Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates

Krzysztof Grabowski, Mateusz Gawronski, Ireneusz Baran, Wojciech Spychalski, Wieslaw J. Staszewski, Tadeusz Uhl, Tribikram Kundu, Pawel Packo

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

Acoustic Emission used in Non-Destructive Testing is focused on analysis of elastic waves propagating in mechanical structures. Then any information carried by generated acoustic waves, further recorded by a set of transducers, allow to determine integrity of these structures. It is clear that material properties and geometry strongly impacts the result. In this paper a method for Acoustic Emission source localization in thin plates is presented. The approach is based on the Time-Distance Domain Transform, that is a wavenumber-frequency mapping technique for precise event localization. The major advantage of the technique is dispersion compensation through a phase-shifting of investigated waveforms in order to acquire the most accurate output, allowing for source-sensor distance estimation using a single transducer. The accuracy and robustness of the above process are also investigated. This includes the study of Young's modulus value and numerical parameters influence on damage detection. By merging the Time-Distance Domain Transform with an optimal distance selection technique, an identification-localization algorithm is achieved. The method is investigated analytically, numerically and experimentally. The latter involves both laboratory and large scale industrial tests.

Original languageEnglish (US)
Pages (from-to)142-149
Number of pages8
JournalUltrasonics
Volume68
DOIs
StatePublished - May 1 2016

Fingerprint

acoustic emission
transducers
thin plates
elastic waves
integrity
modulus of elasticity
waveforms
damage
acoustics
output
sensors
geometry

Keywords

  • Acoustic Emission
  • Dispersion
  • Source localization
  • Time-distance domain transform
  • Wave propagation

ASJC Scopus subject areas

  • Acoustics and Ultrasonics

Cite this

Grabowski, K., Gawronski, M., Baran, I., Spychalski, W., Staszewski, W. J., Uhl, T., ... Packo, P. (2016). Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates. Ultrasonics, 68, 142-149. https://doi.org/10.1016/j.ultras.2016.02.015

Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates. / Grabowski, Krzysztof; Gawronski, Mateusz; Baran, Ireneusz; Spychalski, Wojciech; Staszewski, Wieslaw J.; Uhl, Tadeusz; Kundu, Tribikram; Packo, Pawel.

In: Ultrasonics, Vol. 68, 01.05.2016, p. 142-149.

Research output: Contribution to journalArticle

Grabowski, K, Gawronski, M, Baran, I, Spychalski, W, Staszewski, WJ, Uhl, T, Kundu, T & Packo, P 2016, 'Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates', Ultrasonics, vol. 68, pp. 142-149. https://doi.org/10.1016/j.ultras.2016.02.015
Grabowski K, Gawronski M, Baran I, Spychalski W, Staszewski WJ, Uhl T et al. Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates. Ultrasonics. 2016 May 1;68:142-149. https://doi.org/10.1016/j.ultras.2016.02.015
Grabowski, Krzysztof ; Gawronski, Mateusz ; Baran, Ireneusz ; Spychalski, Wojciech ; Staszewski, Wieslaw J. ; Uhl, Tadeusz ; Kundu, Tribikram ; Packo, Pawel. / Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates. In: Ultrasonics. 2016 ; Vol. 68. pp. 142-149.
@article{a23689bd9c4645edba6ebab7ecbd8862,
title = "Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates",
abstract = "Acoustic Emission used in Non-Destructive Testing is focused on analysis of elastic waves propagating in mechanical structures. Then any information carried by generated acoustic waves, further recorded by a set of transducers, allow to determine integrity of these structures. It is clear that material properties and geometry strongly impacts the result. In this paper a method for Acoustic Emission source localization in thin plates is presented. The approach is based on the Time-Distance Domain Transform, that is a wavenumber-frequency mapping technique for precise event localization. The major advantage of the technique is dispersion compensation through a phase-shifting of investigated waveforms in order to acquire the most accurate output, allowing for source-sensor distance estimation using a single transducer. The accuracy and robustness of the above process are also investigated. This includes the study of Young's modulus value and numerical parameters influence on damage detection. By merging the Time-Distance Domain Transform with an optimal distance selection technique, an identification-localization algorithm is achieved. The method is investigated analytically, numerically and experimentally. The latter involves both laboratory and large scale industrial tests.",
keywords = "Acoustic Emission, Dispersion, Source localization, Time-distance domain transform, Wave propagation",
author = "Krzysztof Grabowski and Mateusz Gawronski and Ireneusz Baran and Wojciech Spychalski and Staszewski, {Wieslaw J.} and Tadeusz Uhl and Tribikram Kundu and Pawel Packo",
year = "2016",
month = "5",
day = "1",
doi = "10.1016/j.ultras.2016.02.015",
language = "English (US)",
volume = "68",
pages = "142--149",
journal = "Ultrasonics",
issn = "0041-624X",
publisher = "Elsevier",

}

TY - JOUR

T1 - Time-distance domain transformation for Acoustic Emission source localization in thin metallic plates

AU - Grabowski, Krzysztof

AU - Gawronski, Mateusz

AU - Baran, Ireneusz

AU - Spychalski, Wojciech

AU - Staszewski, Wieslaw J.

AU - Uhl, Tadeusz

AU - Kundu, Tribikram

AU - Packo, Pawel

PY - 2016/5/1

Y1 - 2016/5/1

N2 - Acoustic Emission used in Non-Destructive Testing is focused on analysis of elastic waves propagating in mechanical structures. Then any information carried by generated acoustic waves, further recorded by a set of transducers, allow to determine integrity of these structures. It is clear that material properties and geometry strongly impacts the result. In this paper a method for Acoustic Emission source localization in thin plates is presented. The approach is based on the Time-Distance Domain Transform, that is a wavenumber-frequency mapping technique for precise event localization. The major advantage of the technique is dispersion compensation through a phase-shifting of investigated waveforms in order to acquire the most accurate output, allowing for source-sensor distance estimation using a single transducer. The accuracy and robustness of the above process are also investigated. This includes the study of Young's modulus value and numerical parameters influence on damage detection. By merging the Time-Distance Domain Transform with an optimal distance selection technique, an identification-localization algorithm is achieved. The method is investigated analytically, numerically and experimentally. The latter involves both laboratory and large scale industrial tests.

AB - Acoustic Emission used in Non-Destructive Testing is focused on analysis of elastic waves propagating in mechanical structures. Then any information carried by generated acoustic waves, further recorded by a set of transducers, allow to determine integrity of these structures. It is clear that material properties and geometry strongly impacts the result. In this paper a method for Acoustic Emission source localization in thin plates is presented. The approach is based on the Time-Distance Domain Transform, that is a wavenumber-frequency mapping technique for precise event localization. The major advantage of the technique is dispersion compensation through a phase-shifting of investigated waveforms in order to acquire the most accurate output, allowing for source-sensor distance estimation using a single transducer. The accuracy and robustness of the above process are also investigated. This includes the study of Young's modulus value and numerical parameters influence on damage detection. By merging the Time-Distance Domain Transform with an optimal distance selection technique, an identification-localization algorithm is achieved. The method is investigated analytically, numerically and experimentally. The latter involves both laboratory and large scale industrial tests.

KW - Acoustic Emission

KW - Dispersion

KW - Source localization

KW - Time-distance domain transform

KW - Wave propagation

UR - http://www.scopus.com/inward/record.url?scp=84959481917&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84959481917&partnerID=8YFLogxK

U2 - 10.1016/j.ultras.2016.02.015

DO - 10.1016/j.ultras.2016.02.015

M3 - Article

VL - 68

SP - 142

EP - 149

JO - Ultrasonics

JF - Ultrasonics

SN - 0041-624X

ER -