STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES.

P. I K Onorato, M. N. Alexander, C. W. Struck, G. W. Tasker, Donald R Uhlmann

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The authors performed new XPS measurements on these glasses, using a Physical Electronics 548 spectrometer using a Mg K alpha x-ray source. The Au-dot calibration method of Stephenson and Binkowski was adapted to the analysis of fracture surfaces formed in high vacuum. The binding energies are thus measured relative to the Fermi level of the insulator through the Fermi level of the Au calibrant. Moreover, the method avoids spurious spectral features caused by uncontrolled charging of the insulating sample. All data were digitized, fed to a mini-computer, signal averaged, deconvoluted to remove the Mg K alpha //2 contribution to the raw width, and smoothed.

Original languageEnglish (US)
Title of host publicationElectrochemical Society Extended Abstracts
PublisherElectrochemical Soc
Pages625-626
Number of pages2
Volume85-1
StatePublished - 1985
Externally publishedYes

Fingerprint

Aluminosilicates
Fermi level
Glass
Binding energy
Spectrometers
Electronic equipment
X ray photoelectron spectroscopy
Calibration
Vacuum
X rays

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Onorato, P. I. K., Alexander, M. N., Struck, C. W., Tasker, G. W., & Uhlmann, D. R. (1985). STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES. In Electrochemical Society Extended Abstracts (Vol. 85-1, pp. 625-626). Electrochemical Soc.

STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES. / Onorato, P. I K; Alexander, M. N.; Struck, C. W.; Tasker, G. W.; Uhlmann, Donald R.

Electrochemical Society Extended Abstracts. Vol. 85-1 Electrochemical Soc, 1985. p. 625-626.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Onorato, PIK, Alexander, MN, Struck, CW, Tasker, GW & Uhlmann, DR 1985, STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES. in Electrochemical Society Extended Abstracts. vol. 85-1, Electrochemical Soc, pp. 625-626.
Onorato PIK, Alexander MN, Struck CW, Tasker GW, Uhlmann DR. STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES. In Electrochemical Society Extended Abstracts. Vol. 85-1. Electrochemical Soc. 1985. p. 625-626
Onorato, P. I K ; Alexander, M. N. ; Struck, C. W. ; Tasker, G. W. ; Uhlmann, Donald R. / STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES. Electrochemical Society Extended Abstracts. Vol. 85-1 Electrochemical Soc, 1985. pp. 625-626
@inproceedings{0b9aef586f5b4ee1b2c94d799dce10e9,
title = "STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES.",
abstract = "The authors performed new XPS measurements on these glasses, using a Physical Electronics 548 spectrometer using a Mg K alpha x-ray source. The Au-dot calibration method of Stephenson and Binkowski was adapted to the analysis of fracture surfaces formed in high vacuum. The binding energies are thus measured relative to the Fermi level of the insulator through the Fermi level of the Au calibrant. Moreover, the method avoids spurious spectral features caused by uncontrolled charging of the insulating sample. All data were digitized, fed to a mini-computer, signal averaged, deconvoluted to remove the Mg K alpha //2 contribution to the raw width, and smoothed.",
author = "Onorato, {P. I K} and Alexander, {M. N.} and Struck, {C. W.} and Tasker, {G. W.} and Uhlmann, {Donald R}",
year = "1985",
language = "English (US)",
volume = "85-1",
pages = "625--626",
booktitle = "Electrochemical Society Extended Abstracts",
publisher = "Electrochemical Soc",

}

TY - GEN

T1 - STRUCTURE OF ALKALI ALUMINOSILICATE GLASSES.

AU - Onorato, P. I K

AU - Alexander, M. N.

AU - Struck, C. W.

AU - Tasker, G. W.

AU - Uhlmann, Donald R

PY - 1985

Y1 - 1985

N2 - The authors performed new XPS measurements on these glasses, using a Physical Electronics 548 spectrometer using a Mg K alpha x-ray source. The Au-dot calibration method of Stephenson and Binkowski was adapted to the analysis of fracture surfaces formed in high vacuum. The binding energies are thus measured relative to the Fermi level of the insulator through the Fermi level of the Au calibrant. Moreover, the method avoids spurious spectral features caused by uncontrolled charging of the insulating sample. All data were digitized, fed to a mini-computer, signal averaged, deconvoluted to remove the Mg K alpha //2 contribution to the raw width, and smoothed.

AB - The authors performed new XPS measurements on these glasses, using a Physical Electronics 548 spectrometer using a Mg K alpha x-ray source. The Au-dot calibration method of Stephenson and Binkowski was adapted to the analysis of fracture surfaces formed in high vacuum. The binding energies are thus measured relative to the Fermi level of the insulator through the Fermi level of the Au calibrant. Moreover, the method avoids spurious spectral features caused by uncontrolled charging of the insulating sample. All data were digitized, fed to a mini-computer, signal averaged, deconvoluted to remove the Mg K alpha //2 contribution to the raw width, and smoothed.

UR - http://www.scopus.com/inward/record.url?scp=17444444952&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=17444444952&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:17444444952

VL - 85-1

SP - 625

EP - 626

BT - Electrochemical Society Extended Abstracts

PB - Electrochemical Soc

ER -