Using the Kelvin-Voigt model for nanoindentation creep in Sn-C/PVDF nanocomposites

S. A. Hackney, Katerina E Aifantis, A. Tangtrakarn, S. Shrivastava

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

In the present work, nanoindentation was used to examine the creep behaviour of nanostructured Sn-C/polyvinylidene fluoride composites, which are promising anodes for next generation Li ion batteries. Modifying the Kelvin-Voigt model using the stresses and strains that develop upon constant load nanoindentation allowed for an analysis that fits the experimental data. The resulting fits provided estimates for the elastic modulus and viscosity. The modulus and viscosity are found to vary significantly with position on the sample but are within range of accepted values. A comparison of the Kelvin-Voigt derived modulus with the Maxwell solid derived creep corrected Oliver-Pharr method was of the same order, but the trends did not match between the two models. The dissipated creep strain energy (DCSE), which has been used as a measure of damage in viscous-elastic composites, was examined for the Kelvin-Voigt model derived modulus and viscosity. The DCSE may be a relevant parameter for Li ion anode lifetime prediction.

Original languageEnglish (US)
Pages (from-to)1161-1166
Number of pages6
JournalMaterials Science and Technology
Volume28
Issue number9-10
DOIs
StatePublished - Oct 2012
Externally publishedYes

Fingerprint

Nanoindentation
nanoindentation
Nanocomposites
nanocomposites
Creep
viscosity
anodes
Viscosity
Strain energy
Anodes
composite materials
vinylidene
fluorides
electric batteries
modulus of elasticity
Composite materials
ions
damage
trends
Loads (forces)

Keywords

  • Creep
  • Kelvin-Voight
  • Nanostructured
  • Sn/C anodes

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Using the Kelvin-Voigt model for nanoindentation creep in Sn-C/PVDF nanocomposites. / Hackney, S. A.; Aifantis, Katerina E; Tangtrakarn, A.; Shrivastava, S.

In: Materials Science and Technology, Vol. 28, No. 9-10, 10.2012, p. 1161-1166.

Research output: Contribution to journalArticle

Hackney, S. A. ; Aifantis, Katerina E ; Tangtrakarn, A. ; Shrivastava, S. / Using the Kelvin-Voigt model for nanoindentation creep in Sn-C/PVDF nanocomposites. In: Materials Science and Technology. 2012 ; Vol. 28, No. 9-10. pp. 1161-1166.
@article{892aa4fbca2b4d08a120a4c0b3a93d9f,
title = "Using the Kelvin-Voigt model for nanoindentation creep in Sn-C/PVDF nanocomposites",
abstract = "In the present work, nanoindentation was used to examine the creep behaviour of nanostructured Sn-C/polyvinylidene fluoride composites, which are promising anodes for next generation Li ion batteries. Modifying the Kelvin-Voigt model using the stresses and strains that develop upon constant load nanoindentation allowed for an analysis that fits the experimental data. The resulting fits provided estimates for the elastic modulus and viscosity. The modulus and viscosity are found to vary significantly with position on the sample but are within range of accepted values. A comparison of the Kelvin-Voigt derived modulus with the Maxwell solid derived creep corrected Oliver-Pharr method was of the same order, but the trends did not match between the two models. The dissipated creep strain energy (DCSE), which has been used as a measure of damage in viscous-elastic composites, was examined for the Kelvin-Voigt model derived modulus and viscosity. The DCSE may be a relevant parameter for Li ion anode lifetime prediction.",
keywords = "Creep, Kelvin-Voight, Nanostructured, Sn/C anodes",
author = "Hackney, {S. A.} and Aifantis, {Katerina E} and A. Tangtrakarn and S. Shrivastava",
year = "2012",
month = "10",
doi = "10.1179/1743284712Y.0000000063",
language = "English (US)",
volume = "28",
pages = "1161--1166",
journal = "Materials Science and Technology",
issn = "0267-0836",
publisher = "Maney Publishing",
number = "9-10",

}

TY - JOUR

T1 - Using the Kelvin-Voigt model for nanoindentation creep in Sn-C/PVDF nanocomposites

AU - Hackney, S. A.

AU - Aifantis, Katerina E

AU - Tangtrakarn, A.

AU - Shrivastava, S.

PY - 2012/10

Y1 - 2012/10

N2 - In the present work, nanoindentation was used to examine the creep behaviour of nanostructured Sn-C/polyvinylidene fluoride composites, which are promising anodes for next generation Li ion batteries. Modifying the Kelvin-Voigt model using the stresses and strains that develop upon constant load nanoindentation allowed for an analysis that fits the experimental data. The resulting fits provided estimates for the elastic modulus and viscosity. The modulus and viscosity are found to vary significantly with position on the sample but are within range of accepted values. A comparison of the Kelvin-Voigt derived modulus with the Maxwell solid derived creep corrected Oliver-Pharr method was of the same order, but the trends did not match between the two models. The dissipated creep strain energy (DCSE), which has been used as a measure of damage in viscous-elastic composites, was examined for the Kelvin-Voigt model derived modulus and viscosity. The DCSE may be a relevant parameter for Li ion anode lifetime prediction.

AB - In the present work, nanoindentation was used to examine the creep behaviour of nanostructured Sn-C/polyvinylidene fluoride composites, which are promising anodes for next generation Li ion batteries. Modifying the Kelvin-Voigt model using the stresses and strains that develop upon constant load nanoindentation allowed for an analysis that fits the experimental data. The resulting fits provided estimates for the elastic modulus and viscosity. The modulus and viscosity are found to vary significantly with position on the sample but are within range of accepted values. A comparison of the Kelvin-Voigt derived modulus with the Maxwell solid derived creep corrected Oliver-Pharr method was of the same order, but the trends did not match between the two models. The dissipated creep strain energy (DCSE), which has been used as a measure of damage in viscous-elastic composites, was examined for the Kelvin-Voigt model derived modulus and viscosity. The DCSE may be a relevant parameter for Li ion anode lifetime prediction.

KW - Creep

KW - Kelvin-Voight

KW - Nanostructured

KW - Sn/C anodes

UR - http://www.scopus.com/inward/record.url?scp=84866052296&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84866052296&partnerID=8YFLogxK

U2 - 10.1179/1743284712Y.0000000063

DO - 10.1179/1743284712Y.0000000063

M3 - Article

VL - 28

SP - 1161

EP - 1166

JO - Materials Science and Technology

JF - Materials Science and Technology

SN - 0267-0836

IS - 9-10

ER -