficiently specific and sensitive. Species/strains identification of bacteria in a urine sample provides insight to appropriate antibiotic treatment options. In this work, a microfluidic paper analytical device (μPAD) was designed and fabricated for evaluating UTI (E. coli) and STD (Neisseria gonorrhoeae) from human urine samples. Anti-E. coli or anti-N. gonorrhoeae antibodies were conjugated to submicron particles then pre-loaded and dried in the center of each paper microfluidic channel. Human urine samples (undiluted) spiked with E. coli or N. gonorrhoeae were incubated for 5min with 1{\%} Tween 80. The bacteria-spiked urine samples were then introduced to the inlet of paper microfluidic channel, which flowed through the channel by capillary force. Data confirms that proteins were not filtered by μPAD, which is essential for this assay. Urobilin, the component responsible for the yellow appearance of urine and green fluorescence emission, was filtered by μPAD, resulting in significantly minimized false-positive signals. This filtration was simultaneously made during the μPAD assay and no pretreatment/purification step was necessary. Antibody-conjugated particles were immunoagglutinated at the center of the paper channel. The extent of immunoagglutination was quantified by angle-specific Mie scatter under ambient lighting conditions, utilizing a smartphone camera as a detector. The total μPAD assay time was less than 30s. The detection limit was 10CFU/mL for both E. coli and N. gonorrhoeae, while commercially available gonorrhea rapid kit showed a detection limit of 106CFU/mL. A commercially available nitrite assay test strip also had a detection limit of 106CFU/mL, but this method is not antibody-based and thus not sufficiently specific. By optimizing the particle concentration, we were also able to extend the linear range of the assay up to 107CFU/mL. The proposed prototype will serve as a low-cost, point-of-care, sensitive urinalysis biosensor to monitor UTI and gonorrhea from human urine.",
keywords = "Escherichia coli, Neisseria gonorrhoeae, Paper microfluidics, Point-of-care, Smartphone, Urinalysis, Urobilin",
author = "Soohee Cho and Park, {Tu San} and Nahapetian, {Tigran G.} and Jeong-Yeol Yoon",
year = "2015",
month = "12",
day = "5",
doi = "10.1016/j.bios.2015.07.014",
language = "English (US)",
volume = "74",
pages = "601--611",
journal = "Biosensors",
issn = "0956-5663",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Smartphone-based, sensitive μPAD detection of urinary tract infection and gonorrhea

AU - Cho, Soohee

AU - Park, Tu San

AU - Nahapetian, Tigran G.

AU - Yoon, Jeong-Yeol

PY - 2015/12/5

Y1 - 2015/12/5

N2 - The presence of bacteria in urine can be used to monitor the onset or prognosis of urinary tract infection (UTI) and some sexually-transmitted diseases (STDs), such as gonorrhea. Typically, bacteria's presence in urine is confirmed by culturing samples overnight on agar plates, followed by a microscopic examination. Additionally, the presence of Escherichia coli in a urine sample can be indirectly confirmed through assaying for nitrite (generated by reducing nitrate in urine), however this is not sufficiently specific and sensitive. Species/strains identification of bacteria in a urine sample provides insight to appropriate antibiotic treatment options. In this work, a microfluidic paper analytical device (μPAD) was designed and fabricated for evaluating UTI (E. coli) and STD (Neisseria gonorrhoeae) from human urine samples. Anti-E. coli or anti-N. gonorrhoeae antibodies were conjugated to submicron particles then pre-loaded and dried in the center of each paper microfluidic channel. Human urine samples (undiluted) spiked with E. coli or N. gonorrhoeae were incubated for 5min with 1% Tween 80. The bacteria-spiked urine samples were then introduced to the inlet of paper microfluidic channel, which flowed through the channel by capillary force. Data confirms that proteins were not filtered by μPAD, which is essential for this assay. Urobilin, the component responsible for the yellow appearance of urine and green fluorescence emission, was filtered by μPAD, resulting in significantly minimized false-positive signals. This filtration was simultaneously made during the μPAD assay and no pretreatment/purification step was necessary. Antibody-conjugated particles were immunoagglutinated at the center of the paper channel. The extent of immunoagglutination was quantified by angle-specific Mie scatter under ambient lighting conditions, utilizing a smartphone camera as a detector. The total μPAD assay time was less than 30s. The detection limit was 10CFU/mL for both E. coli and N. gonorrhoeae, while commercially available gonorrhea rapid kit showed a detection limit of 106CFU/mL. A commercially available nitrite assay test strip also had a detection limit of 106CFU/mL, but this method is not antibody-based and thus not sufficiently specific. By optimizing the particle concentration, we were also able to extend the linear range of the assay up to 107CFU/mL. The proposed prototype will serve as a low-cost, point-of-care, sensitive urinalysis biosensor to monitor UTI and gonorrhea from human urine.

AB - The presence of bacteria in urine can be used to monitor the onset or prognosis of urinary tract infection (UTI) and some sexually-transmitted diseases (STDs), such as gonorrhea. Typically, bacteria's presence in urine is confirmed by culturing samples overnight on agar plates, followed by a microscopic examination. Additionally, the presence of Escherichia coli in a urine sample can be indirectly confirmed through assaying for nitrite (generated by reducing nitrate in urine), however this is not sufficiently specific and sensitive. Species/strains identification of bacteria in a urine sample provides insight to appropriate antibiotic treatment options. In this work, a microfluidic paper analytical device (μPAD) was designed and fabricated for evaluating UTI (E. coli) and STD (Neisseria gonorrhoeae) from human urine samples. Anti-E. coli or anti-N. gonorrhoeae antibodies were conjugated to submicron particles then pre-loaded and dried in the center of each paper microfluidic channel. Human urine samples (undiluted) spiked with E. coli or N. gonorrhoeae were incubated for 5min with 1% Tween 80. The bacteria-spiked urine samples were then introduced to the inlet of paper microfluidic channel, which flowed through the channel by capillary force. Data confirms that proteins were not filtered by μPAD, which is essential for this assay. Urobilin, the component responsible for the yellow appearance of urine and green fluorescence emission, was filtered by μPAD, resulting in significantly minimized false-positive signals. This filtration was simultaneously made during the μPAD assay and no pretreatment/purification step was necessary. Antibody-conjugated particles were immunoagglutinated at the center of the paper channel. The extent of immunoagglutination was quantified by angle-specific Mie scatter under ambient lighting conditions, utilizing a smartphone camera as a detector. The total μPAD assay time was less than 30s. The detection limit was 10CFU/mL for both E. coli and N. gonorrhoeae, while commercially available gonorrhea rapid kit showed a detection limit of 106CFU/mL. A commercially available nitrite assay test strip also had a detection limit of 106CFU/mL, but this method is not antibody-based and thus not sufficiently specific. By optimizing the particle concentration, we were also able to extend the linear range of the assay up to 107CFU/mL. The proposed prototype will serve as a low-cost, point-of-care, sensitive urinalysis biosensor to monitor UTI and gonorrhea from human urine.

KW - Escherichia coli

KW - Neisseria gonorrhoeae

KW - Paper microfluidics

KW - Point-of-care

KW - Smartphone

KW - Urinalysis

KW - Urobilin

UR - http://www.scopus.com/inward/record.url?scp=84937158298&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937158298&partnerID=8YFLogxK

U2 - 10.1016/j.bios.2015.07.014

DO - 10.1016/j.bios.2015.07.014

M3 - Article

C2 - 26190472

AN - SCOPUS:84937158298

VL - 74

SP - 601

EP - 611

JO - Biosensors

JF - Biosensors

SN - 0956-5663

ER -