The benefit of using multiple thin tanks versus a short big tank for thermal storage in ceramic-sphere packed bed with airflow

Yan Wang, Peiwen Li, Zhifeng Wang, Bei Yang, Guofeng Yuan

Research output: Contribution to journalArticle

Abstract

To make a better thermal storage system that uses air as the heat transfer fluid flowing through a packed-bed of ceramic spheres (Al2O3) as thermal storage materials, the present work studied cases using multiple small-diameter thin tanks to replace a large-diameter big tank while keeping the same total volume and the same air flow rate. Performance analysis of thermal storage has been conducted for comparison and optimization. The long flow passage and faster flow velocity of air in the small-diameter tanks was found to significantly benefit thermal storage performance compared with that of a short big tank. It resulted in a longer duration of discharge of high-temperature airflow, if the same operation time is applied to the two situations. The faster airflow enhances the heat transfer between air and thermal storage material, although it incurs larger pressure loss. Overall, the energy storage efficiency of using several thin tanks can be significantly better than that of using a big short tank if the height-to-diameter ratio in the multiple thin tanks is properly optimized. The optimization methodology and results are of great significance to the development of thermal storage systems that use air as heat transfer fluid and rocks or ceramic spheres as the packed-bed material for thermal storage.

Original languageEnglish (US)
Article number021002
JournalJournal of Solar Energy Engineering, Transactions of the ASME
Volume142
Issue number2
DOIs
StatePublished - Apr 1 2020

Fingerprint

Packed beds
Air
Heat transfer
Fluids
Hot Temperature
Flow velocity
Energy storage
Rocks
Flow rate

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology

Cite this

The benefit of using multiple thin tanks versus a short big tank for thermal storage in ceramic-sphere packed bed with airflow. / Wang, Yan; Li, Peiwen; Wang, Zhifeng; Yang, Bei; Yuan, Guofeng.

In: Journal of Solar Energy Engineering, Transactions of the ASME, Vol. 142, No. 2, 021002, 01.04.2020.

Research output: Contribution to journalArticle

@article{85075326282b4a4fb393d949a606bb41,
title = "The benefit of using multiple thin tanks versus a short big tank for thermal storage in ceramic-sphere packed bed with airflow",
abstract = "To make a better thermal storage system that uses air as the heat transfer fluid flowing through a packed-bed of ceramic spheres (Al2O3) as thermal storage materials, the present work studied cases using multiple small-diameter thin tanks to replace a large-diameter big tank while keeping the same total volume and the same air flow rate. Performance analysis of thermal storage has been conducted for comparison and optimization. The long flow passage and faster flow velocity of air in the small-diameter tanks was found to significantly benefit thermal storage performance compared with that of a short big tank. It resulted in a longer duration of discharge of high-temperature airflow, if the same operation time is applied to the two situations. The faster airflow enhances the heat transfer between air and thermal storage material, although it incurs larger pressure loss. Overall, the energy storage efficiency of using several thin tanks can be significantly better than that of using a big short tank if the height-to-diameter ratio in the multiple thin tanks is properly optimized. The optimization methodology and results are of great significance to the development of thermal storage systems that use air as heat transfer fluid and rocks or ceramic spheres as the packed-bed material for thermal storage.",
author = "Yan Wang and Peiwen Li and Zhifeng Wang and Bei Yang and Guofeng Yuan",
year = "2020",
month = "4",
day = "1",
doi = "10.1115/1.4044768",
language = "English (US)",
volume = "142",
journal = "Journal of Solar Energy Engineering, Transactions of the ASME",
issn = "0199-6231",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "2",

}

TY - JOUR

T1 - The benefit of using multiple thin tanks versus a short big tank for thermal storage in ceramic-sphere packed bed with airflow

AU - Wang, Yan

AU - Li, Peiwen

AU - Wang, Zhifeng

AU - Yang, Bei

AU - Yuan, Guofeng

PY - 2020/4/1

Y1 - 2020/4/1

N2 - To make a better thermal storage system that uses air as the heat transfer fluid flowing through a packed-bed of ceramic spheres (Al2O3) as thermal storage materials, the present work studied cases using multiple small-diameter thin tanks to replace a large-diameter big tank while keeping the same total volume and the same air flow rate. Performance analysis of thermal storage has been conducted for comparison and optimization. The long flow passage and faster flow velocity of air in the small-diameter tanks was found to significantly benefit thermal storage performance compared with that of a short big tank. It resulted in a longer duration of discharge of high-temperature airflow, if the same operation time is applied to the two situations. The faster airflow enhances the heat transfer between air and thermal storage material, although it incurs larger pressure loss. Overall, the energy storage efficiency of using several thin tanks can be significantly better than that of using a big short tank if the height-to-diameter ratio in the multiple thin tanks is properly optimized. The optimization methodology and results are of great significance to the development of thermal storage systems that use air as heat transfer fluid and rocks or ceramic spheres as the packed-bed material for thermal storage.

AB - To make a better thermal storage system that uses air as the heat transfer fluid flowing through a packed-bed of ceramic spheres (Al2O3) as thermal storage materials, the present work studied cases using multiple small-diameter thin tanks to replace a large-diameter big tank while keeping the same total volume and the same air flow rate. Performance analysis of thermal storage has been conducted for comparison and optimization. The long flow passage and faster flow velocity of air in the small-diameter tanks was found to significantly benefit thermal storage performance compared with that of a short big tank. It resulted in a longer duration of discharge of high-temperature airflow, if the same operation time is applied to the two situations. The faster airflow enhances the heat transfer between air and thermal storage material, although it incurs larger pressure loss. Overall, the energy storage efficiency of using several thin tanks can be significantly better than that of using a big short tank if the height-to-diameter ratio in the multiple thin tanks is properly optimized. The optimization methodology and results are of great significance to the development of thermal storage systems that use air as heat transfer fluid and rocks or ceramic spheres as the packed-bed material for thermal storage.

UR - http://www.scopus.com/inward/record.url?scp=85072535781&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85072535781&partnerID=8YFLogxK

U2 - 10.1115/1.4044768

DO - 10.1115/1.4044768

M3 - Article

VL - 142

JO - Journal of Solar Energy Engineering, Transactions of the ASME

JF - Journal of Solar Energy Engineering, Transactions of the ASME

SN - 0199-6231

IS - 2

M1 - 021002

ER -