Strain characteristics of additive manufactured polyvinylidene fluoride (PVDF) actuators

Ethan D. Burnham-Fay, Tue Le, Joshua A. Tarbutton, Jonathan D. Ellis

Research output: Contribution to journalArticle

11 Scopus citations

Abstract

Polyvinyldene fluoride (PVDF) polymer piezoelectric actuators were manufactured using an electric poling-assisted additive manufacturing (EPAM) process and tested for actuation strain in the thickness direction. A heterodyne interferometer was used to measure the strain developed by the actuators as a function of applied voltage. Results were compared to a commercially available ceramic lead–zirconium–titanate (PZT) actuator. The EPAM PVDF samples exhibit strains up to 8.78 mϵ, compared to 1.7 mϵ developed by PZT samples at their maximum working voltages in linear ramp testing (860 V for EPAM PVDF and 200 V for PZT). The response of the EPAM PVDF samples to an applied force was tested to measure the piezoelectric effect, although no actual piezoelectric constants are calculated with this method. Results show that strain measurements of EPAM PVDF samples were up to 5.2 times greater than comparable measurements of PZT samples. However, the degree of piezoelectricity between EPAM PVDF samples varies so quality control is required for the EPAM process to ensure sample performance.

Original languageEnglish (US)
Pages (from-to)85-92
Number of pages8
JournalSensors and Actuators, A: Physical
Volume266
DOIs
StatePublished - Oct 15 2017
Externally publishedYes

Keywords

  • Actuator
  • Additive manufacturing
  • Piezoelectric
  • Piezoelectric polymer
  • PVDF

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Strain characteristics of additive manufactured polyvinylidene fluoride (PVDF) actuators'. Together they form a unique fingerprint.

  • Cite this