The supercam 8-pixel integrated focal plane unit

C. Groppi, D. Golish, Christopher K Walker, B. Love, C. Kulesa, S. Weinreb, J. Kooi, A. Lichtenberger

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The SuperCam 64 beam focal plane is constructed from eight linear array modules with eight pixels each. Each pixel consists of a sensitive, single ended SIS mixer optimized for operation from 320-380 GHz, with measured noise temperatures of ~75K. The array mixers utilize SIS devices fabricated on Silicon-On-Insulator (SOI) substrates, with beam lead supports and electrical contacts. The 1x8 mixer subarrays are constructed from tellurium copper using the splitblock technique. Stainless steel guide pins and screws are used to ensure proper alignment and good contact between parts. A diagonal feedhorn extension block is bolted to the front of the mixer array assembly, extending the diagonal horns to 11mm aperture size. This eliminates the need for dielectric lenses and their associated manufacturing and alignment difficulties. The waveguide environment is designed around full height rectangular waveguide, with a fixed quarter wave backshort. IF outputs from the SIS devices are bonded directly to the input matching networks of low-noise, InP MMIC amplifier modules located in the array mixers. The IF center frequency of the array is 5 GHz. The MMIC chip is contained in an 11mm x 11mm amplifier module that contains integrated bias tees for the SIS device and the amplifier chip. The module achieves noise temperature of ~5 K and delivers 32 dB of gain while consuming only 8 mW of power. Several tests have been performed with these modules to ensure oscillation free operation, low noise, high stability, and no heating effects on the SIS device. Modules have been integrated into both single pixel and 1x8 array mixers, and have shown performance as good or better than expected with connectorized amplifiers. No heating effects are visible, although care must be taken to avoid oscillation due to feedback. Short lengths of semi-rigid cable inside each mixer block ensure that the output from the LNA cannot radiate into the mixer block cavity, preventing oscillations. We present the design, fabrication and measured performance of the Supercam 1x8 FPU modules, along with the design and performance of the integrated LNA modules and SIS devices.

Original languageEnglish (US)
Title of host publication22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011
PublisherInternational Symposium on Space Terahertz Technology
Pages78
Number of pages1
StatePublished - 2011
Event22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011 - Tucson, AZ, United States
Duration: Apr 25 2011Apr 28 2011

Other

Other22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011
CountryUnited States
CityTucson, AZ
Period4/25/114/28/11

Fingerprint

pixel
modules
Pixels
pixels
Monolithic microwave integrated circuits
Heating
Rectangular waveguides
Tellurium
amplifiers
oscillation
noise temperature
Lenses
Cables
Waveguides
Stainless steel
Lead
low noise
heating
Copper
Feedback

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Space and Planetary Science
  • Electrical and Electronic Engineering
  • Atomic and Molecular Physics, and Optics
  • Radiation

Cite this

Groppi, C., Golish, D., Walker, C. K., Love, B., Kulesa, C., Weinreb, S., ... Lichtenberger, A. (2011). The supercam 8-pixel integrated focal plane unit. In 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011 (pp. 78). International Symposium on Space Terahertz Technology.

The supercam 8-pixel integrated focal plane unit. / Groppi, C.; Golish, D.; Walker, Christopher K; Love, B.; Kulesa, C.; Weinreb, S.; Kooi, J.; Lichtenberger, A.

22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology, 2011. p. 78.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Groppi, C, Golish, D, Walker, CK, Love, B, Kulesa, C, Weinreb, S, Kooi, J & Lichtenberger, A 2011, The supercam 8-pixel integrated focal plane unit. in 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology, pp. 78, 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011, Tucson, AZ, United States, 4/25/11.
Groppi C, Golish D, Walker CK, Love B, Kulesa C, Weinreb S et al. The supercam 8-pixel integrated focal plane unit. In 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology. 2011. p. 78
Groppi, C. ; Golish, D. ; Walker, Christopher K ; Love, B. ; Kulesa, C. ; Weinreb, S. ; Kooi, J. ; Lichtenberger, A. / The supercam 8-pixel integrated focal plane unit. 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011. International Symposium on Space Terahertz Technology, 2011. pp. 78
@inproceedings{bcc3b190b34045b39b00d8997377f116,
title = "The supercam 8-pixel integrated focal plane unit",
abstract = "The SuperCam 64 beam focal plane is constructed from eight linear array modules with eight pixels each. Each pixel consists of a sensitive, single ended SIS mixer optimized for operation from 320-380 GHz, with measured noise temperatures of ~75K. The array mixers utilize SIS devices fabricated on Silicon-On-Insulator (SOI) substrates, with beam lead supports and electrical contacts. The 1x8 mixer subarrays are constructed from tellurium copper using the splitblock technique. Stainless steel guide pins and screws are used to ensure proper alignment and good contact between parts. A diagonal feedhorn extension block is bolted to the front of the mixer array assembly, extending the diagonal horns to 11mm aperture size. This eliminates the need for dielectric lenses and their associated manufacturing and alignment difficulties. The waveguide environment is designed around full height rectangular waveguide, with a fixed quarter wave backshort. IF outputs from the SIS devices are bonded directly to the input matching networks of low-noise, InP MMIC amplifier modules located in the array mixers. The IF center frequency of the array is 5 GHz. The MMIC chip is contained in an 11mm x 11mm amplifier module that contains integrated bias tees for the SIS device and the amplifier chip. The module achieves noise temperature of ~5 K and delivers 32 dB of gain while consuming only 8 mW of power. Several tests have been performed with these modules to ensure oscillation free operation, low noise, high stability, and no heating effects on the SIS device. Modules have been integrated into both single pixel and 1x8 array mixers, and have shown performance as good or better than expected with connectorized amplifiers. No heating effects are visible, although care must be taken to avoid oscillation due to feedback. Short lengths of semi-rigid cable inside each mixer block ensure that the output from the LNA cannot radiate into the mixer block cavity, preventing oscillations. We present the design, fabrication and measured performance of the Supercam 1x8 FPU modules, along with the design and performance of the integrated LNA modules and SIS devices.",
author = "C. Groppi and D. Golish and Walker, {Christopher K} and B. Love and C. Kulesa and S. Weinreb and J. Kooi and A. Lichtenberger",
year = "2011",
language = "English (US)",
pages = "78",
booktitle = "22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011",
publisher = "International Symposium on Space Terahertz Technology",

}

TY - GEN

T1 - The supercam 8-pixel integrated focal plane unit

AU - Groppi, C.

AU - Golish, D.

AU - Walker, Christopher K

AU - Love, B.

AU - Kulesa, C.

AU - Weinreb, S.

AU - Kooi, J.

AU - Lichtenberger, A.

PY - 2011

Y1 - 2011

N2 - The SuperCam 64 beam focal plane is constructed from eight linear array modules with eight pixels each. Each pixel consists of a sensitive, single ended SIS mixer optimized for operation from 320-380 GHz, with measured noise temperatures of ~75K. The array mixers utilize SIS devices fabricated on Silicon-On-Insulator (SOI) substrates, with beam lead supports and electrical contacts. The 1x8 mixer subarrays are constructed from tellurium copper using the splitblock technique. Stainless steel guide pins and screws are used to ensure proper alignment and good contact between parts. A diagonal feedhorn extension block is bolted to the front of the mixer array assembly, extending the diagonal horns to 11mm aperture size. This eliminates the need for dielectric lenses and their associated manufacturing and alignment difficulties. The waveguide environment is designed around full height rectangular waveguide, with a fixed quarter wave backshort. IF outputs from the SIS devices are bonded directly to the input matching networks of low-noise, InP MMIC amplifier modules located in the array mixers. The IF center frequency of the array is 5 GHz. The MMIC chip is contained in an 11mm x 11mm amplifier module that contains integrated bias tees for the SIS device and the amplifier chip. The module achieves noise temperature of ~5 K and delivers 32 dB of gain while consuming only 8 mW of power. Several tests have been performed with these modules to ensure oscillation free operation, low noise, high stability, and no heating effects on the SIS device. Modules have been integrated into both single pixel and 1x8 array mixers, and have shown performance as good or better than expected with connectorized amplifiers. No heating effects are visible, although care must be taken to avoid oscillation due to feedback. Short lengths of semi-rigid cable inside each mixer block ensure that the output from the LNA cannot radiate into the mixer block cavity, preventing oscillations. We present the design, fabrication and measured performance of the Supercam 1x8 FPU modules, along with the design and performance of the integrated LNA modules and SIS devices.

AB - The SuperCam 64 beam focal plane is constructed from eight linear array modules with eight pixels each. Each pixel consists of a sensitive, single ended SIS mixer optimized for operation from 320-380 GHz, with measured noise temperatures of ~75K. The array mixers utilize SIS devices fabricated on Silicon-On-Insulator (SOI) substrates, with beam lead supports and electrical contacts. The 1x8 mixer subarrays are constructed from tellurium copper using the splitblock technique. Stainless steel guide pins and screws are used to ensure proper alignment and good contact between parts. A diagonal feedhorn extension block is bolted to the front of the mixer array assembly, extending the diagonal horns to 11mm aperture size. This eliminates the need for dielectric lenses and their associated manufacturing and alignment difficulties. The waveguide environment is designed around full height rectangular waveguide, with a fixed quarter wave backshort. IF outputs from the SIS devices are bonded directly to the input matching networks of low-noise, InP MMIC amplifier modules located in the array mixers. The IF center frequency of the array is 5 GHz. The MMIC chip is contained in an 11mm x 11mm amplifier module that contains integrated bias tees for the SIS device and the amplifier chip. The module achieves noise temperature of ~5 K and delivers 32 dB of gain while consuming only 8 mW of power. Several tests have been performed with these modules to ensure oscillation free operation, low noise, high stability, and no heating effects on the SIS device. Modules have been integrated into both single pixel and 1x8 array mixers, and have shown performance as good or better than expected with connectorized amplifiers. No heating effects are visible, although care must be taken to avoid oscillation due to feedback. Short lengths of semi-rigid cable inside each mixer block ensure that the output from the LNA cannot radiate into the mixer block cavity, preventing oscillations. We present the design, fabrication and measured performance of the Supercam 1x8 FPU modules, along with the design and performance of the integrated LNA modules and SIS devices.

UR - http://www.scopus.com/inward/record.url?scp=84896962361&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84896962361&partnerID=8YFLogxK

M3 - Conference contribution

SP - 78

BT - 22nd International Symposium on Space Terahertz Technology 2011, ISSTT 2011

PB - International Symposium on Space Terahertz Technology

ER -