Timing recovery for two-dimensional modulation codes

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Two-dimensional modulation codes were recently introduced as a method to increase data storage densities. These codes are a generalization of the usual run-length-limited (d, k) codes and provide for increased storage density by relaxing the k-constraint and encoding multiple tracks in parallel. The use of these codes requires that timing information be derived from multiple tracks read in parallel. This paper introduces a timing recovery circuit for use by systems that employ two dimensional modulation codes. The circuit generalizes the familiar square-and-filter approach. Computer simulations are used to determine the performance of this circuit in terms of peak-to-peak jitter vs. signal to noise ratio at various pulse densities. Another circuit introduced in this paper is used to remove relative time-shift from adjacent tracks. This circuit is necessary for proper operation of the timing recovery circuit in systems with removable media.

Original languageEnglish (US)
Title of host publication1992 International Conference on Communications
Subtitle of host publicationDiscovering a New World of Communications, SUPERCOMM/ICC 1992 - Conference Record
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1361-1365
Number of pages5
ISBN (Electronic)078030599X
DOIs
StatePublished - Jan 1 1992
Event1992 IEEE International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992 - Chicago, United States
Duration: Jun 14 1992Jun 18 1992

Publication series

NameIEEE International Conference on Communications
ISSN (Print)1550-3607

Conference

Conference1992 IEEE International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992
CountryUnited States
CityChicago
Period6/14/926/18/92

Fingerprint

Modulation
Recovery
Networks (circuits)
Jitter
Signal to noise ratio
Data storage equipment
Computer simulation

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering

Cite this

Ma, A. K., & Marcellin, M. W. (1992). Timing recovery for two-dimensional modulation codes. In 1992 International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992 - Conference Record (pp. 1361-1365). [268105] (IEEE International Conference on Communications). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICC.1992.268105

Timing recovery for two-dimensional modulation codes. / Ma, Alan K.; Marcellin, Michael W.

1992 International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992 - Conference Record. Institute of Electrical and Electronics Engineers Inc., 1992. p. 1361-1365 268105 (IEEE International Conference on Communications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ma, AK & Marcellin, MW 1992, Timing recovery for two-dimensional modulation codes. in 1992 International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992 - Conference Record., 268105, IEEE International Conference on Communications, Institute of Electrical and Electronics Engineers Inc., pp. 1361-1365, 1992 IEEE International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992, Chicago, United States, 6/14/92. https://doi.org/10.1109/ICC.1992.268105
Ma AK, Marcellin MW. Timing recovery for two-dimensional modulation codes. In 1992 International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992 - Conference Record. Institute of Electrical and Electronics Engineers Inc. 1992. p. 1361-1365. 268105. (IEEE International Conference on Communications). https://doi.org/10.1109/ICC.1992.268105
Ma, Alan K. ; Marcellin, Michael W. / Timing recovery for two-dimensional modulation codes. 1992 International Conference on Communications: Discovering a New World of Communications, SUPERCOMM/ICC 1992 - Conference Record. Institute of Electrical and Electronics Engineers Inc., 1992. pp. 1361-1365 (IEEE International Conference on Communications).
@inproceedings{4975fc818ce84dac907b4679864b9b55,
title = "Timing recovery for two-dimensional modulation codes",
abstract = "Two-dimensional modulation codes were recently introduced as a method to increase data storage densities. These codes are a generalization of the usual run-length-limited (d, k) codes and provide for increased storage density by relaxing the k-constraint and encoding multiple tracks in parallel. The use of these codes requires that timing information be derived from multiple tracks read in parallel. This paper introduces a timing recovery circuit for use by systems that employ two dimensional modulation codes. The circuit generalizes the familiar square-and-filter approach. Computer simulations are used to determine the performance of this circuit in terms of peak-to-peak jitter vs. signal to noise ratio at various pulse densities. Another circuit introduced in this paper is used to remove relative time-shift from adjacent tracks. This circuit is necessary for proper operation of the timing recovery circuit in systems with removable media.",
author = "Ma, {Alan K.} and Marcellin, {Michael W}",
year = "1992",
month = "1",
day = "1",
doi = "10.1109/ICC.1992.268105",
language = "English (US)",
series = "IEEE International Conference on Communications",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "1361--1365",
booktitle = "1992 International Conference on Communications",

}

TY - GEN

T1 - Timing recovery for two-dimensional modulation codes

AU - Ma, Alan K.

AU - Marcellin, Michael W

PY - 1992/1/1

Y1 - 1992/1/1

N2 - Two-dimensional modulation codes were recently introduced as a method to increase data storage densities. These codes are a generalization of the usual run-length-limited (d, k) codes and provide for increased storage density by relaxing the k-constraint and encoding multiple tracks in parallel. The use of these codes requires that timing information be derived from multiple tracks read in parallel. This paper introduces a timing recovery circuit for use by systems that employ two dimensional modulation codes. The circuit generalizes the familiar square-and-filter approach. Computer simulations are used to determine the performance of this circuit in terms of peak-to-peak jitter vs. signal to noise ratio at various pulse densities. Another circuit introduced in this paper is used to remove relative time-shift from adjacent tracks. This circuit is necessary for proper operation of the timing recovery circuit in systems with removable media.

AB - Two-dimensional modulation codes were recently introduced as a method to increase data storage densities. These codes are a generalization of the usual run-length-limited (d, k) codes and provide for increased storage density by relaxing the k-constraint and encoding multiple tracks in parallel. The use of these codes requires that timing information be derived from multiple tracks read in parallel. This paper introduces a timing recovery circuit for use by systems that employ two dimensional modulation codes. The circuit generalizes the familiar square-and-filter approach. Computer simulations are used to determine the performance of this circuit in terms of peak-to-peak jitter vs. signal to noise ratio at various pulse densities. Another circuit introduced in this paper is used to remove relative time-shift from adjacent tracks. This circuit is necessary for proper operation of the timing recovery circuit in systems with removable media.

UR - http://www.scopus.com/inward/record.url?scp=84943731053&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84943731053&partnerID=8YFLogxK

U2 - 10.1109/ICC.1992.268105

DO - 10.1109/ICC.1992.268105

M3 - Conference contribution

AN - SCOPUS:84943731053

T3 - IEEE International Conference on Communications

SP - 1361

EP - 1365

BT - 1992 International Conference on Communications

PB - Institute of Electrical and Electronics Engineers Inc.

ER -